When does a blower motor resistor need to be replaced?
If the resistance is out of specs, the resistor must be replaced. For example, in this photo we measured the resistance of this blower motor resistor. According to the service manual, it must be around 4-5 ohms. In our case the ohmmeter shows open circuit, which means the resistor has failed.
Why is the resistor on my Ford Escape not working?
For example, as you can see in this photo, the blower motor resistor in this Ford Escape has failed due to corrosion. If the resistor shows no visual damage, the resistance between terminals must be checked and compared to specifications. If the resistance is out of specs, the resistor must be replaced.
How to test Honda Accord blower motor resistor?
Testing Honda power transistor (blower motor control module). For example, in the 2009 Honda Accord, the service manual describes the procedure as follows: Turn the ignition to ON. Press and hold the OFF button and within 10 seconds press and release the Window Defogger button five times.
What happens if your ballast resistor is not working?
If this happens, the professionals at YourMechanic will be able to measure the voltage coming from the ballast resistor and determine if you need a replacement. Once they read the voltage, they will let you know what condition your ballast resistor is in. If the ballast resistor is not working properly, the vehicle will not start.
What are the symptoms of a bad heater motor resistor?
Symptoms of a Bad or Failing Heater Blower Motor Resistor. 1 1. Blower motor stuck on one speed. A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower 2 2. Blower motor does not work on certain settings. 3 3. No air from the vehicle’s vents.
What does the resistor on a heater do?
It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor.
What does the blower motor resistor do in a car?
The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor.
What are the symptoms of a worn out blower motor?
One of the symptoms of a worn out blower motor is that it can intermittently produce a loud screeching noise when running. How to test a blower motor? If the blower motor doesn’t work at all, the blower motor itself must be tested first. Typically it’s done by measuring the voltage at the blower motor connector when it’s turned on.
How is the speed of the blower motor controlled?
The electronic module that controls the speed of the blower motor is called a blower motor control module. In some cars, the blower motor has only 4 or 5 fixed speeds. In this case, the speed of the blower motor is controlled by a blower motor resistor.
How much does it cost to replace a blower motor?
See: how to check a fuse in a car. If a blower motor is bad, it will need to be replaced. The blower motor replacement costs from $320 to $650, depending on the car. In many cars it’s fairly easy; the blower motor is located behind the glove box and held by 3-4 screws.
Why does my GM blower motor resistor keep failing?
In some cases, the heat is so high that it melts the connector. This is common on late model GM vehicles. If you discover a melted connector, do NOT attempt repair. Purchase an upgraded pigtail and splice it into the harness along with a new blower motor resistor.
Symptoms of a Bad or Failing Heater Blower Motor Resistor. 1 1. Blower motor stuck on one speed. A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower 2 2. Blower motor does not work on certain settings. 3 3. No air from the vehicle’s vents.
If the resistance is out of specs, the resistor must be replaced. For example, in this photo we measured the resistance of this blower motor resistor. According to the service manual, it must be around 4-5 ohms. In our case the ohmmeter shows open circuit, which means the resistor has failed.
Can a broken motor switch stop a blower?
A broken blower motor switch can also stop the blower from changing to certain speed settings. If your blower motor cannot change to certain speeds, check both the resistor and the switch on your dashboard. The most common failure points are the resistor and the motor itself.
What to do if your blower resistor Burns?
Look for obvious signs of corrosion and burns from overheating. If you see signs of overheated connectors, replace the blower resistor and its connector, but again, you must splice the wires right, or you’ll have problems at the splice later on.