What are the Mercedes OBD-II Diagnostic Trouble Codes?

This is the list of Mercedes specific OBD-II Diagnostic Trouble Codes (DTC’s) that are used by Mercedes to diagnose the vehicle problems. This codes are presented for information only. You can always refer to the list of Standard or generic OBD-II DTC. P1105 Atmospheric pressure sensor Readout too large.

What kind of diagnostic scanner does a Mercedes Benz use?

It will scan and erase codes for the Airbag, Powertrain, Chassis, Body, Engine, Transmission and Information & Communication systems. The Carsoft 7.4 Multiplexer is designed specifically for Mercedes-Benz cars. While it can read and reset all the systems in most Mercedes-Benz models it has limited programming functionality.

Why are Mercedes Benz OBDII readers so important?

Mercedes-Benz OBDII Readers OBD2 Code Tool Scanner. The advancement of technology has enhanced a diligent approach of the technical problems of vehicles. The invention of the OBD Reader has facilitated problems troubleshooting and it’s a great way to save. Simplicity is the word to describe this unit.

How much does a Mercedes Benz OBD II cost?

Price Range: $185-$210 Read & Erase Codes: Yes OBD II CAN Works with: Mercedes-Benz Only Details: READ and ERASE FAULT CODES -Engine ECU –

Is there an OBD-2 scanner for Mercedes Benz?

You can NOT diagnose them with a simple OBD-2 scanner. To read these systems and their fault codes or erase them from your Mercedes-Benz you need more advanced OBD-II scanners. Top 3 OBD-2 code readers for Mercedes-Benz have been listed under the green column below. 1. OBD II Code Reading Scanners – For ECU Only 2.

Which is the best diagnostic tool for Mercedes Benz?

Because of its small size and wireless transmission, this Mercedes code reader is perfect for collecting live data. Leave it plugged in your Benz as you drive and it will transmit live readings to your smartphone. You can then use the info to examine your car’s real-time health and performance. Emission readiness and Mode 6.

Where can I find the Mercedes Fault code?

Any of the scanners listed above can read and clear the Check Engine / Service Engine Fault Codes. The codes above are retrieved by plugging a diagnostic scanner into the OBD-II port located under the dash, and scanning for fault codes. Location of OBD II port used to retrieve Mercedes-Benz fault codes.

Can a MB v2.0 be used on an OBD1 Benz?

While it’s made for OBD2 Benzes, the MB V2.0 also works on some OBD1 models. Specifically, you can use it on any Mercedes with chassis 201, 126, 124 and 107. You will, however, need to buy the 38-pin iCarsoft conversion adapter for an OBD1 Benz. All systems diagnostics.

Are there any problems with the Mercedes P2000?

P2000 Component N15/3 (ETC control module) is faulty. P2000 Component N15/3 (ETC control module) is faulty. P2000 N3/9 (controller CDI) hardware identification error. P2000 N3/9 (controller CDI) software ‘integration check’ error.

Can you read the fault code on a Mercedes Benz?

Can read fault codes from multiple systems such as transmission, engine, ETS, airbag and more. Can clear fault codes. Can read and erase all fault codes on Mercedes-Benz cars. Only works on MB but can perform further troubleshooting including SBC brake systems, convertible systems, Air Conditioner (A/C) system. 3. Mercedes-Benz Star Diagnostic DAS

Is there a diagnostic scanner for Mercedes Benz?

Mercedes-Benz Star Diagnostic DAS This is diagnostic scanner used at Mercedes-Benz dealerships. Yes, it can do anything including programming of sensors and features. Any of the scanners listed above can read and clear the Check Engine / Service Engine Fault Codes.

What is the Mercedes P2004 check engine code?

Check Engine Mercedes P2004 Code A common failure point for Mercedes-Benz cars equipped with the M272 (350) and M273 (550) engines is the intake manifold air flap lever. When this component fails your Mercedes-Benz will turn on the check engine light triggering any the following codes: P2004 – Intake Manifold Runner Control Stuck Open Bank 1

What is the fault code for Mercedes W203 M271?

Hi I have a P201C fault code:P201C Selfadaptation of mixture formation, The mixture is too rich in the part load range [P0172] What is the cause of this error. Please log in or register to add a comment.

Which is faulty P2002 or P2004 control module?

P2002 Component N15/3 (ETC control module) is faulty. P2003 Component N15/3 (ETC control module) is faulty. P2004 check external voltage supply.Control of holding relay K40/7km (relay CDI) cutoff too early. P2004 check external voltage supply.Relay (diesel engine voltage supply relay) cutoff too late.

What is the fault code for Mercedes Benz?

P1520 S40/4 (CC switch with variable speed limiter) DTR operating unit has contact short (two contacts simultaneously). P1520 S40/4 (CC switch with variable speed limiter) No check contact. P1520 S40/4 (CC switch with variable speed limiter) Operating parts signals through CAN are implausible.

What are the fault codes for a Mercedes Benz?

P0216 Injection Timing Control Circuit Malfunction P0217 Engine Overtemp Condition P0218 Transmission Over Temperature Condition P0219 Engine Overspeed Condition P0220 Throttle/Petal Position Sensor/Switch B Circuit Malfunction

Is there a problem with the Mercedes p200a air flow sensor?

No problems driving, just at stop lights etc. P200A? – something to do with hot film mass air flow sensor? P2029? – format self adaptation? Can anybody advise what course of action to take? Welcome! On the basis of what you have said, it sounds like the Air Mass sensor is suspect. Try Eurocarparts for a replacement, or a dealer.

What’s the problem with my Mercedes-Benz p2029?

Colin is contending that the pipe [sic] under the air filter box is causing the symptoms that you are experiencing on your car. He doubts very much indeed whether it is that MAF that is at fault. FML, I understand now.

When to use a p205a temperature sensor code?

If the PCM detects a degree of voltage in the reductant tank temperature sensor circuit that is not within acceptable parameters, a code P205A will be stored and a malfunction indicator lamp (MIL) may be illuminated. Multiple ignition cycles – with a failure – may be required for MIL illumination.

What are all the codes on a Mercedes Benz?

Use an advanced OBD-II code reader to read and erase Engine CEL, Transmission, ETS, ABS, Airbag and other systems. There are also codes for other control units such as transmission, ABS, SRS, ESP, 4ETS, airbag, A/C. Mercedes-Benz can have up to 47 control units. You can NOT diagnose them with a simple OBD-2 scanner.

Can you erase a fault code on a Mercedes Benz?

Can clear fault codes. Can read and erase all fault codes on Mercedes-Benz cars. Only works on MB but can perform further troubleshooting including SBC brake systems, convertible systems, Air Conditioner (A/C) system. 3. Mercedes-Benz Star Diagnostic DAS This is diagnostic scanner used at Mercedes-Benz dealerships.

Navigation