How to remove an instrument cluster from an E class?
Removing the instrument cluster from the E-Class is very easy and only take a few minutes. You will need to have the right set of tools though. There are 4 Torx bolts that you will need to remove and you will need a Set of T6-T25 L-Wrenches. Move the steering wheel as far out and lower it as much as possible.
What causes an instrument cluster to go out?
Jump started car that had died now the cluster is having issues. Improper jumping starting of any Mercedes-Benz car can cause damage to other electronics such as the instrument cluster. Instrument cluster lights for the SPEEDO, CLOCK, RPM are all out? The lights inside the cluster are LED and very unlikely to burn out.
Are there any problems with the W211 instrument cluster?
The instrument cluster on the W211 E-Class, 2003-2009 are known to fail and can exhibit problems such as the cluster lights going out or burned LEDs. Unfortunately, while the cluster can be repaired by an experienced professional most mechanics will not be able to fix the cluster for the E-Class.
Why does my car keep saying AIRMATIC VISIT WORKSHOP?
It could also be that there is a discontinuity problem with any of the air suspensions components. This will difficult to track down without a scanner. If you get the AIRMATIC Visit Workshop message, your car may still drive but do get it checked out as soon as possible.
Where is the Airmatic control module on a Mercedes Benz?
The Airmatic control module is located in the passenger compartment right side footwell. You will need to pull back the carpeting to access it where it is mounted on a plate. You wouldn’t think it, but the instrument cluster plays a vital roll in the Airmatic system.
Why does my Mercedes Benz Airmatic make a hissing noise?
You want to listen closely for a hissing noise after the suspension begins to raise. This is the most common failure on Mercedes-Benz equipped with Airmatic. It’s common for them to leak from the hose connection at the reservoir as well as have a bag rupture from age.
It could also be that there is a discontinuity problem with any of the air suspensions components. This will difficult to track down without a scanner. If you get the AIRMATIC Visit Workshop message, your car may still drive but do get it checked out as soon as possible.
Is the Mercedes-Benz Airmatic ride height sensor failure prone?
The valve blocks in W211/219 are not as failure prone as other Mercedes chassis where the solenoids are integrated such as W220/164. If you remove an airline from the valve block and observe aluminum pitting or oxidation, we would recommend replacement . Failures of the ride height sensors are sporadic.
Removing the instrument cluster from the E-Class is very easy and only take a few minutes. You will need to have the right set of tools though. There are 4 Torx bolts that you will need to remove and you will need a Set of T6-T25 L-Wrenches. Move the steering wheel as far out and lower it as much as possible.
How to remove the instrument cluster on a Mercedes W124?
Removing the instrument cluster on your Mercedes W124 is not a difficult job; you can even do it without removing the steering wheel. The gauge cluster is a friction fit and is pulled from the dash with two cluster removal tools.
The instrument cluster on the W211 E-Class, 2003-2009 are known to fail and can exhibit problems such as the cluster lights going out or burned LEDs. Unfortunately, while the cluster can be repaired by an experienced professional most mechanics will not be able to fix the cluster for the E-Class.
Is the E200 Kompressor a dead instrument panel?
My E200 kompressor did exactly the same thing yesterday, and now has a totally dead instrument panel. I’ve got an auto-electrician chap coming over tonight, and I’m going to test the fuses to make sure it’s not something simple. I see that new instrument clusters are about £280, too.
How much does it cost to fix a Mercedes-Benz instrument cluster?
Unfortunately, while the cluster can be repaired by an experienced professional most mechanics will not be able to fix the cluster for the E-Class. If taken to the Mercedes-Benz dealer a new cluster will be installed which costs between $900-$1200 USD.
What happens when an instrument cluster is replaced?
When a new cluster is installed it will need to SCN coding which the dealer will have to perform or any repair facility that is equipped with Mercedes-Benz MB SD Connect Compact Star Diagnostic Tool. If the cluster is replaced with a used cluster from another Mercedes-Benz, then the miles will not longer show on instrument cluster.
How to change the instrument cluster in a Mercedes Benz?
The Display Unit Speed-/Odometer: function allows you to choose whether certain displays appear in kilometers or miles. The selected unit of measurement for distance applies to: •► Press the button on the steering wheel to select the Settings menu. •► Press the button to select the Instr. cluster submenu.
Where is the battery on an E class?
The main battery of the E-Class is located in the trunk. Make sure you disconnect the battery and have the ignition turned off prior to proceeding with the cluster removal. Grab the frame of the instrument cluster with your finger and pull it out.