How much does an oil change cost for Mercedes-Benz?
You can see that a Mercedes-Benz oil change costs a fair amount, whether you get one through a service at a dealer or on your own….General Mercedes-Benz Maintenance Cost.
| Maintenance Item | Cost |
|---|---|
| Service B | $595 to $933 |
| Oil change | $154 to $185 |
| Tire rotation | $79 to $100 |
What is the oil level sensor on a Mercedes Benz?
Below you will find step by step instructions with pictures on how to remove and install a new engine oil sensor on a Mercedes Benz engine. Part numbers related to the oil level sensor are shown below and there could be more. The purpose of the the oil level sensor (B40) is to measure the oil level but also oil temperature and the oil quality.
How do you remove the oil level sensor?
Unplug the connector to the B40 Oil Level Sensor. You will have to press the small tab on the connector and pull it out. Remove the bolts that hold the sensor in place using E-10 socket. Pull the oil level sensor down carefully.
How to change oil level in Mercedes Benz?
Use 13mm socket and remove the drain plug and crush washer (red arrow).This bolt does not need a lot of toque but for some reason people really tend to over tighten the drain plug.Use care,as oil should be quite warm. The flow of the oil will change as it starts to empty so don’t just put your drain pan underneath and walk away.
Where is the oil level sensor on a Honda Accord?
Locate the oil level sensor (B40 Oil Level, Engine Oil Tempearture and Quality Sensor) which is shown in the picture below. Unplug the connector to the B40 Oil Level Sensor. You will have to press the small tab on the connector and pull it out. Remove the bolts that hold the sensor in place using E-10 socket.
Below you will find step by step instructions with pictures on how to remove and install a new engine oil sensor on a Mercedes Benz engine. Part numbers related to the oil level sensor are shown below and there could be more. The purpose of the the oil level sensor (B40) is to measure the oil level but also oil temperature and the oil quality.
Unplug the connector to the B40 Oil Level Sensor. You will have to press the small tab on the connector and pull it out. Remove the bolts that hold the sensor in place using E-10 socket. Pull the oil level sensor down carefully.
Use 13mm socket and remove the drain plug and crush washer (red arrow).This bolt does not need a lot of toque but for some reason people really tend to over tighten the drain plug.Use care,as oil should be quite warm. The flow of the oil will change as it starts to empty so don’t just put your drain pan underneath and walk away.
Locate the oil level sensor (B40 Oil Level, Engine Oil Tempearture and Quality Sensor) which is shown in the picture below. Unplug the connector to the B40 Oil Level Sensor. You will have to press the small tab on the connector and pull it out. Remove the bolts that hold the sensor in place using E-10 socket.