Why is my intermittant starting fault A160?

Why is my intermittant starting fault A160?

Starting issues began last year, when the weather cooled, unlocked with the alarm key and got in the car one evening, tried to start and nothing happened?!? ALL electrics working, new battery recently!!, new key fob batteries etc, just nothing on final turn to crank starter.

How big is an al160 profile scooter lift?

The streamlined design of the AL160 Profile Scooter Lift features an open platform design with a simpler, smaller silhouette. Harmar’s AL160 Profile Scooter Lift safely and securely transports power scooters with a wheelbase between 30″ and 42″ – no scooter modifications needed.

What’s the problem with my Mercedes-Benz Y reg A160?

My wifes y reg A160 had the same fault. Today we cannot get it to start at all, tried everything. As usual all lights come on, battery is good, key fobs ok etc. Notice there is a tick sound when key is fully wound. will book in to the garage and update on outcome. I had that kind of problem. Lights were OK, also stereo worked etc.

Starting issues began last year, when the weather cooled, unlocked with the alarm key and got in the car one evening, tried to start and nothing happened?!? ALL electrics working, new battery recently!!, new key fob batteries etc, just nothing on final turn to crank starter.

What to do when your car wont start but the radio and lights work?

If you have a manual car and it won’t turn on, it could be because you don’t have the clutch pressed in far enough. Adjust the clutch to make sure that it is pushed in all the way and try starting the car again. When a car won’t start but the radio and lights still function, it can be frustrating.

Why are my radio and lights not working?

Often, this issue is caused by a dead battery. When a dead battery is the cause of the problem, all accessories in the vehicle, including the radio and lights, won’t work. But when a car owner attempts to turn on the engine and the attempt fails, yet the radio and lights still work, it can lead to confusion.

My wifes y reg A160 had the same fault. Today we cannot get it to start at all, tried everything. As usual all lights come on, battery is good, key fobs ok etc. Notice there is a tick sound when key is fully wound. will book in to the garage and update on outcome. I had that kind of problem. Lights were OK, also stereo worked etc.

If you have a manual car and it won’t turn on, it could be because you don’t have the clutch pressed in far enough. Adjust the clutch to make sure that it is pushed in all the way and try starting the car again. When a car won’t start but the radio and lights still function, it can be frustrating.

Why are the lights on my dash not working?

Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.

Often, this issue is caused by a dead battery. When a dead battery is the cause of the problem, all accessories in the vehicle, including the radio and lights, won’t work. But when a car owner attempts to turn on the engine and the attempt fails, yet the radio and lights still work, it can lead to confusion.

How can you tell when your car won’t start but Lights Come On?

Luckily for all drivers, you can tell when your car has blown a fuse. Detecting a damaged fuse is one of the first steps in figuring out what prevents the engine from starting. Analyzing and diagnosing the broken fuse’s location can help you prevent the “car won’t start but lights on” scenario in your vehicle.

How to fix Bert Rowe’s a class car?

You have lost or a plastic link has become detached from the selector mechanism, see mypage 59 for cheap cure. A Class with ACS transmission Auto Clutch-less system) your cars are also fitted with this link so be aware, Chris however informs that on his ACS he lost 4th gear as well.

Are there any questions about the Mercedes a class W168?

Questions and answers on Mercedes-Benz ‘A’ Class W168, variants, This page contains questions asked by owners and replies given by lofty, although the site does not have a Q & A Forum. In a large number of instances owners have by their own admission saved £s and in some cases 100s & 1000s of £££ by following the advise given.

Where is the OBD2 port in my Mercedes a class-168?

OBD2 port Mercedes A Class – 168 (1997 – 2004) – Find your plug ! Where is my OBD2 port ? All vehicles are equipped with an OBD port to which you can connect your klavkarr diagnostic case.

When did the Mercedes Benz W168 come out?

The Mercedes-Benz W168 A-Class was the first model of the A-class produced between 1997 and 2004. Therefore had a lot of room for improvement. In this article, we will go over the 15 most popular modifications. The standard W168 head unit is very dated, so replacing it should be the first thing on your list of modifications.

Which is the best modification for a Mercedes-Benz W168?

Once installed, they add some much needed brightness to the otherwise drab interior. By far the best modification you can install on the W168 is angle eyes lights. The standard bulbs are nothing more than functional whereas the angel eyes are full of character. What makes this modification so popular is the ease with which you can install them.

Can a Mercedes-Benz W168 head unit be replaced?

The standard W168 head unit is very dated, so replacing it should be the first thing on your list of modifications. For example, the old head unit still comes with a cassette player! Unless you have a soft spot for your old cassettes, you, like me, will be begging for a Bluetooth connection.

Can a roof spoiler be added to a Mercedes W168?

Adding a roof spoiler to your W168 is a great way to toughen up its looks. The W168 has a very passive looking rear profile so the roof spoiler is a welcome upgrade. The spoiler won’t interfere with the visibility or negatively affect you’re the cars performance. In fact, it has been known to improve the overall stability.

Can a Mercedes-Benz intermittant start at all?

Today we cannot get it to start at all, tried everything. As usual all lights come on, battery is good, key fobs ok etc. Notice there is a tick sound when key is fully wound. will book in to the garage and update on outcome. I had that kind of problem. Lights were OK, also stereo worked etc. It just didn’t start when you turned the key.

How do you change the ignition lock on a Mercedes 190E?

Use a 10mm Hex and breaker bar to remove the screw holding the wheel to the shaft (red arrow).Have someone hold the wheel while you break the screw loose, never use the steering lock to hold the wheel in place. In this photo you can see the airbag plug (green arrow) and horn connections (yellow arrows).

Why does my intermittant not start when I turn the key?

It just didn’t start when you turned the key. Only giving the text “Start Error” and sound “tic tic tic” like the starter motor tried but not starting. You can measure the voltage of the battery. Should be 12,7 Volts. I had 12,1 Volts -> I replaced the battery and problem was solved -> Everything works ok.

Can a bad ignition switch cause a car not to start?

However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems.

Why does my car not start when I start it?

Worn ignition switch contacts, temperature problems, or broken springs can all cause the ignition switch to fail, preventing you from starting your car. On the road, poor ignition switch contacts could shut the engine off while driving, which could be dangerous.

What causes a Mercedes Benz to not start?

In most cases you will get a fault code related to one of the following: 1 ECM / PCM computer failure 2 Camshaft position sensor 3 Shifter Selector module 4 Fault codes related to driver authorization or immobilizer 5 Electrical problems

How often should you insert and remove the ignition key?

You may insert and remove the ignition key thousands of times every year, wearing the key and tumblers ever-so-slightly every time. Heavy keychains can add more stress to the ignition cylinder, increasing wear. After a while, the key may fall out of the cylinder or be unable to turn out of the lock position.

When does the motor is cold Cant start?

When motor is cold cant start. I need to turn over for 20-30 turns before it will start. After hard start motor not support 1200rpm. Immediately go to down (800-900) and triet to off. Once started whilst its warm the car starts first time. And car work fine and accelerates are good. My mechanic cant find whare is problem.

When motor is cold cant start. I need to turn over for 20-30 turns before it will start. After hard start motor not support 1200rpm. Immediately go to down (800-900) and triet to off. Once started whilst its warm the car starts first time. And car work fine and accelerates are good. My mechanic cant find whare is problem.

What causes a car to stall on a cold start?

It also manages the idle under changing engine loads, like when you kick on the air conditioning, turn on the headlights, or turn up the radio. When the idle air control valve malfunctions, you may experience a rough idle or the vehicle may stall entirely. This is especially true on cold starts.

What should my Fuell pressure be for a cold start?

1.Diagnostic with MB star diagnosis. (Only lambda sensor appears) 2.All fiters (oil,fuell and air filters) are new. 3.Checked Mass Air Sensor + Throttle. Are work fine and clean. 4.My fuell pressure is 4.2bar.

What causes a car to start at the wrong time?

Spark plug wires are a source of electromagnetic interference (EMF), but this is usually only a problem on some aftermarket setups when this interference isn’t taken into account. A timing belt or chain that has skipped a tooth will throw off the cam timing, causing the intake and/or exhaust valves to open at the wrong time.

Why is my Mercedes Benz battery not working?

If you pressed the unlock button on the door handle the instrument cluster would state “Key not recognized”. The next problem that this car developed was the battery dying when the car was parked for an extended period of time or parked overnight. It was confirmed that no lights were left on.

What should battery voltage be on Mercedes intermittant?

Only giving the text “Start Error” and sound “tic tic tic” like the starter motor tried but not starting. You can measure the voltage of the battery. Should be 12,7 Volts. I had 12,1 Volts -> I replaced the battery and problem was solved -> Everything works ok. A new battery is quite cheap to buy and easy to change…

What to do if your laptop battery does not work?

Try charging your computer with an alternate good known AC adaptor and see if it works. If it does not work, remove the battery for your computer and disconnect all the external peripherals (like printers, scanners, or any USB device) connected to your computer. Press and hold the power button for 10-15 seconds to drain out the residual power.

Why does the battery sensor stop reading the battery?

If the sensor isn’t working properly, you may find that a fully charged and functioning battery won’t power on the laptop or will flash error lights. If this is the case, you don’t necessarily have to run out to buy a new battery if the sensor is just not correctly detecting the battery. Why does the sensor stop reading the battery?

What are the error codes on the Asko washing machine?

Asko Washing Machine Error Codes F1 – Water supply/low water fill F2 – Water level too high F3 – Pump problem F4 – Thermistor problem F5 – Fault in thermal cutout or heating pause fault F6 – Motor fault F7 – Door lock release fault 00 – Machine did not spin Beko Washer Error Codes H1 – NTC Open or Short Circuit H2 – Heater Open Circuit

What does it mean when it says error code 16?

What is Error Code 16? The error message “error code 16 this request was blocked by the security rules” usually occurs while visiting certain websites. The message prevents users from accessing the site which leads to frustration. It usually occurs when the ISP Blocks the site.