What causes a Mercedes Benz key to not turn in?
Issues with the key can result in Mercedes Benz ignition key problems. There are three possible reasons why your key does not turn in on ignition, one of which is a bent key. Keys do get bent at times and a bent key inserted in the ignition cylinder will not line up as it should that allows the car to start.
What to do if your car key won’t start?
However, before you assume that there is a problem with the car’s engine or even the starter, you might consider that the key you use to start your car could be at fault.
Why is my Mercedes Benz ignition not working?
Another common Mercedes Benz ignition key problem is that the key might turn in ignition but the car won’t start. This problem can be caused by a faulty ignition lock cylinder. Ignition lock cylinders can develop wear and tear too and if it does, it might not function correctly when you try to start your vehicle.
What should I do if my Mercedes Benz won’t start?
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.
Why is my car key not working on my Mercedes?
It could be the car battery. If the car battery is dead, the key’s remote won’t be able to communicate wirelessly with the car at all. And to avoid the risk of damaging the electronics on your Mercedes, have the battery tested by a professional. You can unlock your car, but the key won’t turn or start the engine.
How do you start a Mercedes Benz key fob?
Turn the KEYLESS-GO key in the ignition to start the engine. Release the key as soon as the engine cranks. Make sure to save the Engine Start/Stop button so that you can reinsert it once you change the battery in your Mercedes key fob.
What does it mean when your car won’t start when you turn the key?
If you hear a clicking sound, this often means the electrical components are not working. However, if there is no sound at all, and especially if you see the dashboard lights or dials come on when you turn the key, this often means the engine simply won’t even try to start since it’s not getting that needed signal from the key.
Another common Mercedes Benz ignition key problem is that the key might turn in ignition but the car won’t start. This problem can be caused by a faulty ignition lock cylinder. Ignition lock cylinders can develop wear and tear too and if it does, it might not function correctly when you try to start your vehicle.
What happens if you don’t turn the ignition key?
Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler.
Where is the ignition key on a Mercedes Benz?
There are 4 electronic and/or mechanical modules that are synchronized for everything to work ok: 1. The key (electronic key); 2. The electronic ignition switch (eis, the place where you put your key in); 3. steering locker; 4 the central electronic circuit module.
What to do if your Mercedes key won’t turn?
If you have this problem you will have to install a new / virgin EIS. You can not install a used unit because the EIS has to be paired / married to the car using Mercedes-Benz Star Diagnostic Software. They key itself may be the reason why the car doesn’t start. The key may open the doors, but it will not start the car.
What does it mean when your ignition key won’t turn?
The key (electronic key); 2. The electronic ignition switch (eis, the place where you put your key in); 3. steering locker; 4 the central electronic circuit module. If only one of them has a problem, the key will refuse to turn.
There are 4 electronic and/or mechanical modules that are synchronized for everything to work ok: 1. The key (electronic key); 2. The electronic ignition switch (eis, the place where you put your key in); 3. steering locker; 4 the central electronic circuit module.
Why is my ignition not working on my Mercedes Benz?
It is possible that the battery in the car is defective, as it does not provide the necessary voltage for the ECU and the N73 Electronic Ignition/Starter Switch (EIS) to function properly. If the battery is dead or has low voltage / under voltage, the CAN communication between EIS and N72 may not function properly.
Why does the key not turn when inserted in the ignition?
The EIS module could also be the reason that the key does not turn when inserted in the ignition. Many car owners complain that the car starts fine on a warm or hot day but in cold days the car will not start. This may sound strange, but it is reported frequently.
Why is my Mercedes EZs EIS ignition not working?
The only issue here is that if you can’t turn on the ignition, you can’t power on the OBD2 port and the iCarsoft MB II scanner. If the ignition turns on intermittently, consider yourself lucky and scan for codes. Hopefully, there are fault codes that will point you to the problem. Diagnosing Mercedes ignition problems isn’t a simple DIY job.
What causes a Mercedes Benz ignition to not turn?
Mercedes EZS EIS Ignition Switch Problem, Cause, Solution. A problem that Mercedes-Benz owners may face is the key no longer turns in the ignition. This issue is often caused either by a defective key, bad shifter module, a failed Electronic Ignition Switch (EIS) also known as the EIS-EZS or a bad steering lock module (ESL).
What causes a Mercedes Benz key to not turn?
List of common problems and possible solutions 1 Locked Steering Wheel. New drivers always experience this at least once, so we thought we would include it in this list. 2 Discharged Battery Undervoltage. 3 Key Tumbler Defective. 4 Defective Electronic Ignition/Switch System EIS / N73. 5 Smart Key Remote.
What to do if the key does not turn in the ignition?
If the key does not turn in the ignition, try moving the steering wheel as you try to turn the key. The steering wheel will feel completely solid if you try to move it in one direction and may move slightly in the opposite direction.
Why did my Mercedes EIS ignition switch fail?
Mercedes-Benz ignition switch (often referred as immobilizer module) can become faulty and in some cases due to user error. For example, some common reasons why the ignition module failed are: Connecting jump starting cables while key is in the ignition. During any of the above scenarios, the EIS-EZS may lose its memory.