Where is the starter located on a 2007 Mercedes Benz?

Where is the starter located on a 2007 Mercedes Benz?

It is mounted to the transmission flange where it attaches to the motor.

How to replace the starter in a Mercedes C class?

If you have a Mercedes-Benz with the V6 or V8 engines these instructions will help you. The C-Class is the most difficult of all the other models because there is very little room in the engine bay. Once you remove the starter from the engine block most mechanics and also the Mercedes-Benz dealer remove the exhaust to get the starter out.

What kind of starter does a Mercedes Benz use?

This starter will fit Mercedes-Benz with the V6 and V8 engines which are found on several models such as the C CL CLK E G ML R S SL SLK SLR AMG class and on Chrysler Crossfire. We assume you already have a set of tools, wrenches, and screwdrivers.

Where to remove the starter from a Mercedes medic?

Remove the 16 mm bolt on top of the engine mount. It is located under the exhaust so it will be difficult to see the top of the bolt, but having the right wrench turns this task from almost impossible to easy. On the bottom of the engine mount, there should be a 13 bolt that you will need to remove as well.

What to do if your car starter wont start?

If you are stranded in a middle of a desert and suspect that your starter is the problem we have a tip for you. You can tap the starter with a hammer or rock in your case, which causes the brushes to make contact again. This could allow your car to start one more time.

If you have a Mercedes-Benz with the V6 or V8 engines these instructions will help you. The C-Class is the most difficult of all the other models because there is very little room in the engine bay. Once you remove the starter from the engine block most mechanics and also the Mercedes-Benz dealer remove the exhaust to get the starter out.

This starter will fit Mercedes-Benz with the V6 and V8 engines which are found on several models such as the C CL CLK E G ML R S SL SLK SLR AMG class and on Chrysler Crossfire. We assume you already have a set of tools, wrenches, and screwdrivers.

Remove the 16 mm bolt on top of the engine mount. It is located under the exhaust so it will be difficult to see the top of the bolt, but having the right wrench turns this task from almost impossible to easy. On the bottom of the engine mount, there should be a 13 bolt that you will need to remove as well.

What’s the best way to replace a starter?

Here is the trick to removing the starter. The dealer and most mechanics remove the exhaust, but we have a better solution. You can remove the engine mount on the passenger side wich will give you room to remove the old starter and install the new one.

Where is the starter located on a 2007 Mercedes-Benz?

Where is the starter located on a 2007 Mercedes-Benz?

It is mounted to the transmission flange where it attaches to the motor.

Can you change the starter on a Mercedes Benz?

Make sure to troubleshoot the problem correctly because changing the starter on a Mercedes-Benz is not an easy task. If you get a click or several clicks when you try to start the car it is possible that you may have a weak battery or a bad battery terminal connection.

How do you remove a starter from a car?

Install in the reverse order of removal. Simply bolt the starter back in the crankcase, and bolt the engine mount back in its place. Re-install the bracket and clamps holding the wire going to the battery. Finally, install the 3-part engine shield back and bolt it in place.

How do you change the battery on a Mercedes ML320?

Replacing the battery in your ML320 involves removing the terminals. When you reconnect the terminals, your radio presets are likely to be cleared out. In some ML320s, you may need to re-enter a security code to get your radio to work again.

Where to remove the starter from a Mercedes medic?

Remove the 16 mm bolt on top of the engine mount. It is located under the exhaust so it will be difficult to see the top of the bolt, but having the right wrench turns this task from almost impossible to easy. On the bottom of the engine mount, there should be a 13 bolt that you will need to remove as well.

How do you replace a Mercedes Benz starter?

Place a wood block right under the engine, close to the side of the mount that you will be removing and raise the engine one or two inches. This will allow you to remove the engine mount. Remove the engine mount. Motor mounts look like this. Mercedes-Benz Engine / Motor Mount Remove the old starter now that you have room.

Where is the starter battery located on a Mercedes?

This is where the systems battery will be located. On vehicles with two batteries (starter battery and systems battery), usually S-class (221) and SL class (230/231) the starter battery needs to be connected first.

Do you have to disconnect starter battery to change battery?

Therefore, if you are replacing the systems battery (in the trunk) you need to disconnect the negative battery cable from the starter battery (under the hood). Once the systems battery has been replaced you can reconnect the starter battery.

What kind of battery do I need to change my Mercedes?

On vehicles with two batteries (starter battery and systems battery), usually S-class (221) and SL class (230/231) the starter battery needs to be connected first. Therefore, if you are replacing the systems battery (in the trunk) you need to disconnect the negative battery cable from the starter battery (under the hood).

Posted In Q&A