What does a stuck brake caliper mean for a GMC Sierra?
Whether you’re descending a mountainside or stuck in rush hour traffic, a stuck GMC Sierra 1500 brake caliper means you are constantly adding stress to the braking system. Stop excessively replacing brake pads and invest in a new brake caliber for GMC Sierra 1500 pickups.
Why are my brake pads sticking on my GMC Sierra?
There are notches in your Sierra’s brake pads that let them slide back and forth from the rotor as the brakes are pressed. If something gets into these slides, the pads may not disengage from the rotor all the way. This problem is often caused by bad shims or junk getting in the way.
What do I need to replace my Silverado caliper?
1. With the caliper came a few replacement parts. Inside were two bolts or slide pins as I believe they are called, a washer for the brake line, two rubber boots for the mounting bracket and two black rubber tubes that are about 2 inches long or slightly smaller. My uncle performed this work, I watched, helped and learned.
Why is my caliper sticking on my Silverado?
If you cannot slide the pins easily in and out of the bracket, you have a problem with the bracket. This is a 10-15 minute job per wheel, so just do it asap. I don’t think your hoses are the problem. It is that hard rubber tubing that you forced onto the pins.
Whether you’re descending a mountainside or stuck in rush hour traffic, a stuck GMC Sierra 1500 brake caliper means you are constantly adding stress to the braking system. Stop excessively replacing brake pads and invest in a new brake caliber for GMC Sierra 1500 pickups.
There are notches in your Sierra’s brake pads that let them slide back and forth from the rotor as the brakes are pressed. If something gets into these slides, the pads may not disengage from the rotor all the way. This problem is often caused by bad shims or junk getting in the way.
1. With the caliper came a few replacement parts. Inside were two bolts or slide pins as I believe they are called, a washer for the brake line, two rubber boots for the mounting bracket and two black rubber tubes that are about 2 inches long or slightly smaller. My uncle performed this work, I watched, helped and learned.
Where are the brake caliper guide pins located?
To fix this, you have to remove the brake pads and clean the brake pad bracket with a file or sandpaper and lubricate it with copper paste or something similar. The brake caliper guide pins are located at the brake caliper bracket and help the caliper to slide forward and backward when you are braking.