How do you change the CD on a Mercedes Benz?
This is to adjust the orentation of the CD player from horizontal to vertical or vice versa. Take the large steel casing mount off the CD changer via the 4 phillips screws. Then take off the sticker covering the holes. and just mose the silver spring mount from H to V or anywhere in between (for diagonal mounting). once done reapply sticker.
When did the Mercedes CLK 320 come out?
The CLK 320 Coupé was introduced in the 1997 model year, powered by a 218 PS (160 kW; 215 bhp) 3.2 L V6 engine. This vehicle is produced with both 5-speed manual and automatic transmission style. The CLK 320 Coupe can accelerate from 0-100 km/h in 7.4 seconds. Its top speed is listed as 240 km/h. The CLK 320 Cabriolet was introduced in 1999.
Can a CD changer be removed from the car?
Not all cd changers use a cartridge cd dispenser either. The cd changer unit does need to be removed from the vehicle when doing this repair and it’s also good practice to wear a ground strap so you don’t risk damaging any internal electrical components. This particular tutorial was done on a 1997 BMW 540i.
What causes a CD changer to get dirty?
Over time a cd changer can stick from either sitting or too much usage. The grease goes dry out and becomes dirty which is turn ruins it’s lubricating qualities. Other times the laser can become dirty or the components just wear out all together.
This is to adjust the orentation of the CD player from horizontal to vertical or vice versa. Take the large steel casing mount off the CD changer via the 4 phillips screws. Then take off the sticker covering the holes. and just mose the silver spring mount from H to V or anywhere in between (for diagonal mounting). once done reapply sticker.
Can a Mercedes Benz audio gateway be replaced?
The Audio Gateway is the brains of the Mercedes-Benz COMAND system. You will need to have an authorized Mercedes-Benz service technician replace the whole unit if AGW is defective.
Are there any problems with Mercedes Benz COMAND system?
We have listed down common issues with the Mercedes-Benz COMAND system, including problems with The most common solution to fix any of these issues is to try to perform a soft reset of the COMAND unit.
How to fix a Mercedes Benz navigation system?
Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order. Chances are the symptoms may return. If this happens repeatedly, a professional Mercedes Benz repair technician or mechanic can help check any updates for your COMAND / navigation unit. Find the fuse box under the dashboard.
What to do if your CD player won’t change?
It hangs in the slot all loosey goosey and is why we get the dreaded “Magazine Empty” & “NO CD Changer” errors. Pull both plugs out. This is to adjust the orentation of the CD player from horizontal to vertical or vice versa. Take the large steel casing mount off the CD changer via the 4 phillips screws.
Why does my CD player say magazine empty?
It is the worse designed plug I have ever seen. It hangs in the slot all loosey goosey and is why we get the dreaded “Magazine Empty” & “NO CD Changer” errors. Pull both plugs out. This is to adjust the orentation of the CD player from horizontal to vertical or vice versa.
What are the problems with a Mercedes CD changer?
Mercedes CD Changer Problems 1 CD Changer Failure. If the Mercedes CD changer fails to function, a loose wiring connection may be to blame. 2 Empty Magazine. If the Mercedes CD changer displays a “magazine empty” message while storing one or multiple CDs, the changer may need to be reset. 3 Disc Error.
Why does my CD changer keep saying disc error?
A “disc error” message from the Mercedes CD changer may result from a dirty laser lens in the player. Remove any dust or debris from the laser lens with a CD lens cleaner brush to resolve the disc error problem. How to Reset the Maintenance Light on a How to Remove a Stuck CD in a Jeep How to Reset the Change Oil Light on a
What to do if your CD changer won’t eject?
My CD Changer is jammed and will not eject. A. Before thinking of repair, disconnect the CD changer. Wait several minutes then reconnect. This may act as a “Reset” and bring the CD changer back to life. In some cases, disconnecting one of the battery terminals for several minutes may be easier.