Why is my Remote key not working on my Mercedes?

Why is my Remote key not working on my Mercedes?

So the problem does not seem to be with the batteries or the battery holder but with the rest of the key. But after switching the battery holders between the 2 keys a few times, now both remotes work and light up strong. So there may be an intermittent contact issue. Anyway both keys are working at this time. I hope they stay working.

How do you program a Mercedes fob remote?

There are a few cases when you need to program your key fob remote to your Mercedes-Benz. Below you will find general instructions on how to synchronize a Mercedes key fob. For model specific instruction check your owner’s manual. Insert the key into the ignition. Quickly remove key from ignition and within 10 seconds hold down the lock button.

What should I do if my Mercedes FOB is not working?

If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light.

Why is my W203 C32 not opening the car?

I’ve got a problem with my W203 C32. Both my fobs fail to unlock the car. Changed the batteries in 1 fob and it still doesn’t work. I can open the car with the key (alarm sounds). Once the key is in the ignitiion the alarm stops. Then it’s possible to lock and unlock the car with the fob.

There are a few cases when you need to program your key fob remote to your Mercedes-Benz. Below you will find general instructions on how to synchronize a Mercedes key fob. For model specific instruction check your owner’s manual. Insert the key into the ignition. Quickly remove key from ignition and within 10 seconds hold down the lock button.

If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light.

How do you unlock a Mercedes with a keyless remote?

Step 1 Place your key in the car’s ignition and turn the key two clicks to the “On” position for any Mercedes car. Press and release the lock button on your Mercedes keyless remote. Press and hold the unlock button on your remote.

How can I tell if my Mercedes remote is working?

Next, we need to check if the remote is sending out a message. The remote emits infrared waves. While you can’t see infrared light with your eyes, there is an easy way to check. Grab your phone and turn on the camera. Point the camera to your phone and carefully see if you notice a light every time you turn you press a button on the remote.

What to do if your Mercedes Benz FOB is not working?

Next, try taking the emergency metal key out of the fob and using it to manually unlock the car’s doors. Then check the fuses for the central locking circuit (controls the vacuum operated door locking mechanism, which uses pressure to lock all the doors at the same time), antenna module, and AAM.

Why is the panic button on my Mercedes not working?

The panic button and/or trunk unlock features don’t work. Your problem is likely that the fob can start the car but will not allow you to unlock the vehicle’s doors or trunk. In other words, it will not allow you to use the fob as a keyless entry remote. Here are some common reasons for this issue: 1. The key is defective.

So the problem does not seem to be with the batteries or the battery holder but with the rest of the key. But after switching the battery holders between the 2 keys a few times, now both remotes work and light up strong. So there may be an intermittent contact issue. Anyway both keys are working at this time. I hope they stay working.

Next, try taking the emergency metal key out of the fob and using it to manually unlock the car’s doors. Then check the fuses for the central locking circuit (controls the vacuum operated door locking mechanism, which uses pressure to lock all the doors at the same time), antenna module, and AAM.

The panic button and/or trunk unlock features don’t work. Your problem is likely that the fob can start the car but will not allow you to unlock the vehicle’s doors or trunk. In other words, it will not allow you to use the fob as a keyless entry remote. Here are some common reasons for this issue: 1. The key is defective.

How do you sync the remote on a Mercedes?

Instructions on how to sync Mercedes remote: Insert the key into the ignition. Quickly remove key from ignition and within 10 seconds hold down the lock button. Continue holding the lock button, and at the same time press, the unlock button five times. Next release all buttons and press the gate/trunk button one time.

Why does my Remote key not unlock the door?

When the physical key can lock or unlock the door, be sure that the mechanism of the locks is fine. There could be an electrical issue that prevents the fob from connecting to the door’s receiver sensor. These are mostly the reasons and troubleshooting options when a remote key won’t unlock car door.

Instructions on how to sync Mercedes remote: Insert the key into the ignition. Quickly remove key from ignition and within 10 seconds hold down the lock button. Continue holding the lock button, and at the same time press, the unlock button five times. Next release all buttons and press the gate/trunk button one time.

What should I do if my Mercedes key fob is not working?

If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light. The light should light up every time you press any of the buttons (Lock, Unlock, Panic, Trunk).

When the physical key can lock or unlock the door, be sure that the mechanism of the locks is fine. There could be an electrical issue that prevents the fob from connecting to the door’s receiver sensor. These are mostly the reasons and troubleshooting options when a remote key won’t unlock car door.

When does the car alarm go off on a Mercedes?

Mercedes alarm may go off even when no one is trying to steal the car. We have seen many cases when a Mercedes alarm (siren) goes off during the night while the car is parked, when you try to lock the car or during extremely cold weather. This past week we worked on a Mercedes-Benz where the alarm would go off randomly in the middle of the night.

Why is my Remote key not unlocking my car?

Anyway it is working fine now. If the red light on the key fob comes on when you press the lock/unlock button then the battery is fine. The key has two components to it. A radio frequency component that operates the locking/unlocking of the car and an infrared component that starts the car.

Why does my Mercedes-Benz R170 alarm keep going off?

My R170 1999 went craisy and the alarm went of time after time, often at night in the summerhouse (the things you do to entertain your neighbours). After searching the net and this fine site i found out that if could be the K40 relay module.

Anyway it is working fine now. If the red light on the key fob comes on when you press the lock/unlock button then the battery is fine. The key has two components to it. A radio frequency component that operates the locking/unlocking of the car and an infrared component that starts the car.

How to replace my keyless entry remote fob?

Simply Select Your Vehicle’s Year, Make & Model Below to Find Your Product! REPLACEMENT KEYLESS REMOTES AND KEY FOBS FOR MOST CAR & TRUCK MAKES. Welcome to Replace My Keyless Entry Remote Fob! You’ve come to the right place for your replacement or backup OEM factory keyless entry remotes, car keys, remote head keys and key fobs.

Why does the remote key not unlock the door?

the Rf both open the doors. Thus the Ir receiver in the door handle. If you clean the battery contacts make sure not to touch them or the battery contact points with bare hands. Also you might try inserting the key in the ignition and let it sit there for a bit to resynchronize the unlock/lock function per factory protocol.

How can I tell if my key fob remote is bad?

When you press the button on your key you should see a small RED led light. The light should light up every time you press any of the buttons (Lock, Unlock, Panic, Trunk). Does the red LED light turn on? If the light doesn’t turn on, then you have a bad key fob remote.