What is the engine code for a 2003 C230 Kompressor?
2003 mercedes c230 kompressor, P200B B6/1 camshaft hall sensor… Owner Brothers Restoratio… Got code Po366 on 03 230. PO366 NO… It’s a 05 c230 workshop foreman /master… Check engine light with codes 1203, 1207 0764 and 0765. Cam check engine light with codes 1203, 1207 0764 and 0765.
Is the camshaft adjuster on a Mercedes C230 Kompressor?
The car also had code P2054 camshaft adjuster, but it hasn’t come back since clearing codes, both cam solenoids on the front of the engine tested good at 4.5ohms. Any ideas what might be wrong? Have these cars had any problems with the cam adjusters going bad? Since it’s a timing chain not a belt I don’t see how it could have jumped teeth.
What’s the fault code for a 2001 Mercedes Benz?
Click to expand… For the ML class it does not apply to the 2001 models. Also the fault code in the bulletin is for DTC B9103 and DTC B9123. No others would be covered by the DTB. Post # 34 in this thread lists the DTB the parts, and all affected models.
What is fault code b1859 on Mercedes Benz?
There is a known issue with poor connection in the lines to the steering column module that connect to the airbag for fault code B1859. There is a repair that involves repairing the wiring in the loom to this module as the SRS control module sees too high a resistance to the drivers airbag.
Are there any problems with the Mercedes C230 Kompressor?
This feature is not available right now. Please try again later. After 15yrs of use the Mercedes Benz C230 Kompressor starts to develop a lot of problems from Mass air flow, Throttle body, Pedal, intake Manifold, Transmission, Fuses, cooling system, alternator etc.
What is the Mercedes Benz code for intake leak?
Tech notes. Mercedes Benz Code = 0337 Self-adaptation of mixture formation for enrichment at partial load for the right cylinder bank is above the permissible limit. (P0171) If the P0171 is combined with the P0174 code, it’s very likely that the problem is caused by an intake leak.
Where is the fault code stored in a Mercedes Benz?
This fault code is stored in the Engine Control Module (ECM) when the ECMis no longer capable of controlling the air fuel ratio. For correct operation of the catalytic converter the ECMis required to keep the air fuel ratio (AFR) at approximately lambda 1, this equates to an AFR of 14.7:1 by mass.
What is the Mercedes Benz code for too lean bank?
Mercedes Benz Code = 0337 Self-adaptation of mixture formation for enrichment at partial load for the right cylinder bank is above the permissible limit. (P0171) If the P0171 is combined with the P0174 code, it’s very likely that the problem is caused by an intake leak.