Why is the window not resetting on my CLK?

Hi, my 2001 CLK coupe is a Sunday car. So much so it’s been sat in the garage for a while. Battery flat. Charged the battery fully and took it for a good run, however the drivers window hasn’t reset to the 1″ drop when you open the door to get out.

Why does my Mercedes sunroof not close properly?

Mercedes windows or sunroof does not close properly. MB window closes then drops an inch or a few centimeters. The express up or down (one-touch) feature does not work. Either the windows or the sunroof seems to require several clicks when closing or opening. How do you re-synchronize Mercedes windows? Close all the doors of your car.

How do you close the windows on a Mercedes?

Close all the doors. With the key in position 1 or 2, push the window button until it is completely open. Hold the button for 5 seconds. Pull it up to close and hold again for another 5 seconds.

Why are my power windows not working on my Mercedes C class?

A good way to tell if this is the root of your problem is if one of the windows does not move up or down, but the others do. Another way to diagnose this problem is if you test the window relay with a voltmeter—if it has power, the problem is in all likelihood the motor. A new power window motor for a C-Class is about $60.

What causes a power window to stop working?

The problem occurs after countless hundreds of times of opening and closing the door. At some point the wiring bundle that goes from the door into the door post will become brittle and the wires will actually break.

How to fix no sound issue in Windows 10?

How to fix “No Sound” issue on Windows 10: Right-click the sound icon in the taskbar, at the bottom right of the screen. Select Playback Devices from the menu. Choose the current playback device (by-default, it’s set to speakers) and double-click on it to open its properties. Go to Advanced tab and change the bit rate to either,…

Where are the sound settings on Windows Vista?

Windows Vista, 7, 8, and 10 users Open the Control Panel. In the Control Panel, if viewing by Category, click the Hardware and Sound option, then click Sound on the next screen. In the Sound window, click the Sounds tab.

How do you disable a sound in a program?

In the Sound window, click the Sounds tab. In the Program Events section, find the sound you want to disable or change. Then, in the drop-down list in the Sounds section, select (None) if you want to disable the sound or select a different sound file if you want to change the sound.

How to resolve no sound on Windows computer?

Click on the one you would like to use by going to the taskbar and clicking the sound option. Then click on the name of your sound speakers, i.e. Conexant SmartAudio HD, then choose your preferred sound system. Thanks! My computer is always installing update 9 of 9. What causes this?

How do I disable all sound effects in Windows 10?

Select Hardware and Sound from the Control Panel, and then select Sound. On the Playback tab, right-click the Default Device , and then select Properties . On the Enhancements tab, select either the Disable all enhancements or the Disable all sound effects check box (depending on which option you see), select OK , and try to play your audio device.

What should I do if my audio is not working?

You may also need to change the audio output to the correct device. Restart your computer. Before proceeding to another method, try to reset your audio by restarting your computer. If your computer loads up with the sound is fixed, you needn’t continue. menu and select System. This opens your computer’s settings.

Where do I find the sound troubleshooter in Windows 10?

Select the device you want to troubleshoot and then continue through the troubleshooter. You can also launch the troubleshooter from audio Settings. Select Start > Settings > System > Sound > Troubleshoot. If running the troubleshooter doesn’t help, continue to the next tip.

How to fix a leak in a Mercedes convertible?

Leak at the o-ring at any of the lift cylinders. Inspect in the trunk area for hydraulic fluid leak. Low fluid in the convertible top reservoir. Start by pressing the convertible switch. Do the windows go down? If the windows don’t go down, make sure the trunk compartment divider is pulled out. Next, check the fuse for the convertible top.

Why does my CLK soft top roof not open?

CLK soft-top roof won’t open. Windows go down but no action… CLK soft-top roof won’t open… CLK soft-top roof won’t open. Windows go down but no action on the softtop. Trunk cover is located properly and switch is working.

Close all the doors. With the key in position 1 or 2, push the window button until it is completely open. Hold the button for 5 seconds. Pull it up to close and hold again for another 5 seconds.

What to do if your Mercedes convertible goes down?

If the windows don’t go down, make sure the trunk compartment divider is pulled out. Next, check the fuse for the convertible top. This is usally a 40 A fuse. If it is blown, replace it with a new fuse with the same ampere rating.

What to do if your Mercedes convertible is not working?

Check the convertible top relay as well. Swap it with a known working relay that is identical. You can also bridge the top relay for a couple of seconds to see if the hydraulic pump start to run. Replace the convertible top relay if necessary, PN 0025421319. Next, check the micro switch where the divider locks.

What causes a Mercedes convertible top to move slow?

Mercedes Convertible top moves very slow 1 This can be caused by low fluid level or air in the hydraulic lines. 2 Air in the hydrauilc lift cylinders 3 It can be caused by binding of mechanical arms. 4 Weak convertible top lift cylinder. 5 Weak battery or ground connection. 6 Leak at the o-ring at any of the lift cylinders.

How do you roll down the windows on a late model car?

This same procedure works in just about every late model vehicle. Unlock, hold the button down, and the windows all roll down. Similarly, if you hit the lock button and hold it down, all the windows will roll back up again. Photos by Amrinder Kaur. Writer, editor, lousy guitar player, dad.

How do I get my car window to go up?

When the window is fully up, press and hold the down button until the window is fully down. Release the button, and press and hold down again for 5 seconds. Then release and do the same for the window to go up again.

Why do my car windows roll down randomly?

Driver and passenger side windows will roll down when car is locked and we are away from it. The windows roll down to the same level on each side, but not to the same same level twice. It’s random. Happened yesterday after a few months of no such activity. Driver and passenger side windows will roll down when car is locked and we are away from it.

What to do when your car’s windows go down?

If your windows do happen to go down after pushing the unluck button for three seconds, rather than starting up your car to roll the windows up, you can also put your key into the drivers door lock (which is the only lock available to put it into on the MO) and turn the key in the locking direction and that will raise your windows back up again.

What to do if left rear window does not work?

Hold in the up position for about 5 seconds. That should normalize the fronts. For the rears you may also need to roll them down using the same method. After they are normalized the auto feature should work on all the windows. If it still doesn’t work you may have a fault or may need a code cleared.

Why are the windows rolling down in my Mercedes?

You may have a fault in the PSE vacuum control module which is mounted on the right side of the trunk. This pump/module receives signals from sensors all over the car, particularly the crash sensor which unlocks all doors and rolls down all windows when the sensor is triggered or faulted.

Navigation