How do you remove a door panel on a Mercedes W123?
Using a wide pry tool, like this trim removal tool, go around the edge of the panel between it and the metal part of the door. You will find it held in place by plastic clips. Gently pry each clip out all the way around. On an older car like the W123, there will likely be some broken clips.
Why is tapered washer missing from Mercedes door panel?
The tapered washer is sometimes missing. It is used to protect the panel from wear. Using a wide pry tool, like this trim removal tool, go around the edge of the panel between it and the metal part of the door. You will find it held in place by plastic clips. Gently pry each clip out all the way around.
What are the door panels on a Mercedes Benz?
This article applies to the Mercedes-Benz C-Class w204 (2007-2014). Door panels on all vehicles usually house things like the door speakers, seat controls, puddle lights, power window switches, and power mirror tilt control.
Where is the chrome panel on a Mercedes W123?
On the driver’s side door, with no upper section of the arm on the door panel, the chrome panel behind the door pull can simply be removed and set aside at this point. On the other three doors, the chrome panel is a part of the upper arm on the door panel.
How do you remove the door panel on a Mercedes?
There is a square clip near the lock that secures the door panel to the frame. Gently pull the door panel out. Then, insert the pliers into the crack between the panel and the frame. Push down on the peg release mechanism of the square clip, and remove it.
How do you remove trim from a door?
Open the door and use a trim removal tool to pry out the armrest cover. Remove the two Hex screws with your T27 Torx screwdriver. Use the trim removal tool to pry out and loosen the A-pillar tweeter housing. The trim can then be gently removed by hand. Figure 1. Remove the door panel covers. Figure 2. Remove the A-pillar tweeter housing.
How long does it take to remove a door panel?
Removing the door panel is an easy task that you can accomplish in as little as 20 min. You will need a set of Torx sockets. To remove the door panel, you will need your screwdrivers, trim plastic wedge but also must have Torx Bit Socket Set if you need to take any other componenet off the door.
Where are the screws on the door panel?
The mounting screws on the door panel are located under the armrest cover. First, disconnect the negative lead (black) from the battery terminal. Open the door and use a trim removal tool to pry out the armrest cover. Remove the two Hex screws with your T27 Torx screwdriver.
Using a wide pry tool, like this trim removal tool, go around the edge of the panel between it and the metal part of the door. You will find it held in place by plastic clips. Gently pry each clip out all the way around. On an older car like the W123, there will likely be some broken clips.
The tapered washer is sometimes missing. It is used to protect the panel from wear. Using a wide pry tool, like this trim removal tool, go around the edge of the panel between it and the metal part of the door. You will find it held in place by plastic clips. Gently pry each clip out all the way around.
Why is my door not working on my 123?
Secondly, the latch mechanism can fail and the door will not stay shut. There is a part inside the latch that breaks. Finally on some of the later 123 models they used a white plastic part inside to control the door lock function. When this plastic part fails you will not be able to lock or unlock the door with the key.
On the driver’s side door, with no upper section of the arm on the door panel, the chrome panel behind the door pull can simply be removed and set aside at this point. On the other three doors, the chrome panel is a part of the upper arm on the door panel.
How do you remove a door panel from a car?
Insert a screwdriver into the edge of the armrest cover and pry it off. The armrest cover may be concealing a fastening screw. Take a flathead screwdriver and wedge it into the crack at the edge of the panel. Apply gentle pressure to pop it out and remove it.
How do you remove trim from a crank?
Use a finger to push the tab that holds the trim piece to the crank out until it clears the crank. Pull trim toward the knob on the crank to release the trim. The trim piece will release from the peg at the base of the crank. The crank will now slide off.