Can a Mercedes-Benz CL 500 suspension be repaired?
The first issue with repairs is that often it is very difficult to identify which component needs fixing. The error code from your car is a handy first step, but even those might show just one of many issues with the suspension.
When to replace shocks and struts in Mercedes Benz?
You might also notice uneven tire tread. If you see a damaged and oily-looking shock, or if the car can be bounced up and down when someone pushes on one of its corners, you probably need to replace something in your suspension system. Your mechanic should be able to diagnose faulty shocks and struts in your Mercedes.
Where does W215 CL500 ABC hydraulic system come from?
I got an enquiry for the refurbishment of a (2006) W215 CL500 ABC Hydraulic System a couple of months back. All the parts were sourced by the owner directly from Mercedes Benz and I provided the Hydraulic Seal Ring Kit for the job at hand. A date was arranged and the owner drove down 200 miles from Leeds to the workshop in Oxford.
When did the Mercedes CL 500 come out?
Mercedes’ CL 500 was a watershed vehicle for the German automaker. Not only was the car enormously popular in Europe and North America, it helped introduce several of its now-standard technological innovations. The second generation of Mercedes’ CL coupés, introduced in 1999, featured the company’s most advanced active suspension systems to date.
The first issue with repairs is that often it is very difficult to identify which component needs fixing. The error code from your car is a handy first step, but even those might show just one of many issues with the suspension.
What’s the pressure on a Mercedes CL 500?
The pump pushes fluid at a pressure of 2,960 psi (20,400 kPa) through the system. This fluid is regulated by several intermediate computers and a master CPU. The result is a car that stayed absolutely flat through corners and glided over dips and bumps in the road.
What kind of suspension system does Mercedes Benz use?
The second generation of Mercedes’ CL coupés, introduced in 1999, featured the company’s most advanced active suspension systems to date. The Active Body Control system uses four hydraulic suspension rams that use three pressure regulators. These regulators are connected to a combination power steering and suspension pump.
Mercedes’ CL 500 was a watershed vehicle for the German automaker. Not only was the car enormously popular in Europe and North America, it helped introduce several of its now-standard technological innovations. The second generation of Mercedes’ CL coupés, introduced in 1999, featured the company’s most advanced active suspension systems to date.
Can you repair the suspension on a Mercedes Benz?
Repairing the ABC suspension on your vehicle is at best a temporary solution, with more repairs a certain part of the future. While it might seem cheaper now to just replace a sensor or fluid line, chances are things will start to add up quickly. So maybe you’ve fallen in love with the ABC system.
What are the rules for a Mercedes CL500?
With all of that long winded experience, here are the overall rules for keeping an overall happy CL in my experience. 1. Frequent Mobil 1 Synthetic Oil Services. 2. Change Transmission oil at around 75K or 5 years. 3. Always Keep clean air filters. 4. Keep good, mercedes brand belts on the car. 5.
What is the fuse box diagram for a Mercedes CL500?
Here you will find fuse box diagrams of Mercedes-Benz CL500, CL600, CL55, CL63, CL65, S280, S320, S350, S400, S430, S500, S600, S55, S65 (1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006), get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
When did the Mercedes CL Class come out?
The Mercedes-Benz CL-Class was a line of luxury coupés produced by the German automaker Mercedes-Benz, produced from 1992 to 2013. The CL-Class was based on the S-Class full-size luxury sedan.
The pump pushes fluid at a pressure of 2,960 psi (20,400 kPa) through the system. This fluid is regulated by several intermediate computers and a master CPU. The result is a car that stayed absolutely flat through corners and glided over dips and bumps in the road.
How to remove and install front lower control arm?
When you reinstall this bolt make sure to tighten it to 165 Nm. Remove the bolts that attaches the control arm to the subframe / front axle carrier.
How to change the ball joint on the lower control arm?
6) Remove the Lower control arm. 7) Lower the steering knuckle out of the way, then Put the Ball Joint Remover/Installer Tool on the Ball Joint, press the old ball joint out. YOU MUST HAVE THIS TOOL, THIS JOB CANNOT BE DONE WITHOUT IT.
With all of that long winded experience, here are the overall rules for keeping an overall happy CL in my experience. 1. Frequent Mobil 1 Synthetic Oil Services. 2. Change Transmission oil at around 75K or 5 years. 3. Always Keep clean air filters. 4. Keep good, mercedes brand belts on the car. 5.
Are there any problems with the Mercedes CL600?
The m137 v12 in the pre-2004 CL600 has had problems with the cylinder shut off system. Make sure you have it deactivated. Coil packs can be problematic too, but it all seems related to this blasted cylinder shut off system. It is not much more powerful than the V* although the power delivery is much more turbine like.
Are there any problems with the Mercedes CL500?
Keep track that the ABC fluid is good is another important issue with any ABC equipped Benz. These cars are heavy. Your going to burn through front pads and tires every 20,000. But my CL is a pleasure and has been very dependable car overall. My 2000 CL500 just hit 88]
What makes the Mercedes CL 500 suspension work?
The result is a car that stayed absolutely flat through corners and glided over dips and bumps in the road. That is, until the problems began. Like any active suspension, the CL 500’s Active Body Control (ABC) is comprised of a network of moving parts, sensors and computers.
How to troubleshoot Mercedes Benz air suspension problems?
Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.
How often should you change the oil on a Mercedes CL500?
1. Frequent Mobil 1 Synthetic Oil Services. 2. Change Transmission oil at around 75K or 5 years. 3. Always Keep clean air filters. 4. Keep good, mercedes brand belts on the car. 5. Align all 4 wheels immediately after tire replacement. 6. Brake fluid flush every 2 Years. 7. Cabin filters anually. 8. Keep sunroof track lubricated.