What do you need to remove Mercedes W124 cooling fan?
You will need a short 8mm Allen to remove the viscous clutch on the fan. We ended up grinding an 8mm L-shaped Allen to fit in the space. You will also need Mercedes-Benz tool number 104 589 00 01 00 to stop the pulley the clutch is mounted to from spinning so you can remove the clutch.
How many Ford clutch removal tools are left?
Only 16 left in stock – order soon. . Only 1 left in stock (more on the way). . Only 17 left in stock – order soon. . Only 2 left in stock – order soon. . Only 4 left in stock – order soon.
Is there a pulley holder for a fan clutch?
Pulley Holder & Fan Clutch Tool Kit – 3472 . . Only 4 left in stock – order soon. . . . Only 10 left in stock – order soon.
How do you Un tension a Mercedes Benz belt?
At this point you can release the tension on the belt and slip it off of the alternator pulley. Place a 15mm socket over the bolt on the tensioner (red arrow) and turn the socket clockwise. This will un-tension the belt. If you are replacing the belt you will need to follow the steps below.
Can you replace the drive belt on a Mercedes Benz W124?
I recommend you buy two belts and always keep an extra one in the car. You don’t want to be stranded on the side of the road for the lack of a spare drive belt. Replacing the drive belt on the W124 is a very doable DIY; what it is not is as simple as doing it on and old Chevy.
How do you replace a W203 electric fan?
There are two 10mm bolts holding the center bracket to the front of the car from the back of the bracket. Use a small wrench and working from behind the bracket remove these two bolts. Unscrew the two hood stops (one on each side), they simply unscrew and then pull out.
How big of Allen do I need for W124 cooling fan?
Depending on the engine and accessories on your car there can be very, very little room to work between the fan and the radiator. You will need a short 8mm Allen to remove the viscous clutch on the fan. We ended up grinding an 8mm L-shaped Allen to fit in the space.
You will need a short 8mm Allen to remove the viscous clutch on the fan. We ended up grinding an 8mm L-shaped Allen to fit in the space. You will also need Mercedes-Benz tool number 104 589 00 01 00 to stop the pulley the clutch is mounted to from spinning so you can remove the clutch.
How to remove cooling fan from Lenovo ThinkPad T420?
Lift up the keyboard and disconnect the keyboard cable. You can remove the keyboard. Remove three screws securing the palm rest. Pry up and lift the palm rest. Disconnect the touchpad cable from the motherboard. Remove two screws securing the speaker. Remove one screw. Remove the metal plate. Remove four screws securing the heat sink.
Depending on the engine and accessories on your car there can be very, very little room to work between the fan and the radiator. You will need a short 8mm Allen to remove the viscous clutch on the fan. We ended up grinding an 8mm L-shaped Allen to fit in the space.
Lift up the keyboard and disconnect the keyboard cable. You can remove the keyboard. Remove three screws securing the palm rest. Pry up and lift the palm rest. Disconnect the touchpad cable from the motherboard. Remove two screws securing the speaker. Remove one screw. Remove the metal plate. Remove four screws securing the heat sink.