What happens when you drill out a lock?
Lock-drilling is a last-resort approach to gaining entry to locks that cannot be opened by other means. Drilling a lock will destroy the locking plug, but should leave the mechanism in working order.
Can you break a lock with a drill?
You can drill out a master lock, although it won’t work on all of them. Using a drill, and a ΒΌ-inch drill bit, make sure the drill bit goes through the center of the mechanism. That way, it destroys the locking mechanism.
When removing the drill bit from a power drill you should?
Method 2 of 3: To remove the bit, you’ll want to rotate the bit counterclockwise. Pushing the button in on the left side will make the drill rotate counterclockwise, while pushing the button on the right side will cause the drill to turn clockwise.
Do you have to drill a lock to get in?
Lock-drilling is a last-resort approach to gaining entry to locks that cannot be opened by other means. Drilling a lock will destroy the locking plug, but should leave the mechanism in working order. If you must do it, you can learn to examine the lock and approach the task properly, with the right equipment for the job.
Is it possible to drill a pin tumbler lock?
File cabinets generally have two types of locks, pin tumber and waffer. It is not possible to drill a waffer lock as they have no shear line. The keyways on file cabinet pin tumbler locks are very small. As such, if you are going to attempt drilling one, you need a much smaller bit. If you choose the wrong bit size, you may split the cylinder plug.
What should I use to drill out a locked file cabinet?
Whether an inadvertent key loss occurred or a used locked filing cabinet was purchased with no available key, drill out the lock and release it with the proper tools and basic power tool know-how. Insert an appropriately sized steel drill bit into the chuck of an electric drill and tighten securely with a chuck key.
Where is the center punch on a keyhole drill?
Hammer a center punch at a point directly above the keyhole. This will create a guidance point for drilling. The point should be just below the shear line, the dividing line between the inner and outer cylinder of the lock, which will keep the drill bit on the center plug.
Can you drill a lock that won’t open?
Understand the lock well enough to drill it properly. Certain locks are not going to open as easily as others, even with drilling. There is no point in drilling a lock that has anti-drill pins. These type of pins are made out of hardened steel so that they are harder than the drill bit.
How to use a power drill to unlock a lock?
Some locks are easier to drill through than to try and pick, especially if you need to get through them in a hurry! You will need one large power drill and an assortment of drill bits to be able to use this method. First, drill a 1/8 inch pilot hole just above the keyhole. Then follow through with a 1/4 inch or larger drill.
Is there any point in drilling a lock that has anti drill pins?
There is no point in drilling a lock that has anti-drill pins. These type of pins are made out of hardened steel so that they are harder than the drill bit. Something like a euro profile cylinder must also be given special consideration.
How many strikes does it take to drill a lock?
At around 30 seconds, with around 20 strikes (more or less) with a standard bump key, this is a pretty fair indication that this method will be ineffective. With a modified bump key, complete with a filed down shoulder and rubber washers, taking a full minute will have yielded hundreds, or even thousands, of tries.