Is it possible to reset the SBC hydraulic pump?
Reset operation time / cycle of SBC Hydraulic Pump. It is possible to reset the SBC Hydraulic Pump using Star Diagnostics. Please be aware that if you do this you could loose the brakes while driving which could cause serious injuries or death. Here are the instructions. Use at your own risk.
Why is my SBC pump not working on my Mercedes?
Your SBC pump is defective and you loose all the braking or have reduced braking power. The SBC pump which creates pressure and applies that pressure to the brakes when you push the brake pedal is not working properly. This error is common issue on Mercedes E Class W211, SL R230, CLS Class with SBC Error CODE C249F.
What is the SBC brake failure error code?
Some of the errors reported are: 1 SBC Control module failure 2 STOP VEHICLE displayed on instrument cluster 3 Brake defective stop vehicle 4 REDUCED BRAKING POWER – VISIT WORKSHOP (Replace brake light switch first.)
Do you need ABS unit for Mercedes SBC?
ABS Control Unit. This may not be applicable to vehicles with Code 213. The electronic brake service tool (EP21RENT) is required to deactivate the brake system before replacement of the SBC hydraulic unit.
What’s the difference between hydraulic ABS and SBC?
The Brake-By-Wire Sensotronic Brake Control (SBC) system is quite different to the conventional hydraulic abs braking system because it doesn’t have a brake servo at the reservoir to start with and the brake pedal is connected to the ECU by wire.
Reset operation time / cycle of SBC Hydraulic Pump. It is possible to reset the SBC Hydraulic Pump using Star Diagnostics. Please be aware that if you do this you could loose the brakes while driving which could cause serious injuries or death. Here are the instructions. Use at your own risk.
Is the SBC hydraulic unit under extended warranty?
The SBC Hydraulic Unit extended warranty applies to all conditions that justify the replacement of the SBC Hydraulic Unit and specific listed components under the standard New Vehicle Limited Warranty terms and conditions.
How does SBC work on a Mercedes Benz?
Once this happens, the Sensotronic Brake Control (SBC) system is de-activated and the hydraulic braking function mode is activated whereby limited braking pressure is applied to the front brakes thus increasing the braking distance.