How do you take a tire off a Mercedes c300?

How do you take a tire off a Mercedes c300?

Just follow these steps:

  1. Pull over to a level spot.
  2. Locate your vehicle’s spare tire, jack, and tire iron/lug wrench.
  3. Wedge a tire chock under each good tire.
  4. Use the lug wrench to loosen the lug nuts.
  5. Jack up the car just enough so that the flat tire is off of the ground.
  6. Remove the lug nuts and the flat tire.

Why does Mercedes use run flat tires?

Uses of Run-Flat Tires Run-flat tires, also known as Extended Mobility Tires allow you minimal movement with low tire pressure. That way you can get to your nearest tire shop or Mercedes-Benz service center near Greenlawn to have your tire replaced or repaired in no time.

Why are the lug nuts on my Mercedes not coming off?

Be sure to stay away from a metal mallet/hammer to dent or damage your car. One problem Mercedes-Benz owners may face is that they can’t get the lug nuts loose. Over time the lug nuts may corrode or simply refuse to come off. The lug nut wrench that Mercedes installs on these cars is inadequate to loosen these lug nuts and in can bend easily.

How do you lower a Mercedes Benz to the ground?

Lower the Mercedes-Benz to the ground by cranking the jack counter-clockwise. Remove the jack from underneath the car. Once the car is lowered to the ground, tighten the lug nuts in a star pattern: tighten the top lug nut first and then its opposing lug at the bottom.

What should I do if my Mercedes tire is not coming off?

Can’t get Mercedes tire off If the tire is not coming off, there are some quick fixes to remedy the situation. Try spraying WD-40 on the lug nuts and let it sit for at least 15 minutes. Use a rubber mallet and lightly hitting the inside part of the tire, not the rim, and break up the corrosion and built-up rust.

How do you change a flat tire on a Mercedes Benz?

Open the trunk of the car. Lift up the trunk floor and you will find a Mercedes-Benz spare tire, lug wrench, and a car jack. Using your lug wrench, loosen the lug nuts on the flat tire. Be sure not to remove the lug nut completely. Loosen them approximately one turn. Locate the jacking points on your Mercedes.

Be sure to stay away from a metal mallet/hammer to dent or damage your car. One problem Mercedes-Benz owners may face is that they can’t get the lug nuts loose. Over time the lug nuts may corrode or simply refuse to come off. The lug nut wrench that Mercedes installs on these cars is inadequate to loosen these lug nuts and in can bend easily.

Where are the lug nuts on a Mercedes flat tire?

The Mercedes jack is like any other jack. It just needs to be opened to the primary position in order to work. Loosen the lug nuts on the flat tire with the lug wrench. The five lug nuts are located around the Mercedes star logo in the center of the rim. Do not remove the lug, only loosen them about one turn.

Lower the Mercedes-Benz to the ground by cranking the jack counter-clockwise. Remove the jack from underneath the car. Once the car is lowered to the ground, tighten the lug nuts in a star pattern: tighten the top lug nut first and then its opposing lug at the bottom.

Can’t get Mercedes tire off If the tire is not coming off, there are some quick fixes to remedy the situation. Try spraying WD-40 on the lug nuts and let it sit for at least 15 minutes. Use a rubber mallet and lightly hitting the inside part of the tire, not the rim, and break up the corrosion and built-up rust.