How much does a Mercedes C280 crankshaft sensor replacement cost?

Mercedes-Benz C280 Crankshaft Position Sensor Replacement at your home or office. Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Mercedes-Benz C280 Crankshaft Position Sensor Replacement costs $308 on average.

Where does the Mercedes Benz crankshaft position sensor come from?

I pulled out the crankshaft position sensor and showed them the original equipment part number of 0261210170 was manufactured by Bosch. This long time German parts supplier still makes a lot of electrical components for Mercedes-Benz automobiles.

What happens if the crankshaft sensor does not work?

If the crankshaft position sensor fails, it will not send information about the position of the crankshaft and speed of the engine RPMs to the ECU. As a result, the ECU doesn’t know when to send the spark plugs and how to adjust the fuel mixture. This can cause your car to stall or hesitate to start.

What happens if the crank on a Mercedes Benz goes bad?

Symptoms of a defective crankshaft position sensor on a Mercedes-Benz. Failed crankshaft position sensor can also impact the idling, the acceleration, or even your transmission shifting. In some cases, it can cause your transmission to go into limp mode. You may also notice an increase in engine vibrations.

Is the Mercedes-Benz crankshaft position sensor problem?

So you can start digging using that info and see what you think. Lots of cars including the Mercedes-Benz are known for having crankshaft position sensor problems. However, when failure of this component becomes suspected an automotive scan tool that reads the data stream is the easiest way to uncover the issue.

What are the symptoms of a failed crankshaft sensor?

Other symptoms of a failed crankshaft position sensor are poor acceleration, engine vibrations, poor throttle response, bad fuel economy, hesitation, engine stalls. The engine starts if you let it cool down. If you are stuck on a parking lot and the car will not start, let the car cool down at least 30 minutes and then try again.

How much does it cost to replace the crankshaft position sensor?

Crankshaft Position Sensor Replacement Cost? While the prices vary based on your location the average cost of replacing the crankshaft position sensor at an auto mechanic or the Mercedes-Benz dealership vary between $250 and $400. The crankshaft position sensor cost between $100 and $150 at the dealership, that’s for the parts only.

Where is the crankshaft position sensor on a Mercedes Benz?

Locate the crankshaft position sensor (CPS) on driver’s side, towards the rear of engine. Back of engine, near the firewall. This opens in a new window. Unplug the electrical connector from the CPS sensor. Squeeze the connector and pull it away from the CPS sensor. This opens in a new window. Remove bolt. Remove the crankshaft position sensor.

How to change the crankshaft position on a Mercedes Benz?

Unplug the electrical connector from the CPS sensor. Squeeze the connector and pull it away from the CPS sensor. This opens in a new window. Remove bolt. Remove the crankshaft position sensor. You will have either an E8 or E10 bolt that holds the CPS sensor in place.

What do you use to loosen a Mercedes crankshaft pulley?

You will need to use Mercedes harmonic balancer tool to hold the crankshaft pulley in place as you loosen up the 27 mm bolt. You will use the harmonic balancer tool to keep the crankshaft from turning. Next, use a 27 mm socket on the bolt to loosen it up.

Why is my Mercedes C280 not cranking up?

If all fuses and realys are ok then the only other possibility would be the ignition switch or the immobiliser cutting out power to the starter. Check if you have power on the ignition when turing over to start. 6 people found this helpful.

Where was the first Mercedes Benz C class made?

The C-Class built at Mercedes-Benz factories in Sindelfingen and Bremen, Germany as well as numerous satellite factories in other countries. The first C-Class (W202) sedan was produced on 1 June 1993 and the first second generation (W203) rolled off the assembly line on 18 July 2000.

What kind of engine does a Mercedes C class have?

The sedan debuted with a range of inline-four and V6 petrol engines and inline-four and -five diesels, later W203’s received the V6 diesel. Most of the engines were carried over from the W202, but the C320 was exclusive, offering 160 kW (215 hp; 218 PS). The diesels now featured common rail direct fuel injection and variable geometry turbochargers.

When did Mercedes Benz C class get a facelift?

The C-Class received a facelift in 2011 for the 2012 model year including new LED taillights, a revised dashboard and instrument cluster layout, and a revised front fascia and headlights. The W204 platform continued into 2015 with the C-Class coupe. The current generation W205 C-Class was launched at the 2014 North American International Auto Show.

Why is my 1994 Mercedes C280 not cranking?

PRKID2012 said he jumped the solenoid and it still didn’t crank. By the way the K40/4 relay in your picture wasn’t used until 96 or 97. And DAS (drive authorization system) wasn’t on 202 C class in 94. A common problem on those 202’s was the terminal 30 connector from the battery to the starter.

Where is the terminal 30 on a Mercedes C280?

A common problem on those 202’s was the terminal 30 connector from the battery to the starter. You’ll find it on the lower firewall on the driver’s side (close to the starter). It’s the terminal where the large battery cable passes from the passenger compartment to the engine compartment.

Why is the solenoid not working on my Mercedes C280?

The immobiliser coil is in the ignition switch and it recognises the signal your key transmits. If the immobiliser had blocked the starter you will not get power to the solenoid.

How do you replace the camshaft sensor on a Mercedes?

Visit the link below to check current prices. Follow these steps to replace the camshaft position sensor on your Mercedes-Benz E, C, S, CLK, ML Class and other models. Open the hood and locate the camshaft position / hall sensor. Unplug the electrical connector from the camshaft position sensor. Remove the bolt using E-8 Female Torx socket.

Where is the crankshaft position sensor located on a Mercedes Benz?

If the crankshaft position sensor is not operating properly, your car will run very erratically or perhaps not at all. Replacement of the sensor is not as easy as the camshaft sensor, unfortunately. The crankshaft sensor is located on the rear of the engine up against the firewall on the bell housing.

Where is the camshaft position sensor on Mercedes?

Camshaft position sensor on Mercedes-Benz cars with 6, 8 and 12 cylinder engines is located on the front of the engine toward the top, near the valve cover.

What happens when the camshaft sensor fails on a Mercedes?

Once the camshaft position sensor fails on your Mercedes-Benz, you may start noticing any of the following: car will hesitate to start, engine cranks but it does not start or starts after several tries, engine runs rough, engine multiple cylinder misfire and lack of power or acceleration.

Navigation