Where is the 10 Amp Fuse on a Dodge fan?

Where is the 10 Amp Fuse on a Dodge fan?

The Dodge owner’s manual contradicts this and shows no 10 amp fuse for the purpose of a blower relay, inside the junction box. Checked the blower with direct power and it works. Checked for incoming resistance ground to the blower, from the dash control switch and it works. Checked for battery at the blower, when the car is running.

Where are the fuses on a Mercedes Benz W204?

Testing fuses in place with a multimeter. Use the Mercedes fuse allocation chart to locate a specific fuse and amperage. For instance, the reading lamps are on fuse #17, rated at 30 amps and located in the under hood box. Figure 6. W204 fuse allocation chart (page 1). Figure 7. W204 fuse allocation chart (page 2). Figure 8.

What to do when your AC Fan is not working?

Checked for incoming resistance ground to the blower, from the dash control switch and it works. Checked for battery at the blower, when the car is running. There is no battery to operate the blower. Rotated all the PDC relays around, they have the same ID, other than ABS pump.

What happens when a car fan is not working?

That means a trickle out of your vents instead of the rush you asked for. When it does happen, you’re left with a miserably underpowered heat or AC system. It will still work with no fan, and you’ll usually still be able to control the temperature of the air that is blowing or trickling, out.

Where is the blower fuse on a Dodge PDC?

Haynes say it is located in the PDC under the Hood, along with a 40 amp blower fuse in the PDC. Dodge owners manual shows the 40 amp blower fuse, #25, but does not mention any blower relay in the PDC. All the relays in the PDC have designated legends on the cover, but none indicate they are for the front blower relay.

Where are the fuses on a radiator fan?

Have you checked the fuses in the black box on top of the battery. Those steel like fuses. Fuse 16 on the side of the dashboard. When opening the cover it will be the 2nd fuse from the top left. https://knigaproavto.ru/shemy/en/volkswa…

How to troubleshoot an electric cooling fan problem?

1.Has the Cooling Fan Actually Failed? 1 If the fan comes on when the AC is running at MAX, but doesn’t run when the engine is hot, check the temperature sensor… 2 If the fan fails to come on, first check for a fan blown fuse or triggered breaker. On older vehicle models, you may… More

What should I do if my car fan won’t turn on?

On modern vehicles, a bad sensor usually triggers the check engine light. Scan the computer for trouble codes, if necessary. If the fan fails to come on, first check for a fan blown fuse or triggered breaker. On older vehicle models, you may have a fusible link in the circuit.

Can a bad fan motor cause a breaker to blow?

CAUTION: If the fan fuse or fusible link is blown, or the breaker has been triggered, it is possible the fan motor itself may be bad and causing the fuses to blow. Replace the fuse or fusible link, or reset the breaker, and test the fan motor again. If the same problem appears and there’s no wire causing a short circuit, replace the fan motor.

What does it mean when a breaker or Fuse goes off?

So a breaker or fuse going off is often a sign that something else is wrong: a symptom, not a cause of your problem. The problem may be easy to fix or it may not be. Many appliances have sensors on their mechanical parts that will kick a breaker or blow a fuse rather than allow the appliance to continue running in an unsafe mode.

The Dodge owner’s manual contradicts this and shows no 10 amp fuse for the purpose of a blower relay, inside the junction box. Checked the blower with direct power and it works. Checked for incoming resistance ground to the blower, from the dash control switch and it works. Checked for battery at the blower, when the car is running.

Haynes say it is located in the PDC under the Hood, along with a 40 amp blower fuse in the PDC. Dodge owners manual shows the 40 amp blower fuse, #25, but does not mention any blower relay in the PDC. All the relays in the PDC have designated legends on the cover, but none indicate they are for the front blower relay.

What should I do if my car fan is not working?

Blower still does not work. Checked continuity of 40 amp blower fuse; it’s okay. Checked most fuses for continuity in the PDC and Junction Box and they are okay. Note, there is no burnt or corroded wiring.

Why does my Fuse for the radiator fan keep blowing?

BUT, if there is a short circuit before the fan, it will blow the fuse. Check the wiring is not chaffed or worn between fuse box and fan, or switch to fan. Unplug the radiator fan, replace the fuse and see if it blows again. If not, then its likely the radiator fan is shorted. Use an ohm meter and see what the resistance is.

Posted In Q&A