When did the Mercedes Benz Airmatic suspension system come out?
The Mercedes-Benz AIRMATIC suspension system was introduced in 1999 on the S-Class and has subsequently been used on the E-Class and most of the automaker’s SUVs. The system employs electronically controlled air springs that provide an ideal balance of ride comfort and handling.
What to do if your Airmatic suspension goes bad?
If a problematic AIRMATIC suspension comes into your shop (one that is dead or intermittently leaving the vehicle on the bump stops), one of the first things to check is the high-amperage fuse for the compressor. The relay can fail on either the “on” or “off” position.
How to troubleshoot Mercedes Benz air suspension problems?
Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.
Where are the springs on a Mercedes Benz Airmatic?
The rear springs on some AIRMATIC suspensions can be labor-intensive to replace, while others are as easy as replacing a strut. The 2003-’09 E-Class (W211) is known for leaking rear springs. These springs mount to the lower control arm and the sub-frame.
What happens when Mercedes Benz air suspension stops working?
When they stop working the air suspension control unit may no longer be able to recognize the height of the car. Your Mercedes-Benz will greet you with a warning message on the dash related to the airmatic failure. The car height may be correct and the car still rides fine, it’s just that the computer doesn’t know that.
What should I do if my air suspension doesn’t work?
This will difficult to track down without a scanner. If you get the AIRMATIC Visit Workshop message, your car may still drive but do get it checked out as soon as possible. If the car drops over the next few days, the air suspension may not work to airlift the car. “AIRMATIC STOP, CAR TOO LOW!” This message may be scary. Don’t panic!
Where is the level sensor on Mercedes Benz air suspension?
If you need help with troubleshooting the airmatic valve assembly watch this video. Level sensor is faulty They are located at the rear and front suspension. When they stop working the air suspension control unit may no longer be able to recognize the height of the car.
Why does my car keep saying AIRMATIC VISIT WORKSHOP?
It could also be that there is a discontinuity problem with any of the air suspensions components. This will difficult to track down without a scanner. If you get the AIRMATIC Visit Workshop message, your car may still drive but do get it checked out as soon as possible.
Where are the levels on a Mercedes Benz Airmatic system?
The levels sensors are mounted on a bracket near the upper control arms on the front of the vehicle. Each sensor is connected to a link rod attached directly to the upper control arm. The sensors produce a voltage that the Airmatic Control Module translates to axle height.
Which is Air Lift products fit your ride?
Which Air Lift products fit your ride? Need Help? We’re here to answer your questions. Locate a retailer near you. money-back guarantee. the long haul. We use cookies to ensure your best experience. Through your continued use of this site you accept this use. For more information, please see our privacy policy . Your cart is currently empty.
The Mercedes-Benz AIRMATIC suspension system was introduced in 1999 on the S-Class and has subsequently been used on the E-Class and most of the automaker’s SUVs. The system employs electronically controlled air springs that provide an ideal balance of ride comfort and handling.
What do I need to replace Airmatic air compressor?
For this repair you will a replacement airmatic air compressor. A toolbox with your standard sockets, screwdrivers and pliers should be all you need to complete this job. It will be helpful if you have an anti-seize spray to help remove the bolts. Here is list of tools you should have to complete this job.
If a problematic AIRMATIC suspension comes into your shop (one that is dead or intermittently leaving the vehicle on the bump stops), one of the first things to check is the high-amperage fuse for the compressor. The relay can fail on either the “on” or “off” position.
The levels sensors are mounted on a bracket near the upper control arms on the front of the vehicle. Each sensor is connected to a link rod attached directly to the upper control arm. The sensors produce a voltage that the Airmatic Control Module translates to axle height.
What are the problems with the Mercedes Airmatic?
The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. When the car is parked the airmatic will try to level the car.
How does air suspension work on Mercedes’s class?
Mercedes-Benz with airmatic suspension tries to self-level when parked but they end up completely lowering to the ground. In our case, the S-Class would raise to normal height when the car started. The airmatic suspension would normally work for the rest of the trip.
The rear springs on some AIRMATIC suspensions can be labor-intensive to replace, while others are as easy as replacing a strut. The 2003-’09 E-Class (W211) is known for leaking rear springs. These springs mount to the lower control arm and the sub-frame.