How do you remove a secondary fuel filter?
Place the filter wrench over the primary fuel filter. Turn it counterclockwise until the filter is loose enough to continue by hand. Remove the filter and place in a bucket. Using the same steps, proceed to remove the secondary fuel filter. Place the secondary fuel filter in the bucket.
How does a series 60 fuel filter work?
Depending on what model the Series 60 is, there will either be two spin-on fuel filters (primary and secondary) or one spin-on (primary) and one element cartridge (secondary). Place the filter wrench over the primary fuel filter. Turn it counterclockwise until the filter is loose enough to continue by hand. Remove the filter and place in a bucket.
What happens when you change the fuel filter?
Keeping your fuel system properly maintained by changing the fuel filter prolongs the life of the fuel pump. Dirt in the fuel is captured by the filter which clogs over time, causing it to operate less efficiently. The clogged filter reduces fuel pressure and volume in the fuel system.
How often should you change the secondary filter?
The secondary Filter cartridge can be changed less regularly than the primary and factory filter cartridges, we recommend every second time the factory filter is changed unless fuel contamination occurs. WHAT KIT DO WE RECOMMEND? Both options will provide much better protection than not having an additional filter.
Where do you put the secondary fuel filter?
This equipment is usually installed after the primary fuel filter and near the engine, where its main purpose is to catch any contaminants that the first filter may have missed. If your primary filter is in great condition, the secondary filter will likely function as a backup filter for leftover water or fine particles.
How do you change the fuel filter on a 6.4L diesel?
Replace the primary fuel filter (white plastic filter in kit) by snapping a new filter element into the fuel filter cap. 4b. Slide a new O-ring (provided) into posi- tion above the fuel filter cap threads. 6. Close the water and fuel drain port. This completes the primary fuel filter change.
How do you replace a fuel filter element?
P lace the open bag around the filter element, then loosen the element retaining bolt with a 7/16″ wrench releasing the fuel and element into the bag. Clean the lower part of the bowl that retains the element. It should be free of sediment. Fit the new element using the new rubber sealing rings provided.
Which is better post or factory fuel filter?
Being the larger size, they catch a lot of the larger particles and will keep your factory fuel filter cleaner, longer. The post-filter has a much finer filter and will stop particles between two to five microns getting into your fuel system, plus include another water trap as well.