Why does my car have a bad MAF code?
This code is most commonly caused by a dirty, obstructed, or faulty MAF sensor, but can also be caused by issues including: Damage to the intake boot; Vacuum leaks; Clogged or improperly installed engine air filter; Clogged-up cat converter or restricted exhaust
What can cause a bad MAF sensor signal?
The MAF sensor signal is also used to calculate engine load, meaning it can cause trouble for the traction control system, or change the automatic shifting pattern in applicable vehicles. This code is most commonly caused by a dirty, obstructed, or faulty MAF sensor, but can also be caused by issues including:
What are the symptoms of a bad mass air flow sensor?
3 Symptoms of a Bad Mass Air Flow Sensor. 1 Your Car Hesitates or Suddenly Jerks Forward While Accelerating. A bad MAF sensor can cause your vehicle to experience poor drivability issues such as 2 Your Air Fuel Ratio is Too Rich. 3 Your Air Fuel Ratio is Too Lean. 4 Your OBD-II Scanner Gets Code P0101.
Why are two cylinders not firing from the same coil pack?
If you have one or two cylinders not firing from the same coil pack (trace the HT leads back to the coil pack, there are two coil packs taking two HT leads each). You could try swapping the coil packs and see if the problem moves with it (i.e. the other two cylinders stop firing and the ones that weren’t firing start firing).
What causes a check engine light on a MAF?
The first indicator that you might have a problem with the MAF is the presence of a check engine light (CEL) on your dashboard. The check engine lamp can be caused by a wide variety of problems with the engine: you need to read the codes from the computer to get a starting clue as to what the problem is.
What causes a cylinder to misfire in a Mercedes?
In most cases, a cylinder misfire is caused either due to old spark plugs that need to be replaced. A failed ignition coil or a bad spark plug wires. If none of the above fixes your misfire problem carefully analyze the fault codes, it is possible that misfire may be indirectly caused by another problem in the engine.
Can a clogged catalytic converter cause a misfire?
A catalytic converter that is clogged and is restricting the exhaust gasses from leaving the engine can also trigger multiple cylinder misfire. If your catalytic converter is clogged you will notice a drastic drop in fuel efficiency and real struggle getting your Mercedes to accelerate. If the cat is completely clogged your car won’t even start.
Where are misfire codes stored in a Mercedes?
Luckily for you, the misfire codes are stored in the ECU and are very easy (and inexpensive) to retrieve. To diagnose an engine misfire on a Mercedes all you need is a generic OBD II code reader that can be bought in some cases for under 20 at your local auto parts store or on Amazon’s Best Selling OBD II scanners list.