When does the ASR light come on in my car?
Was able to find a compatible EA/CC/ISC [N4/3] module to test in my car. Well, it worked for a while! Same thing after 6 trips or so: If the car is stopped after high speed driving and then into stop-go traffic for 10 mins or so, ASR light comes on. The engine heat builds to 100C or so when the key is switched on.
Is there a problem with the ASR on a Mercedes?
I guess that if you own a Mercedes, you will at some time get that problem! The ASR problem seems to occur in two distinct ways: It can occur while driving and gives the driver quite a start! The car goes into the LH mode (will be described later) and the accelerator pedal does not respond as before. It’s quite a ‘trip’ to drive the car.
What is code 30 for ABS W ASR?
ABS w/ ASR Module: Code 30 – – CAN bus to EA/CC/ISC faulty. LH-SFI Module: No codes. DI Modules: No codes. I removed all of the modules in the F23 box, removed the box frame itself, and inspected all of the wiring to the connectors especially to slots 4/5 (ABS w/ ASR) and 6/7 (EA). All wiring was ‘solid’. Using an ohmmeter, the CAN bus was checked.
Is there an ASR problem on my S500?
All readings ok: 120 ohms across the bus and continuity to all modules on the bus. After re installing the modules, which had all cooled down, the car was started, NO ASR lamp. Ran perfectly. Drove it for about 20 minutes, parked it in the sun (yesterday in SD, it was 95degs).
What does ABS Bas, ASR, ABS lights mean?
What ASR, BAS, ABS lights mean. Common problems and possible solutions. What do ABS BAS ASR lights mean? If any of these lights turns on and stay ON once you start to drive the car it means there is a problem with one of the following systems or related sensors. Step 1: Ensure that the main battery on your Mercedes-Benz is holding a proper charge.
Was able to find a compatible EA/CC/ISC [N4/3] module to test in my car. Well, it worked for a while! Same thing after 6 trips or so: If the car is stopped after high speed driving and then into stop-go traffic for 10 mins or so, ASR light comes on. The engine heat builds to 100C or so when the key is switched on.
I guess that if you own a Mercedes, you will at some time get that problem! The ASR problem seems to occur in two distinct ways: It can occur while driving and gives the driver quite a start! The car goes into the LH mode (will be described later) and the accelerator pedal does not respond as before. It’s quite a ‘trip’ to drive the car.
What ASR, BAS, ABS lights mean. Common problems and possible solutions. What do ABS BAS ASR lights mean? If any of these lights turns on and stay ON once you start to drive the car it means there is a problem with one of the following systems or related sensors. Step 1: Ensure that the main battery on your Mercedes-Benz is holding a proper charge.
ABS w/ ASR Module: Code 30 – – CAN bus to EA/CC/ISC faulty. LH-SFI Module: No codes. DI Modules: No codes. I removed all of the modules in the F23 box, removed the box frame itself, and inspected all of the wiring to the connectors especially to slots 4/5 (ABS w/ ASR) and 6/7 (EA). All wiring was ‘solid’. Using an ohmmeter, the CAN bus was checked.