What does ABC light mean on a mercedes?
Active Body Control System
The ABC or Active Body Control System is a type of suspension meant to help control your vehicle’s movements to stabilize it through risky maneuvers like taking sharp turns or braking quickly and is sometimes recognized as the “Drive Carefully” light on your Mercedes dash.
Why is my brake light not working on my Mercedes?
Yes it could be the brake light switch. It could be other problems such as low brake fluid level or failed ABS wheel speed sensor. There is no certain way to know without first doing some troubleshooting. Where is the brake light swtich located on a Mercedes-Benz? Right above the brake pedal.
Where is the brake light switch on a Mercedes W210?
In the older W210 E-Class, it is located in the back on the back of the pedal. You may need to lay on your back to access the switch. To remove the switch, press on the locking tab and then rotate it clockwise. Step 4. Install new switch Once you remove the old brake light switch, unplug the electrical wires from it.
How to install brake light switch on Mercedes Benz E-class?
Plug the wires in the new switch and install the new switch by twisting it counter-clockwise. Watch the following video on how to install brake stop light switch on an Mercedes-Benz E-Class . I replaced the brake light switch but the lights are still on.
What happens when you fail a brake light switch?
A failed brake stop light switch may trigger the ABS, ESP, ETS warning lights on your dash, through your transmission into limp mode or now allow you to get the car out of park. Common symptoms of a defective brake light switch. Car stuck in Park. ABS ESP ETS lights come on. Can not move the shifter from Park to Drive. Car won’t shift gears.
What to do if Mercedes Benz ABC system is not working?
Take the car to the dealer or a workshop with a Mercedes STAR diagnostic system (SDS). If the problem is not leak related, then you will need the diagnostic codes to determine what component is having the problem. “Drive Carefully” or “Visit Workshop” comes on the dash and stays.
When did the ABC system start on my Mercedes SL500?
In July of 2014, I purchased a used 2003 Mercedes SL500 with 80,000 miles on it. And within days the infamous “ABC Drive Carefully” message started appearing on the dash.
Where is the pulsation dampener on a Mercedes Benz?
The ABC component most likely to cause this noise is the pulsation dampener. The location varies by model and year. On the R230 it is located in the front-left wheel well. On the W215 it is attached to the undercarriage near the transmission. On later models with the updated ABC system (2007+), the pulsation dampener is on the ABC pump.
Where is the ABC pump on a Mercedes Benz?
On the R230 it is located in the front-left wheel well. On the W215 it is attached to the undercarriage near the transmission. On later models with the updated ABC system (2007+), the pulsation dampener is on the ABC pump. Replace the dampener. Cost is around $175 and is a relatively simple DIY project. Or around $600-800 if you have a shop do it.