Is there a problem with the airbag control module?
Wiring or Harness around the airbag control module shouldn’t be severed or damaged anywhere (not very common… but a possibility) Finally – If all these common problem areas all check out fine, then the final possibility to consider is that the airbag module is internally faulty / fried.
Where are the communication pins on an airbag module?
Communication Pins at plug – Inspect the communication pins where the harness plugs into the front of the module. Look for signs for corrosion or damage. Those pins sometimes can become bent, pushed back in or even broken off.
What to do if your airbag has no communication?
Communication Pins at plug – Inspect the communication pins where the harness plugs into the front of the module. Look for signs for corrosion or damage. Those pins sometimes can become bent, pushed back in or even broken off. Module is improperly grounded – A simple but overlooked problem.
Wiring or Harness around the airbag control module shouldn’t be severed or damaged anywhere (not very common… but a possibility) Finally – If all these common problem areas all check out fine, then the final possibility to consider is that the airbag module is internally faulty / fried.
Communication Pins at plug – Inspect the communication pins where the harness plugs into the front of the module. Look for signs for corrosion or damage. Those pins sometimes can become bent, pushed back in or even broken off. Module is improperly grounded – A simple but overlooked problem.
Communication Pins at plug – Inspect the communication pins where the harness plugs into the front of the module. Look for signs for corrosion or damage. Those pins sometimes can become bent, pushed back in or even broken off.
Why do I need to reset my Honda airbag module?
Even after a minor accident the airbag may not deploy but the seat belts will lock and airbag module will need to be reset because of crash data and crash codes that are stored in the airbag module. MyAirbags will reset your airbag control module back to its original manufacturer state clear of all codes, both soft and hard codes.
Can a Mercedes airbag be reset by myairbags?
The best part of having your Mercedes original airbag module reset by MyAirbags is that when you get your airbag control module back and it goes back into the same vehicle that it came out of then it will be plug-n-play. No additional programming of the VIN is required.
What is the cause of a Mercedes airbag fault?
The cause is the cable routing under the passenger seat. The wire was dressed from the factory such that the cabling to the connector was under tension. Res. of Ign. Circuit containing R12-1 (Drivers ETR Ign. Squib too low). Component of control module WSS is faulty.
Do you clear trouble codes before resetting airbag light?
Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.
What causes the airbag to deploy in the passenger seat?
The passenger seat has an occupancy sensor that, when malfunctioning, can lead to the rapid deployment of the airbag. Fixing the sensor will solve this problem. The other problem could be with the clocking system. The system controls the car horn and steering wheel deployment.
Where is the button to turn off the airbag light?
This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.
Do you need scanner to read airbag trouble codes?
Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.
When is a ride control module is failing?
If it seems like your vehicle is picking up every bump, or the ride is not as smooth as it was, the ride control module may be failing. Since it controls the air suspension system, it may not be sending the correct information so the air suspension system will not be able to respond appropriately.
What was the problem with my Pontiac Sunfire?
This 2000 Pontiac Sunfire had multiple dash problems. among which were most warning lights on, erratic gauge operation,the odometer read the word Error and sometimes the engine would not start. My first thought was a faulty instrument cluster because that was where all of the problems were centered.
What are the symptoms of an ECM failure?
Nowadays, those functions are controlled by three computers: Transmission control module (TCM). Today, we’re going to take a look at the most common signs of ECM failure. These ECM failure symptoms can be your first warning of serious engine trouble, so it’s important not to take them lightly.
Why does my ECM keep failing to ignite?
A rich fuel-to-air ratio can cause your engine to misfire, while a lean ratio can cause stuttering when it periodically fails to ignite. Similar problems can be caused directly by an improperly-adjusted engine timing. Either way, it’s possible that your ECM is causing the problem.
How does my airbag module reset and return work?
MyAirbags is committed to helping you reset your airbag module and seat belts. We provide a reset and return service to reset airbag control modules. This service requires you to remove and send your module to us for reset. When we receive your airbag module, we reset ALL fault codes.
Why does my ECM say fuel to air?
Your engine is never as finicky about fuel-to-air ratio as it is when it’s first starting up. If your ECM is setting the ratio incorrectly, this is the first time you’ll notice.
What should I do if my airbag warning light is not working?
You’ll need to reset the airbag light in this case. There’s no quick and easy way to troubleshoot the problem of an airbag warning light. Much like the Check Engine light, it should not be ignored and needs to be looked at by a professional. In this case the mechanic will run a diagnostic on the airbag ECU, or electronic control unit.