Is there a way to lower the soft top?
The soft-top can only be lowered when the stowage compartment base is at its lowest position. The base has a microswitch (red arrow) that monitors its position, preventing the top from opening when in the upper position. The stowage compartment base can be moved to the upper or lower position by turning the adjuster handles.
What happens to the soft top on a pelican?
There is a temperature sensor fitted to the hydraulic pump unit. At a temperature of 105 degrees C the pump is prevented from operating in order to protect the hydraulic system from damage. The soft-top can then only be operated manually. The pump hydraulic fluid can’t be topped up or replaced.
What kind of hard top does an M35A2 have?
The M35A2 was available with a canvas soft top or a metal hard top. Metal hard-top configurations are most often found on vehicles that have been equipped with cold-weather gear, including additional insulation in the cab, as well as engine coolant or multifuel-fired cab personnel heaters.
Why is my convertible top not working properly?
Check cylinders for fluid leaks. Another common reason why convertible tops fail to operate is due to leaks at convertible lift cylinders. The hydraulic cylinders move the hardtop or soft-top up and down. They have seals and o-rings that shrink and crack due to age.
How to operate the top switch on a convertible?
HOW TO OPERATE THE TOP SWITCH The top will work only in the “Park” or “Neurtal” positions, with key turned to “ACC” or “START”.
How to raise the soft top on a BMW Z4M?
1. Insert ignition key in driver door lock 2. Turn key clockwise and hold. The basic module immediately sends the “Easy Close” signal to the soft-top module 3. Remaining sequence as for “Raising the soft-top”, steps 2 to 7 4. The window regulators are then operated by the CVM control unit within 1.5 seconds.
What can I use to keep my convertible soft top looking good?
To fix the decolorization of the window, use a plastic care product such as Diamondite Plasti-Care, which is used to clear plastic surfaces such as windows, and headlights. If you keep on top of taking care of your convertible’s soft top it will extend its lifespan considerably.
What’s the difference between hard and soft top convertibles?
Soft top convertibles are the most common style of convertible cars. Soft tops are usually cheaper than hard tops to repair give a more authentic “convertible” look and feel. The main downsides are insulation and security.
Check cylinders for fluid leaks. Another common reason why convertible tops fail to operate is due to leaks at convertible lift cylinders. The hydraulic cylinders move the hardtop or soft-top up and down. They have seals and o-rings that shrink and crack due to age.
Which is better soft top or hard top?
Soft tops are usually cheaper than hard tops to repair give a more authentic “convertible†look and feel. The main downsides are insulation and security. But they do provide protection from the elements and are easy to fold back when you want to feel the wind in your hair.
How do you repair a soft top latch on a Miata?
You can use a small Phillips head screwdriver or a nail to align the pieces. Then remove the screwdriver and replace it with the pin. Snap the e-clip in place and you are done with the repair. Reinstallation is the reverse of removal..
How is the convertible top raised and lowered?
The manual convertible is raised and lowered by hand (once unlatched) with the help of hydraulic gas cylinders. The top lowers and raises fully automatically by means of electrohydraulic servo units that control the primary soft-top movements. The top / windshield top rail locks are operated by an electric motor.
How to lower a BMW Z4M convertible top?
1. Insert ignition key in driver door lock 2. Turn key anti-clockwise and hold. The basic module immediately sends the “Easy Open” signal to the soft-top module. 3. The window regulators are then operated by the CVM control unit within 1.5 seconds. 4. Remaining sequence as for “Lowering the soft-top”, steps 2 to 7 1.