Why are my low beams not working on my Mercedes?

When it burns out it will stop suppling power to whatever lights it wants to. Multimeter the socket, no power replace the relay/check fuses of course. Suggest junk yard new they are about 200. The headlights on my 88 260E would turn OFF when I switched from high beams to low beams. Very unsettling the first time it happened.

When to change the low beam light bulb?

To change the low beam light bulb on your Mercedes-Benz C-Class W204 model years 2008-2015 you will need a replacement light bulb. Owners of Mercedes-Benz C300, C350, C63 will find this guide helpful. This only applies to models that have halogen bulbs and not to the models with HID D2S head lights.

Why is my headlight low beam going out?

It is when the circuit is completed by plugging in the bulb it looses power. In the fuse panel, I did switch the hi/lo rely with another from the panel and still have the same results. I am able to jump it and get the bulb to come on.

How to replace low beam headlight bulb on Mercedes Benz?

Step 2 – Remove the plastic cap from the back of the headlight. Twist it counter-clockwise to remove it. Step 3 – Twist and remove the old light bulb. Step 4 – Disconnect the electrical connector from the old bulb. Step 5 – Install the new light bulb. Avoid touching the glass part of the light bulb with your fingers.

Can you drive with only high beams on?

Not practical to drive at night with just high beams. The closest dealer is 90 miles away. Both low beams went out at night on the road. I discovered later that the high beams work. I checked fuses. No problem. I bought and installed bulbs in each light one at a time and tried the lights. Low beams still out, but high beams work.

Is the low beam still working but high beams are not?

Low beams still out, but high beams work. Based on questions on line, this seems to be a problem that happens with Mercedes. What do I check next to correct the problem?

Why are my low beams not working on my 88 260E?

Suggest junk yard new they are about 200. The headlights on my 88 260E would turn OFF when I switched from high beams to low beams. Very unsettling the first time it happened. If I fiddled with the beam change lever the lows would come on so I knew the problem was the steering column switch. I bought a new one and all ws well again.

Low beams still out, but high beams work. Based on questions on line, this seems to be a problem that happens with Mercedes. What do I check next to correct the problem?

What to do when your low beam headlight blows out?

You can often tell when a headlight blows out while you’re driving, but confirm which bulb has actually blown out by leaving your headlights on and getting out of the vehicle to check. Then get back in your vehicle and turn on your high beams. Some vehicles use a single bulb for both high and low beams while others do not.

What to do if your low beam headlamp is defective?

The left or right-hand low-beam headlamp is defective. Check whether you are permitted to change the bulb yourself (). Visit a qualified specialist workshop. The left or right-hand trailer tail lamp is faulty. Check whether you are permitted to change the bulb yourself.

What to do if your Mercedes GLK headlamp is defective?

The left or right-hand cornering light is defective. Check whether you are permitted to change the bulb yourself (). Visit a qualified specialist workshop. The left or right-hand low-beam headlamp is defective. Check whether you are permitted to change the bulb yourself ().

Why are the lights not working on my Mercedes?

Lights not working – We have seen many Mercedes-Benz where one or a few lights don’t work. It can be that the left or right low beams, fog lights or turn signals may not work. You should always avoid splicing wires to get power for aftermarket HID lights, alarm or connecting a trailer hitch.

Why are my high beam headlights not working?

In the case of high-intensity discharge (HID) headlights, or Xenon headlights, there’s an additional component. To get the xenon and salts to plasma state, the HID generator bumps the voltage up to 30,000 V, then stabilizes around 90 V when the bulb is in operation. If the generator fails, the bulb won’t light.

What to do if your dash light bulb is not working?

#* If the bulb is not bad, carefully reinsert it, applying a small dab of light bulb grease on the metal base of the bulb. #*If you find more than one bulb that is bad then, it is recommended to replace all the bulbs as a set. Once they start failing, then it is likely all will fail soon. #Acquire a professional opinion.

Why are the low beams not working on my 96 Vito?

I had a similar problem on my 96 Vito with low beams on both sides not working when the lights where in the on position.

Why are my headlights not working in high beam?

If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.

What can cause a low beam headlight to be dim?

If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?

Why do high beams work but low beams don’t?

This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t. The normal headlights are on far more often than the high beams, so the low beams burn out more frequently. Some vehicles have entirely different bulbs for the high beams, and other models have headlights with two different filaments.

Can a broken headlight switch keep the high beams on?

Most headlight switches operate by pulling the lever backwards and locking it into place to activate the high beam headlights. Over time however the switch can break, which can lead to issues keeping the high beam headlights turned on. A broken switch may still be able to turn the high beams on,…

What is the color of a Mercedes 350sdl?

FINISHED IN BLACK PEARL METALLIC COLOR CODE #199, AND GRAY FULL LEATHER UPHOLSTERY. THIS S CLASS WAS ALWAYS OWNED BY THE SAME OWNER. UNTIL SOLD TO US A MONTH AGO. I HAD PLANNED TO KEEP THIS CAR IN MY COLLECTION BUT HAVE ABSOLUTELY NO SPACE. ALWAYS GARAGED, AND ALWAYS SERVICED AT THE SAME MERCEDES DEALER WHERE IT WAS PURCHASED.

When to use high beam headlights in California?

The California driver’s handbook also recommends using headlights on country roads or up in the mountains even on sunny days to make it easy for other drivers to see you. High Beams High beams must be dimmed when approaching traffic is within 500 feet.

When do headlights have to be dimmed in front of a car?

Headlights must display either a white or amber light, which is visible at least 1000 feet in front of the vehicle. High beams must be dimmed when approaching traffic is within 500 feet. High beams must also be dimmed when following within 300 feet of another vehicle.

Are there any common problems with a 2004 SL500?

I’m actively shopping for about a 2004 SL500, and I couldn’t find a “buyer’s guide” or “common problems” kind of post here. For what I’ve read I wouldn’t touch one without a warranty, but are there specific common problems to look out for? Thanks for any advice, and hope to join you regularly soon!

What to do if your Mercedes SL500 breaks?

Lubricating the seals can usually cure the problem; in most cases, the seals do not need replacement. Suspension & Steering • Front thrust arm and control arm bushings can crack and sometimes tear completely.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

What to do if the fuses on your SL500 blow out?

Electrical components such as your map light, radio, heated seats, high beams, power windows all have fuses and if they suddenly stop working, chances are you have a fuse that has blown out. If your SL500 is experiencing electrical problems, you should always check the fuses first, because they are relatively easy to check and cheap to change.

Where are the fuses on a 1998 Mercedes SL500?

Interior Fuse Box Location: 1990-2002 Mercedes-Benz SL500 – 1998 Mercedes-Benz SL500 5.0L V8 Electrical components such as lights, heated seats and radios all have fuses in your 1998 Mercedes-Benz SL500 5.0L V8. This free video shows you how to replace a blown interior fuse on a 1998 Mercedes-Benz SL500 5.0L V8

Are there any problems with Mercedes Benz headlights?

Mercedes Benz OEM Xenon Headlight Problems HID Ballast Bulbs Ignition Part Replacement

When did the lights go out on my Mercedes?

Mercedes Class A150 Reg 2009. All my lights went out on a recent short drive in early dark morning. Car was left standing for about 14 hours. Lights came back on, on starting. Then, after about 5 minutes travelling they went out again.

Why do the headlights work when the lights are off?

When the lights where off and the engine was running the low beams worked because of the secondary relay that powers the lows beam automatically when engine is running (this was a requirement in my country, low beams turning on automatically when engine starts).

How to replace a low beam headlight bulb?

Locate the back of the headlight. Remove the plastic cover from the back of the headlight assembly. Press the two plastic tabs together to remove the headlamp cover. Remove the electrical connector from the low beam halogen type light bulb. Remove the light bulb from the socket.

How do you replace a halogen headlight?

Remove the plastic cover from the back of the headlight assembly. Press the two plastic tabs together to remove the headlamp cover. Remove the electrical connector from the low beam halogen type light bulb. Remove the light bulb from the socket. Install the new socket. Make sure it sits in the recess.

Is it possible to fix a bad low beam headlight?

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

Can a Mercedes auto lamp be turned on automatically?

In fact, your lights will work fine when turned on manually, but they will not turn on automatically. Also if you enter a tunnel, your lights won’t turn on. You will have to turn the lights on using the light switch. If it starts to rain, don’t expect the wipers to start working automatically. Use the wiper switch to turn on the wipers.

Do you need to replace both high and low beams?

Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.

Why is my E350 low beam not working?

E350: Drivers side Low beam not working. Replaced headlight… Hi there I recently replaced the headlight assemblies and bulbs because the headlights were not functioning. (also pretty fogged up). Now just … read more associates in automotive te…

Why is my right low beam headlight not working?

My right low beam headlight is not working on my 2004 SL500. I replaced the low beam bulb (both sides) but this did not fix the problem. I switched the bulbs to make sure I didn’t do anything wrong, t … read more

Why is my SL500 pass side low beam not working?

00mercedes sl500 pass side low beam don’t work. Charge bulb 00mercedes sl500 pass side low beam don’t work. Charge bulb 3 times hid. Change ballast check fuse all good. Any clues … read more Per 2004 SL500: Right side high beam does not light up. Is Per 2004 SL500: Right side high beam does not light up.

Is the right low beam on my C63 AMG working?

I have a 2014 C63 AMG and the right low beam is out all other lights in the assemble work as well as the everything on the left side is working. I … read more

How big is a Mercedes Benz parking light bulb?

B-CLASS B-CLASS 2000-2011 2012-Present Low beam headlamp H7-55W H7-55W High beam headlamp H7-55W H7-55W Parking light 194 or 168 or 12961 194 or 168 or 12961 Front turn signal 7507 Amber or PY21W 7507 Amber or PY21W

What are the different types of Mercedes Benz light bulbs?

Mercedes Benz Light Bulb Look Up Sizes and Types 1 B-CLASS 2 C-CLASS 3 CL-CLASS 4 CLA-Class 5 CLK-CLASS 6 CLS-CLASS 7 E-CLASS 8 G-CLASS 9 GL-CLASS 10 GLA-Class

Are there any problems with the W212 E class?

The W212 design not only looks solid, but the also feels very stable while driving. Air suspension problems – in models such as the E550, components could fail including the air compressor and the rear air suspension springs. Cabin rattling sounds caused by loose interior trim parts may start developing over 100k miles.

What to look for in a Mercedes Benz W212?

Raise your vehicle and observe the entire exhaust for holes or loose connections in the pipes. Also, check for corrosion, cracks, or loose bolts. If you hear the rattle when at a stop or even a whistling noise, the catalytic converter may be damaged or clogged.

When did the Mercedes-Benz E-Class W212 come out?

This article applies to the Mercedes-Benz E-Class w212 (2009-Present). If you ask any Mercedes-Benz E-Class owner to list the problems that have arisen in their vehicle, in all likelihood the list will be very short.

Why does my Mercedes Benz make noise when I change lanes?

Drive at a moderate and constant speed while you constantly steer the car left and right, as if you are changing lanes. If the noise changes in pitch and returns to normal when the car is driven in a straight line, the wheels bearings might be worn. If there is no change in pitch and the noise remains constant, the tires might need to be replaced.

Are there any problems with the Mercedes c250?

Granted, that was the only case reported of a fire, but given the other engine problems, it makes one a little leery of the 2012 C250. Other problems plaguing the 2012 C250 include peeling paint and rattling noises. Is the Mercedes-Benz C250 actually worth it?

Why are the low beams not fused on my 2002 ML?

On the 2002 ML’s, the low beams are not fused. They receive direct voltage from the Combination Sw. to the AAM, to the EAM and then to the low beams. Hopefully the problem will be with the Combo. Sw.

What to do if your low beam light does not work?

Remove the covers surrounding the steering column and access the electrical connector to the combo. switch. With the switch in the Low Beam mode, test wires #2 BLUE and #3 ORANGE, with a test light or DVOM, for 12v. If there is not 12v, replace the Combination Switch. If there is 12v, replace the covers on the steering column and post back.

What did Edmunds say about the 2003 Mercedes CLK Class?

Edmunds’ expert review of the Used 2003 Mercedes-Benz CLK-Class provides the latest look at trim-level features and specs, performance, safety, and comfort. At Edmunds we drive every car we review, performing road tests and competitor comparisons to help you find your perfect car.

How to replace the headlight on a Mercedes Benz E320?

To remove the Xenon ballast (blue arrow), remove the three T25 Torx fasteners (red arrows). To remove the Xenon headlight module (green arrow), remove the three T20 Torx fasteners (red arrows). When removing the Xenon module, inspect the module for corrosion. If needed, replace the module as well as the headlight.

What kind of headlights do Mercedes Benz use?

Click here to order! Mercedes-Benz W211 vehicles with optional high intensity discharge (HID) or xenon headlights utilize a special high voltage bulb and control unit for low beam headlights. Conventional halogen bulbs are used for high beams.

Where is the high beam bulb on a Mercedes Benz?

The yellow arrow points to the turn signal / parking bulb electrical connector (you will not disconnect this when replacing the bulb). The blue arrow points to the high beam bulb electrical connector. The red arrow points to the front driving light bulb electrical connector (this bulb illuminates the high beam capsule).

Why do BMWs have low and high beams?

BMW Headlight Low and High beam Malfunction Explained!! – Xenons4U Automotive Blogs For BMW drivers, the car’s low and high beams are not just a useful feature, they are a legal necessity to make driving in the dark and in severe weather safe.

Why does MY BMW headlight fog up when high beam is on?

Headlight fogging is caused when polycarbonate is exposed to ultraviolet light and exhaust emissions, as a chemical reaction occurs which causes the headlights to fog up. With headlight fogging, the light released from the headlight is hard to see even when both the high and low beams are switched on. How can these problems be resolved?

What causes a BMW headlight to go low or high?

Any brand bulbs for example Philips, GE, Osram, Neolux, Narva, Hella etc. could be fitted just make sure you are buying correct fitting (socket) bulbs. Another the most common xenon headlamp issue causing the low or high beam malfunction is faulty ballast also known as xenon light control unit.

What causes a headlight to stop working at the same time?

If two of your headlights have stopped working at the same time, it is much more likely that a fuse has blown than both the bulbs. If a bulb has been attached to the car with the wrong wattage or too much current is in the headlight circuit, the fuse will blow to protect the wiring from damage.

What to do if your high beam light is not working?

Check your owner’s manual to be sure which kind of high beam bulb you need and get familiar with the fuse box in case the high beams stop working. Finally, practice using a digital multimeter so you can rule out electrical problems before replacing other components. A blown high beam headlight bulb, an easy fix.

Where are the fuses on a Mercedes Benz E class?

Cigar lighter (power outlet) fuses in the Mercedes-Benz E-Class are the fuses #54a, 54b (cigar lighters) in the Engine Compartment Fuse Box, and fuse #13 (Interior socket) in the Luggage Compartment Fuse Box. The fuse box is located on the driver’s side of the instrument panel, behind the cover.

How to fix Mercedes Benz Xenon headlight problems?

Mercedes Benz Factory Original Xenon Bi-Xenon Headlights OEM HID Ballast Bulb Igniter Gas Discharge Ring Control Unit Parts.If you Mercedes Benz MB Low beam Xenon headlights have Problem,flickering or light not working can find us replacement the oem xenon parts.Professional supplied by www.oemxenonshop.com Acura Alfa Romeo

What should the fuse look like on Mercedes Benz air suspension?

Procedures are similar for other Mercedes-Benz with air suspension, but the location of the relay and fuse may change. In this S-Class W220, the air compressor motor /pump is protected by Fuse 32, which is a MaxiFuse 40 Amp. Here is what a good fuse should look like.

Where to buy a low beam headlight bulb for a Mercedes Benz E350?

If you prefer to shop in person for the right Low Beam Headlight Bulb products for your E350, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time! Use the fitment form at the top of the page to select your exact year and engine type for your Mercedes-Benz E350.

What kind of engine does the Mercedes E500 have?

Overview Overview E500 Rwd 4dr Sedan 5.0L 8cyl 7A E55 AMG Engine Type Gas Transmission 7-speed shiftable automatic Drive Type Rear wheel drive Cylinders V8

Why is my left headlight not working on high beam?

Your left and right lights are powered by separate power circuits to keep from overheating the wiring and from having both lights from failing if one circuit fails. If only your left headlight is not working then try to turn on the high beam and see if both headlights work on high beam.

Are there any low beams on my 2002 ML320?

My recently purchased 2002 ML320. One of the PPI (Pre-Purchase Inspection) comments was that the low beams are not working. I thought it would be the bulbs…..nope!

What kind of headlamps does a Mercedes G55 have?

I have a 2005 Mercedes G55 AMG. I installed 7″ Round LED Headlamps (Manufactured by Truck-Lite). I installed both lights the same way, … read more I have a 2001 C 240 Mercedes Benz and I installed a HD xenon bulb w/ 2 ballast for both sides L & R low beam and I get a flashing lights and a warning malfunction on the cluster sign.

What to do if your Mercedes Sam unit is defective?

In cases when the SAM unit is defective you may see several problems that at first don’t seem related. Just replacing your Mercedes SAM unit is more cost effective than opening it up to narrow it down and fix your existing unit. Next to confirm that the SAM unit is defective you should read the fault codes.

Where is the SAM module located in a Mercedes Benz?

The location of the SAM module depends on the Mercedes-Benz chassis. Most SAM modules are usually installed by the fuse box. Mercedes-Benz cars may have a rear and front SAM module. Left SAM in located in engine compartment.

Over time however the switch can break, which can lead to issues keeping the high beam headlights turned on. A broken switch may still be able to turn the high beams on, however a faulty switch may pop loose and cause the high beams to disengage.

Why are my low beam headlight bulbs not working?

If the bulb doesn’t fit properly in the socket, the light beam will not project correctly. You can verify this by turning on the light and looking at the headlights from 20 feet away. Both headlights should be the same brightness. Applicable Models: S430 S500 S55 CL500 CL600 Chassis: W220 W215 Years: 1998 1999 2000 2001 2002 2003 2004 2005 2006

What’s the name of the Mercedes Benz parking light?

Parking light. P21/5W. Front turn signal. P21/5W. Rear turn signal. P21W. Tail light. 5007 or 12821 or R5W. Tail light.

How to replace a light bulb in a Mercedes Benz?

Light bulb replacement guide for Mercedes-Benz cars. Look up your Model on the first column then move over to the right and click on the year or chassis type. If there is something we don’t have on this page check out Philips website here.

What to do when your Mercedes goes into limp mode?

You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.

Navigation