How big is the brake bracket on a sprinter?
The rear brake caliper bracket on first-generation Sprinters has a torque specification of 66 ft/lbs for M12X1.5 bolt and 125 ft/lbs for M14X1.5 bolt. Caliper guide pin bolts have the following torque specs: the guide bolt is 19 ft/lbs for the M8 bolt, and 22 ft/lbs for the M10 bolt.
What does the brake warning light mean on a Mercedes Sprinter?
Have system checked as soon as possible. The Mercedes Sprinter Brake warning light is often associated with low brake fluid levels. For further information on the Mercedes Sprinter Brake warning light, other symbol combinations and possible meanings, see Mercedes Sprinter Brake warning light.
Do you have to change brake pads on sprinter?
The majority of Sprinters are used in the city, and noise and harshness are major considerations for the engineering of these pads. Ask your parts supplier if they stock a line of fleet brake pads with an application-specific pad for the Sprinter. The Sprinter has wear sensors on the in-board pad. The sensors must be replaced if the light is on.
What kind of bolts do I need for my Sprinter van?
For second-generation vehicles, there are two specifications for M10 and M8 guide pin bolts. M10 bolts should be tightened to 24 ft/lbs. M8 bolts need to be tightened to 48 ft/lbs. The caliper brackets use torque-to-yield bolts. Tighten the bolts to 59 ft/lbs and turn 40 degrees.
Where is the brake light on a sprinter?
2. Check your brake light switch, located at the top of the brake pedal lever. if it is stuck on or intermittently sticking on the truck thinks you are trying to slow down while you have your foot on the gas. Computers don;t like these kind of messages so it thinks you have a problem. Click, on goes the light. 3.
What kind of brake system does a Dodge Sprinter use?
In the rear, there are two different brake systems on the 2500 and 3500 model Sprinters. The 2500 uses a single piston floating caliper, and the 3500 uses a dual piston floating caliper. Both versions use a drum-in-hat emergency brake. The 3500 version also has a dual wheel rear axle setup.
Is there a recall on Daimler sprinter trucks?
Repairs will be performed for free at Daimler Trucks service centers. The NHSTA recall number is 18V-742. Separately, Daimler Vans USA is recalling 76 Freightliner Sprinter 2500 and 3500 and Mercedes-Benz Sprinter 2500 and 3500 vehicles from the 2018 model year built from July 4 to July 19, 2018.
Is there a recall on Daimler Freightliner?
Daimler Trucks received a field report in late July of brake lights remaining on after the brake pedal was released. The truck maker reviewed other returned parts with supplier Honeywell International through October and decided to conduct a safety recall. Dealers and customers will be notified of the recall Dec. 17.