How can I Fix my Mercedes seat belt?
Remove the bolts that hold the retractor in place. Remove the bolt for the bracket at the top of the b pillar. Remove your seat belt retractor. Mail your retractor for repair to the company of your choice. If you don’t know of one, check out these vendors that offer: Mercedes Seat Belt Pretensioner Rebuild
How do you remove the front drivers seat on a Mercedes?
DIY on removing Mercedes Front Drivers seat, this job is rather simple and is the same for all W210’s and many other models. Ensure that you do not disconnect the battery however until after you have taken the four bolts off holding the seat down. You don’t want your car to be without electricity and the seat positioned above the bolts.
What to do if your seat belt is locked?
There are two small tabs on the connector that you need to press before you can pull the connector. Otherwise, you will damage the connector if you force it out. Remove the bolts that hold the retractor in place. Remove the bolt for the bracket at the top of the b pillar. Remove your seat belt retractor.
Do you need to remove a seat belt retractor?
If you need to remove your seat belt retractor or pre-tensioner out of your vehicle, this video will show you how to do that step by step. If your car has been in an accident or a crash, we can repair your seat belts!
Can a seat belt be removed from a Mercedes?
You will need to remove the pre-tensioner from your Mercedes-Benz. Removing your pre-tensioner is very easy and straight forward process. Rember to disconnect the negative battery before you disconnect the pre-tensioner. For example, let’s look at how you can remove a seat belt retractor with a build in pre-tensioner.
How to remove the front seat in a Mercedes Benz?
Front Seats: Once the seat belt, fasteners and trim are removed from your seat, move the seat all the way rearward to expose the seat module electrical connector and front mounting bolts. Remove the two E12 Torx bolts from the front rails (red arrows).
How do you remove a seat belt retractor?
Removing your pre-tensioner is very easy and straight forward process. Rember to disconnect the negative battery before you disconnect the pre-tensioner. For example, let’s look at how you can remove a seat belt retractor with a build in pre-tensioner. Remove the door trim and molding to expose the retractor.
Where are the bolts on the back of a Mercedes?
Slide the seat all the way forward to access the bolts to the back of the seat. The seat has four bolts that brace it to the floorboard. The bolts are located at each corner of the seat. Unscrew the back two bolts with a socket wrench. The seat will now need to be slid all the way back to access the front bolts.