Where is the parking brake assembly located on a car?
The assembly is held by 3 bolts, the middle of which can been seen and accessed only by pushing the parking brake pedal down to the floor. Otherwise it is sitting behind a metal piece attached to the pedal’s lever arm.
How do you remove the parking brake from a car?
1) Pull down and release the parking brake. 2) Remove the two mounting bolts and remove the brake caliper assembly. 3) Suspend the brake caliper assembly so that the hose is not stretched. 4) Remove the disc rotor.
What are the parts of a disc brake system?
Now let’s put the parts together to see how disc brakes work as a whole. This diagram shows the basic parts that make up a disc brake system. 1 … Cite This!
How do you adjust the parking brake lever?
LEVER STROKE 1) Remove the console box lid. 2) Forcibly pull the parking brake lever 3 to 5 times. 3) Adjust the parking brake lever by turning adjust- er until parking brake lever stroke is set at 7 to 8 notches with operating force of 196 N (20 kgf, 44 lb). 4) Tighten the lock nut. 5) Install the console box lid.
Is the parking brake part of the braking system?
Average rating from 123,882 customers who received a Parking brake won’t engage Inspection. A parking brake (also known as an emergency brake) is part of the vehicle’s braking system. You will see a lever inside the car, often by the center console, which may be engaged when needed.
LEVER STROKE 1) Remove the console box lid. 2) Forcibly pull the parking brake lever 3 to 5 times. 3) Adjust the parking brake lever by turning adjust- er until parking brake lever stroke is set at 7 to 8 notches with operating force of 196 N (20 kgf, 44 lb). 4) Tighten the lock nut. 5) Install the console box lid.
How do you remove a parking brake drum?
The parking brake drum, which is part of the brake rotor, must first be removed. There are some springs that keep tension on the shoes that need to be removed using a needle-nose pliers, or a special drum brake tool. Once the parking brake shoes are free, the cable spring is compressed to remove the cable from the shoe.
How does the pawl work on the parking brake?
The pawl stays in place until the gear shift is moved out of the Park position. The problem with relying on this mechanism for the vehicle is that it puts stress on the transmission constantly, which can result in eventual failure. Manufacturers recommend engaging the parking pawl after using the parking brake.