What do the warning lights on my Mercedes mean?

If you have a Mercedes car or van, this is where you can find out what those dashboard warning symbols mean. Each warning light is explained for your model of car or van, plus what action you should take based on Mercedes-Benz recommendations.

Why does my Mercedes S550 have a red battery symbol?

I drive an S550 and this is the luxury of luxuries. However, do some recon on your own when it comes to the RED battery symbol and the ABS/ESP warning on the dash. This happened in my S550…I changed brake switch, main engine battery, reset the computer…My last resort was to change the auxiliary battery in the TRUNK.

How do I Turn Off the ESP light on my Mercedes?

ESP light stay on constantly if the “ESP Off” button was pressed. To turn it off: Press the ESP button on the dash of your Mercedes-Benz and hold it for 5 seconds. This will reset the light.

What to do when ESP light in Dash comes on?

To turn it off: Press the ESP button on the dash of your Mercedes-Benz and hold it for 5 seconds. This will reset the light. If the light doesn’t go off then you have a malfunction and should troubleshoot the problem or visit a repair shop. What does ESP do then?

What do the lights on the Mercedes dashboard mean?

Modern Mercedes-Benz cars are filled with lots of sensors that monitor how each system in the car is behaving. The lights on the dashboard display what systems are in use and they also highlight when one of those systems is not working as it should. But what do all those different symbols mean?

What does the ABS warning light on a Mercedes mean?

If the ABS warning light is also illuminated this signals that the braking system has malfunctioned and your brakes may not work properly. In this case the Electronic Brake Force Distribution (EBD) warning light may also be illuminated. Can I still drive with my parking brake and brake fluid light on?

What does the ESP light mean on a Mercedes?

The ESP light will light up with the word ‘OFF’ if the system has been deactivated, in which case you may have inadvertently turned it off. To check, try stopping and restarting the engine. If the light remains on after restarting get it checked at a garage as the ESP system is an important safety feature.

Or, if you have RAC Breakdown Cover, call for recovery. This warning light indicates that there’s a problem with the power steering. For electric powered systems, this problem could be as simple to fix as rebooting a computer. Find a safe place to stop and try turning the car off and back on again after 30 seconds.

How to reset check engine light on Mercedes slk230?

I found on the wiki a method how to reset check engine light on your MErcedes SLK230, switch the key in ignition on position 2, turn steering wheel full left then full right and back to centre and warning lights will be reset. This works only after you changing the battery.

How to reset service light indicator Mercedes SL 500?

Within 10 seconds, turn key in steering wheel lock to position 0. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds). Release button.

When does the ESP light turn on in a Mercedes?

To check, try stopping and restarting the engine. If the light remains on after restarting get it checked at a garage as the ESP system is an important safety feature. If you have a diesel Mercedes, this light will turn on when the engine is warming up.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

Where is the brake light switch on a Mercedes Benz?

The brake light switch is located right above the brake pedal. To access it, remove the underside panel cover. Usually, the panel is held in place with 3 to 5 screws. Mercedes-Benz uses Torx head screws.

Can you read the fault code on a Mercedes Benz?

Can read fault codes from multiple systems such as transmission, engine, ETS, airbag and more. Can clear fault codes. Can read and erase all fault codes on Mercedes-Benz cars. Only works on MB but can perform further troubleshooting including SBC brake systems, convertible systems, Air Conditioner (A/C) system. 3. Mercedes-Benz Star Diagnostic DAS

What happens when a Mercedes Benz goes into limp mode?

When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level. The transmission has a dipstick tube but with no dipstick in it.

Is it dangerous to drive a car that is slow to accelerate?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

What does the yellow AdBlue warning light mean?

Adblue® is a type of diesel exhaust fluid. If this light turns yellow it means the diesel exhaust fluid level is low, which will eventually prevent your engine from starting. Can I drive with my exhaust fluid warning light on?

Why is my Mercedes Benz C class not starting?

To avoid this, cancel and sign in to YouTube on your computer. For my love of food, tech and travel. An error occurred while retrieving sharing information. Please try again later.

Can a battery malfunction on a Mercedes Benz?

Mercedes-Benz Auxiliary Battery Malfunction Explained Mercedes-Benz models are well-known for their impressive technology list, and many of their modern cars have two batteries – the main battery and an auxiliary battery. If this auxiliary battery develops a malfunction, it will show up as an error message on the dashboard.

Where is auxiliary battery in W213 e220d located?

You will need to remove some nearby plastic mouldings and peel back the carpet to gain access to the battery area, and the fastenings can be undone with a 10mm socket. You should also disconnect the main battery before attempting the work.

What is the auxiliary battery number on a Mercedes Benz?

Auxiliary battery voltage convert has 3 part number, the newest one is A2059053414, which supersedes older numbers A2054400073 and A2059052809. B21DC01 – The buffer battery of the electronic ignition lock has a malfunction.

How to permanently disable Mercedes-Benz ECO start / stop?

No, you can remove the plugin at any time and the default settings will return, so that means you can use our module disable eco stop/start at any time and enable as well and you can do it unlimited time free of charge. To remove the plugin, turn the ignition but do not switch the car on.

When does a Mercedes Benz engine cut off?

Once activated, the car’s engine will cut off whenever you are stationary (at traffic lights, at roundabouts, in traffic etc). Once the car starts moving again, the engine will restart as soon as your foot is off the brake.

How to reset service light on Mercedes E300?

If your vehicle has an ignition button, press the START-STOP ENGINE button twice without touching the brake pedal. Make sure the TRIP and TOTAL DISTANCE millage are displayed in the multi-function display. Remember! Don’t press the buttons simultaneously, the timing is very decisive at this step!

What should I do if my Mercedes Benz won’t stop?

If fault message doesn’t dissapear after running car on with parking, try our other advices from top to bottom, as we did fix many mercedes-benz with the same malfunction.

Why is my brake light not working on my Mercedes?

Yes it could be the brake light switch. It could be other problems such as low brake fluid level or failed ABS wheel speed sensor. There is no certain way to know without first doing some troubleshooting. Where is the brake light swtich located on a Mercedes-Benz? Right above the brake pedal.

What to do when your Mercedes goes into limp mode?

You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.

What to do if you have a Mercedes transmission problem?

An advanced diagnostic scanner such as the iCarsoft or the Launch Creader listed here are a must for do-it-yourself Mercedes-Benz repair. They are affordable and can access most of the systems on your Mercedes-Benz including Airbag, EPS, ETS, Transmission, Engine, front and rear SAM, SRS, brakes and a lot more. 3.

What are the problems with a 1996 Mercedes C220?

Some 1996 Mercedes C220 may experience failing catalytic converters, excessive oil consumption,electrical connector problems, failed mass air flow sensors, and in some cases the engines may need some major mechanical repairs, even complete engine replacement!

Why is the SRS warning staying on on a Mercedes Benz?

Why is the SRS warning staying on? Here is a list of some of the most common problems with the SRS system on a Mercedes Benz. Seat Occupancy Senor in the passenger seat. Low voltage in the electrical system. Battery issue or charging. Seat belt latch. Damaged Wire Contacts at the doors. Defective, damaged or loose contact at the impact sensors.

What should I do if my Mercedes FOB is not working?

If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light.

How can I tell if my Mercedes remote is working?

Next, we need to check if the remote is sending out a message. The remote emits infrared waves. While you can’t see infrared light with your eyes, there is an easy way to check. Grab your phone and turn on the camera. Point the camera to your phone and carefully see if you notice a light every time you turn you press a button on the remote.

Why is my Mercedes-Benz E320 AC not working?

Learn if it’s a simple fix or time to seek out a trusted technician. Not your vehicle? Why Isn’t My A/C Working? What are common reasons my Mercedes-Benz E320 has air conditioning problems?

Are there any problems with my Mercedes ML 320?

Low range light flashing. Power steering problems. Will need power steering pump replacement. Door lock actuators also tend to be prone to failure. Plastic trim inside the car break easily. Window regulator. Fuel pump. Oxygen sensors. Alternator may need replacement between 130k and 170k miles.

How much does a 1998 Mercedes E Class E 320 cost?

Used 1998 Mercedes-Benz E-Class E 320 Sedan 4D Prices | Kelley Blue Book See pricing for the Used 1998 Mercedes-Benz E-Class E 320 Sedan 4D. Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the 1998 Mercedes-Benz E-Class E 320 Sedan 4D. View local inventory and get a quote from a dealer in your area.

Why does my Mercedes Benz make a clicking sound?

The clicking sound and the rest of the symptoms may be attributed to a broken stepper motor lever or the footwell damper linkage. This is a common problem in MB C230, C240, C320, CLK320, CLK350, CLK500 but this problem can affect other Mercedes-Benz models such as E, S, CLS, GL, ML Class.

Why are the lights on my dashboard not working?

Adjust the dial or knob to see if that fixes the problem. If the switch was accidentally bumped, your dashboard lights might have been turned off. Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb.

Where are the lights on the dashboard located?

Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.

Why does my Mercedes not start when I turn the key?

Despite this brand’s high quality, though, Mercedes’ can develop problems with or without regular car maintenance. There are a few theories about why your Mercedes refuses to start when you switch the key in the ignition. It is infuriating to slide behind the wheel, turn the key, see dash lights blink, but the engine won’t turn over.

Why does my Mercedes Benz refuse to start?

There are a few theories about why your Mercedes refuses to start when you switch the key in the ignition. It is infuriating to slide behind the wheel, turn the key, see dash lights blink, but the engine won’t turn over. When you least expect it, running late on your way to a special event, you try turning the key again.

Why are there warning lights on my dashboard?

When your vehicle’s computer senses a problem with a prominent piece of equipment such as the transmission or engine, it will send out a code to alert you. This will result in a warning light appearing on your vehicle’s dashboard.

Why does my Bas light come on in my Mercedes Benz?

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times. Turn off the engine. Restart. Brake Light Switch may cause BAS / ESP / ABS light to come on. It is the most common problem with Mercedes-Benz cars.

Why is the brake light switch on my Mercedes not working?

If you don’t see the letters on the cluster change from P to R to N, it is a good sign that the gear selector module is defective. You can buy a new brake light switch on Amazon for less than $15 USD, just do a search for Mercedes-Benz Brake Light Switches.

How to reset the lights on a Mercedes Benz?

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times.

What are the readiness monitors for Mercedes Benz?

Many drivers have had difficulty completing readiness monitors for their Mercedes Benz. The two readiness monitors that seem to be the most stubborn to complete are: Secondary Air Injection and Catalyst (Catalytic Converter). We located a Mercedes Benz Service Bulletin (S-B-14.00/17) that may be helpful.

When did the Mercedes-Benz ML 320 come out?

No accident or damage reported to CARFAX… 1st owner purchased on 10/11/07 and owne… Last serviced at 174,104 miles in Frankl… 1st owner drove an estimated 16,238 mile… No accident or damage reported to CARFAX…

What are the most common Mercedes Benz transmission problems?

Top 5 Mercedes-Benz Transmission Problems. Won’t come out of Park gear due to a defective brake light switch. ( DIY How to replace the Brake Light Switch) Continue to read if you would like to learn how to troubleshoot your Mercedes-Benz transmission yourself and where you should start. 1. Check Fluid Level

Where are the transmission codes stored in a Mercedes?

Specific codes related to the transmission are stored in the TCU (Transmission Control Unit) and come generic codes such as P0705 are stored in ECU (Engine Control Unit). You don’t need to pay anyone to read the codes; you can retrieve them yourself in a couple of minutes with the right OBD II scanner.

What does it mean when your ESC light is flashing?

Also called Electronic Stability Control (ESC), this warning light indicates a problem with traction control. If it’s flashing it means the ESP system is intervening – for example, if you’re driving on a slippery road. If the light stays on it means the ESP system is not working properly.

Are there any problems with the Mercedes SLK 230?

Click to expand… I have 2 convertibles- the SLK and a TR6- and both have the large plugs removed from the trunk/boot under the spare wheel due to potential and serious problems with water ingress. Click to expand… I just got my 99′ SLK 230 out of storage and the transmission in drive (D) (automatic) won’t shift past 1st gear.

When do Mercedes Benz motor mounts start to loose fluid?

CAUTION: Make sure no one is standing on the front or back of the car when you perform this test. Mercedes-Benz motor mounts are fluid filled instead of rubber mounts that are used on most cars. Mercedes-Benz the engine mounts start to loose fluid around the 100k mile mark.

When does vibration start in a Mercedes Benz?

Mercedes-Benz the engine mounts start to loose fluid around the 100k mile mark. Once a crack develops on the motor mount, they loose all the fluid over time and the vibrations get worse. Mercedes cars have three mounts.

Why are the wires on my Mercedes Benz so short?

This can lead to wires short together or to the body of the vehicle, leading to arcing causing further damage to the vehicle wiring. Like other German manufactures, Mercedes Benz’s wire harnesses are covered in a plastic covering making it harder to visually examine wiring.

How does the defrost button on a Mercedes work?

The defrost button has three lines going through it, while the recirculated air button has a picture of a car with a curved line through it. Hold these buttons down for about five to 10 seconds, or until the LED lights on both buttons start flashing. Wait 45 to 60 seconds for the LED lights to stop flashing. Then turn off the car.

What kind of light bulbs do Mercedes Benz use?

Mercedes Benz Bulbs. Headlight, brake, tail, indicator and interior. If you’re looking for car bulbs to fit your Mercedes-Benz then look no further than ABD.co.uk.

Where is the turn signal on a Mercedes?

The turn signal switch is part of the combination switch found in the steering column and is mounted right behind the steering wheel. You may also notice that the wiper switch is not working either.

Where do you change the light bulbs on a Mercedes SLK?

Look at the back of the lighting assembly. Determine which light bulb you want to replace. The bulb closest to the grille on either side is the low-beam headlight, which is your primary headlight. The bulb next to it is the turn signal. The bulb next to the turn signal on the other side is the high-beam headlight.

How to replace a light bulb in a Mercedes Benz?

Light bulb replacement guide for Mercedes-Benz cars. Look up your Model on the first column then move over to the right and click on the year or chassis type. If there is something we don’t have on this page check out Philips website here.

Where can I buy a Mercedes brake light switch?

You can buy a new brake light switch on Amazon for less than $15 USD, just do a search for Mercedes-Benz Brake Light Switches. In the video below you will can see how easy it is to replace the brake light switch on a Mercedes-Benz E-Class.

What do you need to know about Mercedes tail lights?

Most Mercedes tail lights deal with changing the bulbs, persistent faults, lights remaining on and so on. When facing issues with the Mercedes tail lights, owners can have questions. Seeking the advice of Experts will help obtain the right information and guidance for users.

Where is the reset SRS light on a Mercedes Benz?

Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car.

When does the oil warning light come on?

The oil warning light comes on when either the oil temperature gets too high or the oil level or pressure is too low. If the oil is not lubricating the engine effectively it could lead to expensive or even irreparable engine damage, so it’s important to act quickly. Can I still drive with my low engine oil light on?

Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car.

What does it mean when brake warning light comes on?

If it comes on with the brake warning light, it could indicate that the brake system is failing and you should stop straight away and call for recovery if you have breakdown cover. For roadside assistance, you can call the RAC on 0330 159 1111 even if you’re not a member.

What do the warning lights on the Mercedes E320 mean?

It’s important to know what the dashboard Mercedes-Benz E320 warning lights actually mean, though, not least because they can pre-empt a car breakdown or full-on failure, potentially saving you from an expensive repair bill and meaning you stay safer on the road.

What does the SRS light mean on a Mercedes Benz?

What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.

What to do if your Mercedes Benz check engine light comes on?

Next time you fill up your car with gas, make sure to tighten the gas cap or the service engine light may come on. If the check engine light comes on for other reasons you can use an OBD II scanner to read and erase the engine fault codes on your Mercedes-Benz.

Why are my Window regulators failing on my Mercedes?

Window regulators do the hard work when you press the button to lower or close the windows. They do tend to fail more on Mercedes-Benz ML-Class and C-Class based on our experience. Window regulators don’t fail on Mercedes-Benz cars only. They are a common problem on BMW, Lexus, and Audi. Window regulators can easily be replaced.

What are the most common problems with Mercedes Benz cars?

8 Most Common Mercedes-Benz Problems 1 Rust. Rust behind license plate / trunk area. 2 Engine Mounts. Engine mounts on Mercedes-Benz cars are oil filled. 3 Suspension & Steering Components. Ball joint / front control arm. 4 Window Regulators. Broken window regulator on Mercedes C-Class. 5 AirMatic Components. …

How to fix no power no start on most Mercedes-Benz?

HOW TO FIX NO POWER NO START ON MOST MERCEDES-BENZ VECHICLES DIY. – YouTube HOW TO FIX NO POWER NO START ON MOST MERCEDES-BENZ VECHICLES DIY. If playback doesn’t begin shortly, try restarting your device.

Why is the battery on my Mercedes Benz not working?

Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars. How old is the battery on your Mercedes-Benz?

What kind of battery does a Mercedes Benz use?

You can check price and read reviews for multiple Mercedes-Benz AGM Group 94 Batteries that will fit your Mercedes-Benz. You know you have a relatively new battery. You go to start your Mercedes-Benz and you either hear it turn over once or hear several clicks as in this video. This opens in a new window.

How do you reset the Check Engine light on a Mercedes?

The light is designed to come on when the vehicle passes certain mileage limits. You can reset the “check engine” light on your Mercedes within a few minutes. Insert the key in the ignition switch and turn it without starting the car. Pay attention to the display on the instrument cluster between the speedometer and the tachometer.

What does the Check Engine light on a Mercedes mean?

Mercedes-Benz owners may notice the check engine light plus P0170 and P0173 codes. In theory, these two codes mean that the fuel mixture is too rich or too lean. Most of the time these Mercedes-Benz fault codes are caused by a defective .

What causes auto lamp function inoperative in Mercedes?

In case of an emergency To get your Mercedes started manually, grab the Start/Stop button and pull it … You get into the car and start your Mercedes-Benz. Next, you are greeted with “Auto Lamp Function Inoperative” error message on the dashboard. This problem is most often caused due to Mercedes-Benz light sensor malfunction.

Why does my Mercedes alarm keep going off?

Mercedes alarm may go off even when no one is trying to steal the car. We have seen many cases when a … Mercedes-Benz radar system may malfunction and set errors in various Mercedes modules including Parktronic System, Collision Prevention Assist Plus and Distronic Plus, autonomous driving, Active Brake Assist Cross Traffic, etc.

What was the problem with my Mercedes Benz?

Recently we have been working on a Mercedes-Benz with some major and unexplainable electrical issues. The problem started with the Keyless Go feature. The key would unlock the car via keyfob and start it by inserting the key in the ignition. But Keyless Go stopped working. Push Start or unlocking …

Navigation