What are the fault codes for Mercedes Actros?

2037 Final feedback stage contains a fault. 4041 The divider sensor has a short to ground. 4140 The gearshift sensor has a break. 4241 The sensor of inclusion of routes has a short circuit to ground. 4341 Range switch has short to ground. 4344 A range switch sensor component is outside the permissible range of parameters.

What is the fr and PSM of Mercedes Actros?

FR ( Traffic regulation) & PSM ( Special module with parameterization) DTC of MERCEDES Actros, Atego & Axor DTCO ( Tachograph ), ZHE ( Additional heating) & WS ( Maintenance system) of MERCEDES Actros, Atego & Axor FLA ( Torchlight Device ), FTCO ( Flat Tachograph Control Unit )) DTC of MERCEDES Actros, Atego & Axor

What are the fault codes for Mercedes Benz brake system?

The list of Fault Codes for brake system ( BS) of Mercedes-Benz truck such as: Actros, Atego, Axor 0160 Communication between vehicle CAN data is faulty. 0169 CAN bus signal from the INS control unit. The tool is missing or has a fault. 2112 “Trailer off” output signal incorrectly parameterized. 2203 Overpressure valve has open circuit.

What is DTC for Mercedes Benz Atego and Axor?

FLA ( Torchlight Device ), FTCO ( Flat Tachograph Control Unit )) DTC of MERCEDES Actros, Atego & Axor MERCEDES Actros & Atego Fault Codes DTC. 0160 Communication between the data on the CAN bus of the car has a fault 0162 Speed signal via the CAN bus from the tachograph has a fault

What are the fault codes for Mercedes Benz trucks?

MERCEDES BENZ Actros, Atego, Axor Truck Full Fault Codes DTC – BS (Breaking Control System), NR (Frame Level Adjustment, AG (Automatic gear selection) MERCEDES BENZ Actros, Atego, Axor Truck Full Fault Codes DTC – BS (Breaking Control System), NR (Frame Level Adjustment, AG (Automatic gear selection)

What does Mr 0782 mean on a Mercedes Benz?

MR 0782 – The catalyst is absent. MR 0788 – before the catalyst temperature is too high (the threshold value is exceeded 1). MR 0789 – before the catalyst temperature is too high (the threshold value is exceeded 2). MR 0797 – before the catalyst temperature is too high (reduced engine power).

List of diagnostic trouble codes (DTCs) of the toolbar block (INS) for Mrcedes-Benz Actros, Atego, Axor 0607 Input Terminal W has a short to ground or open circuit. 0902 Cable K has an open or short to positive. The state of the digital input X1.18 / 2 “Differential lock 1. The front axle” unreliable

0117 – Measured WSK torque converter clutch clutch control unit value is invalid. 0119 – measured by the control unit KWS value is invalid. 0180 – ART control unit measured value is invalid. 0201 – Engine CAN to MR control unit in single-wire mode 0202 – CAN message from the MR control unit is missing or incorrect.

What is the speed signal on a Mercedes Benz?

4345 – The speed signal is a circuit break or short circuit to earth or positive. 4440 – The first branch of the gas pedal sensor has a circuit break or short circuit to earth or positive. 4540 – The second branch of the gas pedal sensor has a circuit break or short circuit to earth or positive.

0161 CAN connection has a malfunction open communication on the CAN bus vehicle 0162 Malfunction of communication with the control unit FR (FMR) 0164 Faulty communication with the control unit WSK 0165 Fault RS communication with the control unit (RET) 0166 Faulty communication with the ABS control unit or BS (EPB)

What is the GS code for a Mercedes Benz truck?

GS 3120 block valves (EPS), MUB solenoid valve is open GS 3121 block valves (EPS), the solenoid valve is open MGB 3122 Valve GS (EPS), the solenoid valve MUB is a short to ground 3123 Valve GS (EPS), the solenoid valve MGB has a short to ground

Navigation