Where do I find the shift lock release?
You will find this on the shifter console that is by the shifter lever. Typically, you will find a small plastic covering over the slot. Remove the cap. Get a key, small screwdriver, nail file, or any object with a similar shape. Insert it into the override slot, then push it down and hold it in place.
What to do when your shifter is stuck?
Follow these 6 steps to release a stuck shifter 1 Set the emergency brake. 2 Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3 Locate the shift lock override slot located on the shifter console near the shifter lever.
What happens when you replace the shifter solenoid?
READ THIS Before Replacing the Shifter Interlock Solenoid: In some instances the shift interlock solenoid can malfunction when a beverage or other sticky liquid is spilled and leaks down through the shifter console and onto the solenoid or locking mechanism.
How to move the shifter out of the park?
To be able to move the shifter out of the Park position, the key must be inserted in the ignition switch. Moreover, the switch should be on the Run or On position.
How can I override the shift lever in my Jeep?
Firmly apply the parking brake. 2. Turn the engine OFF. 3. Remove the rubber liner from the cupholder (located next to the shifter on the center console). 4. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6.
What to do if shift lever cannot be moved?
If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: 1. Firmly apply the parking brake. 2. Turn the engine OFF. 3. Remove the rubber liner from the cupholder (located next to the shifter on the center console). 4.
Where is the shift lever override access cover?
Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6. Using the screwdriver or similar tool, press and hold the shift lock lever down. 7. Move the shift lever to the NEUTRAL position. 8.
You will find this on the shifter console that is by the shifter lever. Typically, you will find a small plastic covering over the slot. Remove the cap. Get a key, small screwdriver, nail file, or any object with a similar shape. Insert it into the override slot, then push it down and hold it in place.
What to do when your gear selector is not shifting?
Follow these simple steps to use shift lock release when the gear selector isn’t shifting. Remove the key from ignition. Find the shifter lock override slot. This is usually close to the lever plugged with a plastic cap. Remove the plastic cap and push down the button inside the slot.
Why does the gear shift lever stick in Park?
Stuck Parking Brake. Another common problem that causes the gear shift lever to stick in park is related to the parking brake. If you park your vehicle on an incline and allow the vehicle to roll backwards before engaging the parking brake, the parking brake may get stuck.
What to do when your shift lock is stuck?
It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever. Normally, the slot is plugged with a small plastic cap. Remove the cap. 4) Insert a small screwdriver, nail file, key or similarly shaped object into the override slot, push down and hold.
What to do if your shift interlock is out of adjustment?
If shift interlock system is out of adjustment, check park lock cable adjustment. See PARK LOCK CABLE. If adjustment is not possible, replace necessary components. Some models require that park lock cable and shift interlock solenoid be replaced as an assembly.
Where is the shift interlock solenoid located?
Shift interlock solenoid is located near steering column or center console. OPERATION Models with park lock cable, gearshift lever is locked in Park when ignition switch is in LOCK position. When ignition switch is turned to RUN position, gearshift lever is allowed movement to desired position.
Can a manual transmission car have a shift lock release?
Those cars which run on manual transmission also have a clutch which the driver needs to push each time to shift the gear. The number of gears depends on the size of the engine. A manual transmission car, however, doesn’t have the shift lock release mechanism. Automatic transmission has it.