How does a smart key work on an ignition switch?
As you insert the Smart Key remote into the Electronic Ignition Switch (EIS) control module (N73), power is supplied to the key by the induction coil ring located in the EIS. Data is then exchanged with the infrared transmitter to validate the Drive Authorization.
What to do if the key does not turn in the ignition?
If the key does not turn in the ignition, try moving the steering wheel as you try to turn the key. The steering wheel will feel completely solid if you try to move it in one direction and may move slightly in the opposite direction.
What to do if your Mercedes key won’t turn?
If you have this problem you will have to install a new / virgin EIS. You can not install a used unit because the EIS has to be paired / married to the car using Mercedes-Benz Star Diagnostic Software. They key itself may be the reason why the car doesn’t start. The key may open the doors, but it will not start the car.
As you insert the Smart Key remote into the Electronic Ignition Switch (EIS) control module (N73), power is supplied to the key by the induction coil ring located in the EIS. Data is then exchanged with the infrared transmitter to validate the Drive Authorization.
If you have this problem you will have to install a new / virgin EIS. You can not install a used unit because the EIS has to be paired / married to the car using Mercedes-Benz Star Diagnostic Software. They key itself may be the reason why the car doesn’t start. The key may open the doors, but it will not start the car.
If the key does not turn in the ignition, try moving the steering wheel as you try to turn the key. The steering wheel will feel completely solid if you try to move it in one direction and may move slightly in the opposite direction.
What to do if your car key won’t unlock?
A key fob casing is mostly plastic, and it gets exposed to lots of abuse. Tho two most vulnerable components are the buttons and the battery terminal contacts. A visual inspection is enough to find out if the terminals are broken or loose. Soldering them back to their position is likely to solve the problem.
Where is the spare key on a smart FOB?
Vehicles have a physical key for locking and unlocking the door. If you close and open your car door with the smart fob, this key is likely to be hidden inside the fob. There should be a release button or catch in the remote, pressing which will pop out the spare key. But some vehicles may not have a visible keyhole.
What should I do if my Mercedes key fob is not working?
If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light. The light should light up every time you press any of the buttons (Lock, Unlock, Panic, Trunk).
What should I do if my car key is not working?
A good first step is to change the keyless remote battery. (If you’ve already done this, keep reading.) When you press the button on your key, look at it carefully to see what happens. You should see a red LED light, and this should appear whenever the Lock, Unlock, Panic, or Trunk button is pressed.
How to get the key out of the ignition?
1 Put the key in the ignition. 2 Quickly remove it within 10 seconds and hold down the Lock button. 3 While holding the Lock button, press Unlock five times. 4 Release these buttons and press the Trunk button once. This should synchronize your remote.
How do you unlock the Mercedes C class key fob?
Insert the key and turn it to the “ON” position, then press and release the lock button on the key. Press and hold the remote’s unlock button. In 1-2 seconds, press the remote’s lock button five times in a row while holding the unlock button. Figure 4. Re-sync the SmartKey.
1 Put the key in the ignition. 2 Quickly remove it within 10 seconds and hold down the Lock button. 3 While holding the Lock button, press Unlock five times. 4 Release these buttons and press the Trunk button once. This should synchronize your remote. …
What to do if your smart key is not working?
If your SmartKey isn’t working, you might need to re-sync it. The main symptoms are the key won’t unlock the doors or start the car. You may see a blinking red light when you press a button. Insert the key and turn it to the “ON” position, then press and release the lock button on the key.
Insert the key and turn it to the “ON” position, then press and release the lock button on the key. Press and hold the remote’s unlock button. In 1-2 seconds, press the remote’s lock button five times in a row while holding the unlock button. Figure 4. Re-sync the SmartKey.
Why does the key not turn when inserted in the ignition?
The EIS module could also be the reason that the key does not turn when inserted in the ignition. Many car owners complain that the car starts fine on a warm or hot day but in cold days the car will not start. This may sound strange, but it is reported frequently.
If your SmartKey isn’t working, you might need to re-sync it. The main symptoms are the key won’t unlock the doors or start the car. You may see a blinking red light when you press a button. Insert the key and turn it to the “ON” position, then press and release the lock button on the key.
What’s the best way to turn the ignition?
Then insert the key into the ignition and gently jiggle the key without putting much pressure on the key as do this. As the lock pins on the tumbler wear out it will get harder and harder to turn the ignition of your car. Here is a video that will help you understand this problem.