How do you remove a Kwikset handle lock?

How do you remove a Kwikset handle lock?

How to Remove a Kwikset Laurel Door Knob

1. Loosen the outer ring.
2. Grab the knob handles on both sides of the door and simultaneously turn both handles clockwise.
3. Loosen both screws on the inside of the knob mechanism.
4. Unscrew the latch from the side of the door.

How do you replace the rear door handle?

Remove the rear window frame (guide) rail bolt. Remove the plastic push pin from the rear of the door panel. Using either a plastic pry bar or a wide-tip screwdriver wrapped in tape (to protect the paint), nudge the bar tip between the panel and the door.

How do you replace a front door lock?

First, remove the door lock actuator assembly from the dock latch. There are three screws and a control lever that must be removed (no photo). The actuator assembly covers are glued together. Use either a small chisel or a wide flat-head screwdriver with a hammer to separate the covers. Remove the exposed motor from the assembly.

Can a door handle be removed without a door latch?

Specifically, you can’t access the rear exterior door handle or door lock actuator without removing the door latch. The door latch blocks access to the door handle’s rear mounting bolt, and since the door lock actuator is mounted and braced to the door latch, you can’t remove the actuator without removing the latch.

How to replace the rear door lock on a Land Rover?

I bought a new lock barrel and fitting it into the handle assembly is as easy as pushing it into place! Its a straight forward job to replace the rear door lock assembly, just undo the 4 bolts/nuts holding the assembly in place and remove.

First, remove the door lock actuator assembly from the dock latch. There are three screws and a control lever that must be removed (no photo). The actuator assembly covers are glued together. Use either a small chisel or a wide flat-head screwdriver with a hammer to separate the covers. Remove the exposed motor from the assembly.

Remove the rear window frame (guide) rail bolt. Remove the plastic push pin from the rear of the door panel. Using either a plastic pry bar or a wide-tip screwdriver wrapped in tape (to protect the paint), nudge the bar tip between the panel and the door.

Specifically, you can’t access the rear exterior door handle or door lock actuator without removing the door latch. The door latch blocks access to the door handle’s rear mounting bolt, and since the door lock actuator is mounted and braced to the door latch, you can’t remove the actuator without removing the latch.

How do you remove a push pin from a door?

Remove the plastic push pin from the rear of the door panel. Using either a plastic pry bar or a wide-tip screwdriver wrapped in tape (to protect the paint), nudge the bar tip between the panel and the door. With some gentle prying action, the plastic fastener pins recessed in the door panel will pop off the door.