How much does a new flywheel cost?
When you add it all up, the average car owner is going to have to pay somewhere between $500 and $1,000 in most cases for flywheel replacement. That makes it one of the most expensive parts to replace in your powertrain.
How do you remove a flywheel from a Mercury outboard motor?
You can remove the flywheel from a mercury outboard motor by keeping the flywheel stationary and using a special tool called a flywheel puller. Step 1 Unlatch the clips that are used to secure the cover and take the cover off the motor. Step 2
When do I need to change the flywheel?
You will rarely need to replace the flywheel, but the flywheel should be resurfaced whenever the clutch disc is replaced in a high-mileage car, and that can be easily done when the clutch assembly has been removed.
Can a universal flywheel puller be used on a Mercury?
If you cannot find a flywheel that is specific to a mercury you can use a universal flywheel puller. Do not strike the bolt in the center of the flywheel puller with a hammer or other object because you can damage the crankshaft. Cameron Easey has over 15 years customer service experience, with eight of those years in the insurance industry.
What happens to the clutch when the flywheel is worn?
When severely worn, the clutch will “slip,” losing traction against the flywheel; this will result in the engine racing without transmitting power to the transmission, particularly under load or hard acceleration. The clutch release bearing can also become worn.
You will rarely need to replace the flywheel, but the flywheel should be resurfaced whenever the clutch disc is replaced in a high-mileage car, and that can be easily done when the clutch assembly has been removed.
How does a flywheel get put back together?
From there, once all of these components are removed, the new flywheel will be installed and all parts will be put back together in reverse order. Lastly, the engine oil will be refilled and the engine will be started to test the flywheel.
When severely worn, the clutch will “slip,” losing traction against the flywheel; this will result in the engine racing without transmitting power to the transmission, particularly under load or hard acceleration. The clutch release bearing can also become worn.
Can a drive coupler be replaced in a MerCruiser?
This is a step by step as best as I can make it on how to replace the engine coupler, sometimes called a drive coupler, in a mercruiser powered boat. This process will be generally the same for all mercruiser engines. Loading…