Where is the OBD plug on a Mercedes Sprinter?
OBD connector location for Mercedes Sprinter – Type 906 (2006 – 2018) You will find below several pictures which will help you find your OBD connector in your car. OBD plug is under the steering wheel (left side) Go to the OBD2. scanner for MERCEDES. Remove the cover with the screw (turn a quarter)
How to tell if a Mercedes Sprinter has a fault?
If no control voltage is present look for a break in the wiring from the valve to the ECU. Trace back the wires to the ECU connector and prove continuity exists from the ECU connector to the valve. Pin outs and wire colours are given in the included diagrams.
When did the Mercedes Benz Sprinter come out?
In this article, we consider the second-generation Mercedes-Benz Sprinter (W906, NCV3), produced from 2006 to 2018.
What does limp home mean on Mercedes Sprinter?
Mercedes Sprinter Turbo – Limp Home (LHM) Diagnostics. You will probably read a great deal on the internet regarding the issues surrounding your Sprinter lapsing into limp-home mode without showing any EML (Engine Management Warning Lamp).
OBD connector location for Mercedes Sprinter – Type 906 (2006 – 2018) You will find below several pictures which will help you find your OBD connector in your car. OBD plug is under the steering wheel (left side) Go to the OBD2. scanner for MERCEDES. Remove the cover with the screw (turn a quarter)
What does the check engine warning light on a Mercedes Sprinter mean?
Description: The Mercedes Sprinter engine oil level light comes on in yellow and is typically associated with low engine oil level. Description: The Mercedes Sprinter check engine warning light has several potential faults associated with it. When the check engine warning light comes on, fault codes are stored and must be read by a diagnostic tool.
How to check the authenticity of a Mercedes-Benz Sprinter?
This format was implemented by the ISO institute. Every car manufacturer is obliged to mark all its vehicles in this special format. This online service allows a user to check the validity of the car and get detailed information on almost any VIN number, search for Mercedes-Benz SPRINTER car parts and check the car’s history.
What does the VIN number on a sprinter mean?
Mercedes-Benz SPRINTER VIN decoder Every Mercedes-Benz car has a unique identifier code called a VIN. This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.
Is there a relative compression test for sprinter?
There is a relative compression test available using the wiTECH scan tool. Acceptable values between two cylinders must be equal to or less than 15 rpm. Restricted or aerated fuel supply to the high pressure pump. Actual versus desired too far apart, map the fuel pressure graph, if you have a fluctuation over 500 psi this may cause a surge.
What is the repair manual for a Mercedes Sprinter?
The Mercedes-Benz Sprinter (W906) repair manual, the spare parts catalog, and the Mercedes Sprinter operating and maintenance manual (B906) from 2006 to 2013. release. The models were equipped with diesel engines OM651.955 / 956/957 (2,2 l Common Rail), OM646.984 / 985/986/989/990 (2.2 L Common Rail), OM642.896 / 992 (3.0 L Common Rail).
What should the fuel pressure be on a sprinter?
Sprinter Fuel Rail Pressure Regulator Problems – Poor Starting. If it is possible to monitor rail pressure using Live-Data, you may see the rail pressure dancing between 266 and 550 bar. Instability of pressure when holding a steady throttle will be the clue as to a problem with the fuel pressure control.
There is a relative compression test available using the wiTECH scan tool. Acceptable values between two cylinders must be equal to or less than 15 rpm. Restricted or aerated fuel supply to the high pressure pump. Actual versus desired too far apart, map the fuel pressure graph, if you have a fluctuation over 500 psi this may cause a surge.
What should the rail pressure be on a Sprinter diesel?
Check rail pressure when engine is off, it should be 0 PSI (+/- 500 PSI). Aerated or restricted fuel supply. Excessive idle time can cause white smoke when cold due to carbon build up on injector tips. More than 20% idle time is excessive. 2007-2009 model years use an electric supply pump in the tank to feed the CP pump at 59 +-2 PSI.
When to replace fuel pressure solenoid on sprinter?
If it is and there is leakage, replace the fuel pressure solenoid. The high pressure pump is driven by the camshaft, and requires no timing. Fuel that enters the high pressure pump is pressurized between 200-1600 bar (2,900 – 23,205 psi). The pressurized fuel is then supplied to the fuel rail.