How do you replace the fuel filter on a Mercedes Benz?
Begin by opening the fuel filler door and removing the gas cap. This will help relieve pressure in the system. You will need to disconnect the fuel lines from the pump to replace the filter. In our project car so you need to access both the filter and pump.
Where is the fuel filter located in a car?
The fuel filter on the gasoline powered cars is located inside the fuel tank. Yes, it seems crazy, but it’s part of a new system that puts everything in the tank, pump, filter, regulator, pressure sensor, etc. There is a single line coming from the back at the tank to the front that hooks up to the fuel rail.
Are there different fuel filters for the W204?
There are a host of different fuel filters for the W204, and all of them are VIN specific. If you are going to replace yours, please make sure to have your VIN handy when ordering because your vehicle will not run with the wrong filter installed.
What’s the best way to replace a fuel filter?
It is best to replace your fuel filter with the fuel tank drained. This reduces the amount of possible spilled fuel and fuel vapors. Wear proper clothing, gloves and safety glasses when working with gas. When replacing, work in a well-ventilated area. Working outdoors is a good choice.
Begin by opening the fuel filler door and removing the gas cap. This will help relieve pressure in the system. You will need to disconnect the fuel lines from the pump to replace the filter. In our project car so you need to access both the filter and pump.
Can a faulty fuel filter cause poor engine performance?
A clogged and faulty fuel filter can cause poor engine performance. When they get completely clogged you may be left with an engine that doesn’t run at all. If you are getting an error code for the pump make sure to replace it right away before it leaves you stranded on the side of the road.
There are a host of different fuel filters for the W204, and all of them are VIN specific. If you are going to replace yours, please make sure to have your VIN handy when ordering because your vehicle will not run with the wrong filter installed.
It is best to replace your fuel filter with the fuel tank drained. This reduces the amount of possible spilled fuel and fuel vapors. Wear proper clothing, gloves and safety glasses when working with gas. When replacing, work in a well-ventilated area. Working outdoors is a good choice.
A clogged and faulty fuel filter can cause poor engine performance. When they get completely clogged you may be left with an engine that doesn’t run at all. If you are getting an error code for the pump make sure to replace it right away before it leaves you stranded on the side of the road.
Where is the oil filter located in a project car?
In our project car so you need to access both the filter and pump. Both are located under the rear seat with the pump on the right side (red arrow) and the filter on the left (yellow arrow). You need to remove the rear seat so please see our article on seat removal for additional assistance.
In our project car so you need to access both the filter and pump. Both are located under the rear seat with the pump on the right side (red arrow) and the filter on the left (yellow arrow). You need to remove the rear seat so please see our article on seat removal for additional assistance.