How to remove the blower motor from a Mercedes C-class?
How to remove the interior Blower Motor from a Mercedes 2012 C-Class . Gently pull down on the tab on the side of the blower motor. With the tab pulled down turn the motor clockwise and wiggle and pull it down and out of the housing. Here is what removal tools i use :
What are the problems with the Mercedes C class?
The 2011 C-Class has a well-known and highly publicised problem with its steering system. The unresponsiveness and the strange noise are being caused by a problem with your power steering pump and the fluid line. This will usually manifest as a leak.
What makes a Mercedes-Benz C class make a creaking noise?
They are especially known for a loud creaking noise when folding away, but can also have issues with not folding away at all. The creaking noise is caused by a problem with mirror wheels.
Can you feel the vibrations in a Mercedes C class?
You can feel excessive vibrations in the car while you’re driving. The driving seniors in your C-Class are very clever, but they will fail on occasion. If you can feel excessive vibrations while driving, then there’s a good chance that your active driving sensors have failed.
How to remove the interior Blower Motor from a Mercedes 2012 C-Class . Gently pull down on the tab on the side of the blower motor. With the tab pulled down turn the motor clockwise and wiggle and pull it down and out of the housing. Here is what removal tools i use :
Where is the regulator on a Mercedes fan blower?
The Mercedes Benz fan blower motor regulator is a series of resisters in a printed circuit board about 2-inches square located right next to the blower motor.
What to do if your blower motor stops working?
Personally, I replaced mine when it stopped working and that solved the problem. There is a motor and relay below the motor that many folks replace at the same time, since both are known to fail. One form member even has an excellent write up about the replacement, including pics.
What to do if a Mercedes Benz fuse blows?
If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Before changing a fuse: secure the vehicle against rolling away, remove the SmartKey from the ignition lock, and switch off all electrical consumers.
How to fuse a Mercedes Benz C Class W204?
To open: pull out cover (1) slightly at the bottom in the direction of the arrow (3). Do not use a pointed object such as a screwdriver to open the cover in the dashboard. You could damage the dashboard or the cover. Pull cover (1) outwards in the direction of the arrow (2) and remove it. To close: clip in cover (1) on the front of the dashboard.