What to do if your Airmatic suspension goes bad?
If a problematic AIRMATIC suspension comes into your shop (one that is dead or intermittently leaving the vehicle on the bump stops), one of the first things to check is the high-amperage fuse for the compressor. The relay can fail on either the “on” or “off” position.
What happens when the air suspension compressor quits working?
Typically when the air suspension compressor quits working, the whole car may lower to the ground and fail to raise. You press the button to raise the car, and nothing happenes. If the air suspension compressor works as designed, you will hear the compressor engage and run for several seconds.
Where is the fuse for the air suspension compressor?
Also, check the fuse for the air suspension compressor. On the Mercedes-Benz S-Class, the fuse box that contains the air suspension compressor relay and fuse are located on the right (passenger side) of the engine. Look at the 40 AMP fuse F32, make sure that it is not blown.
When did the Mercedes Benz Airmatic suspension system come out?
The Mercedes-Benz AIRMATIC suspension system was introduced in 1999 on the S-Class and has subsequently been used on the E-Class and most of the automaker’s SUVs. The system employs electronically controlled air springs that provide an ideal balance of ride comfort and handling.
How does the Mercedes-Benz Airmatic suspension work?
The suspension is also adaptive and automatically switches the damping profile to Sport 1 above 100 mph. The compressor provides the system pressure for raising the vehicle as well as a pressure relief valve for lowering it. The compressor relay is responsible for starting and stopping the compressor.
Typically when the air suspension compressor quits working, the whole car may lower to the ground and fail to raise. You press the button to raise the car, and nothing happenes. If the air suspension compressor works as designed, you will hear the compressor engage and run for several seconds.
Also, check the fuse for the air suspension compressor. On the Mercedes-Benz S-Class, the fuse box that contains the air suspension compressor relay and fuse are located on the right (passenger side) of the engine. Look at the 40 AMP fuse F32, make sure that it is not blown.
What to do if there is no power to the air suspension pump?
If there is no power going to the air suspension compressor, check the air suspension fuse and relay. Here is a picture that shows no power to the air suspension pump. The next step would be to use a professional diagnostic scanner such as the iCarsoft MB II to check the fault codes for the Air Suspension Control Unit.