Where is the fuse box in the passenger compartment?
Fuse box location. Passenger compartment fuse box. The fuse panel is located behind a trim panel on the left side of the driver’s footwell near the parking brake behind the cover. To remove the trim panel, slide the release lever to the right then pull the trim panel out.
Where is the fuse box on a Dodge Dakota?
Cigar lighter (power outlet) fuses in the Dodge Dakota: fuse #17 in the Instrument panel fuse box, and fuse “D” in the engine compartment fuse box. The fuse panel is located behind the cover on the driver’s side of the instrument panel.
Where are the fuses on a front SAM unit?
P32/4 Front SAM control unit with fuse. Relay module N10/1 EGS Unit Transmission control unit. Intellignet Servo Unit. Direct Select Prefuse Box Hidden behind the dash, passenger side. P32/4 Fuse 38 is a 5-ampere fuse, for the additional auxiliary battery G1/7, EZS control unit N73, and Front SAM control unit.
Where is the fuse box on a Ford Edge?
The fuse panel is located behind a trim panel on the left side of the driver’s footwell near the parking brake behind the cover To remove the trim panel, slide the release lever to the right then pull the trim panel out.
Passenger compartment fuse box. The fuse panel is located under the right-hand side of the instrument panel behind the cover. To remove the trim panel for access to the fuse box, pull the panel toward you and swing it out away from the side and remove it. To reinstall it, line up the tabs with the grooves on the panel, then push it shut.
How do you remove the fuse box cover?
To remove the trim panel for access to the fuse box, pull the panel toward you and swing it out away from the side and remove it. To reinstall it, line up the tabs with the grooves on the panel, then push it shut. To remove the fuse box cover, press in the tabs on both sides of the cover, then pull the cover off.
Where are the fuses located on a Mercedes Benz?
Here you will find fuse box diagrams of Mercedes-Benz ML230, ML270, ML320, ML350, ML400, ML430, ML500, ML55 1998, 1999, 2000, 2001, 2002, 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
Where are the fuse panels on a Ford Expedition?
Here you will find fuse box diagrams of Ford Expedition 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay. See other Ford Expedition:
Fuse box in passenger compartment. fuse box location. The instrumet panel junction block is located under the instrument panel on the left side. Remove the lid. fuse box diagram. legend. F1 (7,5A) Instrument panel F2
How do you remove a fuse box from a car?
Once the lid is off and set aside, find and disconnect the power supply to the fuses. There is a possibility the power supply is routed through the bottom. In that case, skip to step 4 to remove the fuse box housing to access the wires, and then come back to step 3 before proceeding.
What to do if your fuse box is clicking?
If that relay also clicks constantly, you need to run more tests. If that relay works fine, then the original relay that was in that spot is faulty. Simply replace that relay with a new one. Identify the terminals on the relay. Look at the terminal labels on the relay.
Where is terminal 85 on a fuse box?
Terminal 85 is the relay’s connection to ground, 87 and 87a are the output terminals for whatever the relay controls and 86 is the power to the control side of the relay. Check for constant ground to the relay. Identify the slot in the fuse box that terminal 85 plugs into.
If that relay also clicks constantly, you need to run more tests. If that relay works fine, then the original relay that was in that spot is faulty. Simply replace that relay with a new one. Identify the terminals on the relay. Look at the terminal labels on the relay.
Where is the fuse box in a car?
Your car’s fuse box holds a variety of fuses with different ratings and most likely several relays. It is located under the hood in the engine bay, typically somewhere easy to get to that is less likely to be damaged in a collision. However, it is common for there to be an additional interior fuse panel inside the cab of the vehicle.
Terminal 85 is the relay’s connection to ground, 87 and 87a are the output terminals for whatever the relay controls and 86 is the power to the control side of the relay. Check for constant ground to the relay. Identify the slot in the fuse box that terminal 85 plugs into.
What does a relay do in a fuse box?
Relays control a high-current circuit using low current. It makes it possible to control things like the headlights and the fuel pump without running high-amperage current into the passenger compartment. Try swapping the relay. Remove the relay from the fuse box — It pulls straight out.
How do you remove fuse cover on Ford Edge?
To remove the fuse panel cover, press in the tabs on both sides of the cover, then pull the cover off. To reinstall the fuse panel cover, place the top part of the cover on the fuse panel, then push the bottom part of the cover until it clicks into place. Gently pull on the cover to make sure it is secure.
How do you remove a fuse from a trim panel?
To reinstall the trim panel, align the tabs on the bottom of the panel with the grooves, push the panel shut and slide the release lever to the left to secure the panel. To remove a fuse, use the fuse puller tool provided on the fuse panel cover.
Where are the fuses on a Ford Explorer?
Fuse box diagram (fuse layout), location and assignment of fuses Ford Explorer UN105/UN150 (1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003). Fuses and circuit breakers protect your vehicle’s electrical system from overloading.
What to do if your windshield wiper dies?
Pull the fuse and check it for breaks in the filament, or in the case of a glass fuse, check for fog in the tube. If the fuse appears damaged, replace it with a fuse of identical amperage. If the fuse is good and undamaged, then the wiper stalk, wiper/washer switch or the wiring to-or-from either become the prime suspects.
Why is my Wiper not working on my car?
If nothing works, an electrical problem could be the culprit, possibly a blown fuse. A bad fuse on its own doesn’t occur often, but occasionally, finding and changing a bad fuse can get your wipers working again. A word of caution: because you’re working with the wiper system, a blown fuse should be treated very carefully.
What to do if your windshield wiper fuse is blown?
A word of caution: because you’re working with the wiper system, a blown fuse should be treated very carefully. If the fuse is blown, there’s a good chance that replacing the fuse won’t cure the underlying problem. Consult your mechanic at your earliest convenience to avoid a system failure under hazardous conditions.
What kind of Fuse do I need for wiper motor?
So the wiper motor needs a 30 amp fuse, while the tire pressure monitor uses only a 5 amp fuse. In both cases, in the event of a short circuit the properly rated fuse will blow. Always use the proper fuse. Auto fuses are marked and color coded (Figure 3). The two common sizes (regular ATC and mini ATM) are available at auto parts stores.