Where to remove rear bumper on Mercedes E-class?
Removal of trunk carpet. These plastic fasteners can break easily and can be costly to replace. So be extra careful when removing them. Remove the 6 square pins left in the trunk by gently prying up and releasing the fastener. Two are located on the trim piece on the base of the trunk. The other four are located near the taillights. Figure 4.
Is the rear bumper of a Mercedes Benz broken?
The bumper is made to sacrifice itself and save the car. So it’s common for any car on the road today to have scratched up bumpers, sometimes even broken ones. Sometimes, a simple and easy process can make a world of difference on your Mercedes-Benz E-Class. Given the perils of daily driving, your rear bumper may have seen some bad times.
How do you remove carpet from a Mercedes Benz?
Removal of trunk carpet. There are only two pins on each side of the trunk’s carpet lining that need to be removed. They are circled in red in Figure 3. Take your time and use a flat head screwdriver to pry up on the center of the pin to release the fastener. Figure 3. Removal of trunk carpet.
What to do if your car bumper comes loose?
If the bumper is re-installed incorrectly, it could possibly come loose and be damaged. Tighten the two bolts under the new bumper. Install the fastners in the wheel well. Install the nuts near the base of the trunk. Move back the air tank to the proper position. Put back the base trim piece and the taillight connector.
How to remove wheel liner from Mercedes W211?
Front liner: To continue removing the rear section of the front wheel well liner: Remove two plastic rivets from the rear of the wheel well liner (red arrows). Using a trim panel tool, lever out the center pin. Then remove the rivet. Front liner: Now move to beneath the vehicle.
Where are the square pins on a Mercedes Benz?
Remove the 6 square pins left in the trunk by gently prying up and releasing the fastener. Two are located on the trim piece on the base of the trunk. The other four are located near the taillights. Figure 4. Removal of square pins at base of trunk. Figure 5. Removal of square pins near taillight.
Removal of trunk carpet. These plastic fasteners can break easily and can be costly to replace. So be extra careful when removing them. Remove the 6 square pins left in the trunk by gently prying up and releasing the fastener. Two are located on the trim piece on the base of the trunk. The other four are located near the taillights. Figure 4.
Removal of trunk carpet. There are only two pins on each side of the trunk’s carpet lining that need to be removed. They are circled in red in Figure 3. Take your time and use a flat head screwdriver to pry up on the center of the pin to release the fastener. Figure 3. Removal of trunk carpet.
Front liner: To continue removing the rear section of the front wheel well liner: Remove two plastic rivets from the rear of the wheel well liner (red arrows). Using a trim panel tool, lever out the center pin. Then remove the rivet. Front liner: Now move to beneath the vehicle.
How to troubleshoot Mercedes Benz air suspension problems?
Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.
When to replace shocks on a Mercedes-Benz W210?
With most W210’s reaching 150,000 miles or more, it’s not uncommon to see wheel bearings starting to wear out. Follow this fool-proof guide to replace them in a jiffy! Replacement of your rear shocks and springs is one of the most common procedures for your W210 Mercedes-Benz.
How do you remove the rear bumper on a Mercedes Benz?
Removal of 3 nuts at base of trunk. Remove the 10mm bolt and pin on the backside of the rear wheel wells to disconnect the wheel well liner from the bumper as seen in Figure 11. While pulling on the liner, you will see one bolt on each side of the car holding the bumper on. Remove that 10mm bolt as shown in Figure 12. Figure 11.
When did the Mercedes Benz E Class Bumper come out?
This article applies to the Mercedes-Benz E-Class (2002-2009). The bumper is made to sacrifice itself and save the car. So it’s common for any car on the road today to have scratched up bumpers, sometimes even broken ones. Sometimes, a simple and easy process can make a world of difference on your Mercedes-Benz E-Class.
If the bumper is re-installed incorrectly, it could possibly come loose and be damaged. Tighten the two bolts under the new bumper. Install the fastners in the wheel well. Install the nuts near the base of the trunk. Move back the air tank to the proper position. Put back the base trim piece and the taillight connector.