How to replace front shock absorber on 1998 ml W163?
Step by step instructions on how to replace the front shock absorber on a 1998-2005 ML W163. Remove the wheel. Remove the fender liner. Another alternative is to open the hood and access the bolt from the top. To do this you will have to remove the intake air filter. You don’t need to raise the car.
How to remove and install front shock absorber?
Remove the nut at the top. You will need to counter hold the shaft of the shock. Remove the bolt that holds the shock absorber to the lower transverse control arm. Remove the old shock and install the new one in reverse order. See how easy that was! Note: The passenger side shock you can replace easily by removing the intake air filter.
Can a shocks be replaced on the driver side?
The driver side can be replaced by accessing it from the engine bay as well without having to remove the wheel fender liner. There is less space to access the nut at the top of the shock for the driver side but it can be done. Make sure to keep the car with the wheel on the ground when you replace your shocks.
Step by step instructions on how to replace the front shock absorber on a 1998-2005 ML W163. Remove the wheel. Remove the fender liner. Another alternative is to open the hood and access the bolt from the top. To do this you will have to remove the intake air filter. You don’t need to raise the car.
Remove the nut at the top. You will need to counter hold the shaft of the shock. Remove the bolt that holds the shock absorber to the lower transverse control arm. Remove the old shock and install the new one in reverse order. See how easy that was! Note: The passenger side shock you can replace easily by removing the intake air filter.
The driver side can be replaced by accessing it from the engine bay as well without having to remove the wheel fender liner. There is less space to access the nut at the top of the shock for the driver side but it can be done. Make sure to keep the car with the wheel on the ground when you replace your shocks.
What can I do about my Mercedes ml500?
The Mercedes Benz ML500 surges and misfires. How can I fix this? The engine would start and speed up just fine. As it runs at constant speed, the engine would pick up speed slightly. It would miss and buck. What could be wrong with the engine?
Can you use OAT coolant on a Mercedes ml500?
Although this type of coolant may be used as an alternative in case the vehicle isn’t compatible with OAT coolant, you should still consult the owner’s manual and check the labels to see if this meets the vehicle’s requirements. The Mercedes Benz ML500 surges and misfires. How can I fix this? The engine would start and speed up just fine.
What kind of suspension does the ML 163 have?
The ML 163 chassis uses 4 wheels independent suspension. In the rear axle suspension, you will find coil springs that support the back of the car. The ML has struts in the rear.
Where are the coil springs on the ML 163?
The ML 163 chassis uses 4 wheels independent suspension. In the rear axle suspension, you will find coil springs that support the back of the car. The ML has struts in the rear. Inside each of the coil spring, you will find the shock absorber inside each spring.
Where are the struts on a Pontiac ml?
The ML has struts in the rear. Inside each of the coil spring, you will find the shock absorber inside each spring. Rear strut and coil assembly For ML320 1999 – 2003; ML350 2003 – 2005; ML430 1999 – 2001; ML55 ML500 2002-2005 Step by Step Instruction with Pictures. Loosen the lug nuts. Raise the car up.
Where can I buy Mercedes Benz suspension parts?
Find the best OEM Mercedes suspension parts here on our site. Description: Rear. Front. Without active body control.
What are the different types of Mercedes shocks?
Without active body control. Positions: Left Outer, Left Front, Left Lower, Left Rear, Left Upper, Left Inner, Right Outer, Right Front, Right Lower, Right Rear, Right Upper, Right Inner, Outer, Outer Front, Outer Lower, Outer Rear, Outer Upper, Outer Inner, Lower Outer Outer,…
How big is the bolt for the front shock absorber?
Torque Specifications Bolt connecting front shock absorber to the lower control arm: 130 Nm Bolt at the top of the shock absorber, aka self locking nut, connecting to SUV frame: 30 Nm
Find the best OEM Mercedes suspension parts here on our site. Description: Rear. Front. Without active body control.
Without active body control. Positions: Left Outer, Left Front, Left Lower, Left Rear, Left Upper, Left Inner, Right Outer, Right Front, Right Lower, Right Rear, Right Upper, Right Inner, Outer, Outer Front, Outer Lower, Outer Rear, Outer Upper, Outer Inner, Lower Outer Outer,…
Torque Specifications Bolt connecting front shock absorber to the lower control arm: 130 Nm Bolt at the top of the shock absorber, aka self locking nut, connecting to SUV frame: 30 Nm