What kind of engine does a Mercedes Benz 380SL have?
Compare Mercedes Benz Series 107 Models Model Years # Built Engine BHP 280SL 1974-1985 25,500 2746cc I6 185 280SLC 1974-1981 10,700 2746cc I6 185 300SL 1985-1989 N/A 2962cc I6 188
Why does my Mercedes 380SL take so long to start?
Why would a Mercedes 380SL take about twenty seconds to start every time the key is turned despite changing the warm up regulator? This could have something to with the fuel pressure. To begin with, the cold warm up regulator pressure is because there won’t be enough cold enrichment if the pressure is too high.
How to check the oil level in a Mercedes 380SL?
To check the oil levels, let the car sit overnight and wait for the oil to drain back into the pan. This is typically when a reading that is most accurate is obtained. When the car develops a problem, half of the issue is trying to pinpoint the origin of it before an owner can figure out a way to fix it.
What is the vacuum diagram for a Mercedes 450SL?
OK, so this is the vacuum diagram to a 1978-1980 450SL with the K-Jet system. Click the picture to see it full size. 3) Switch over valve – this changes the timing of the engine based on whether the AC compressor is running or not. 4) EGR Valve – part of the emissions controls.
How many years does a Mercedes Benz 380SL last?
Years The Series 107 Mercedes Benz 380SL Was Produced: SAVE BIG $$$$$$ IN REPAIR AND MAINTENANCE COSTS!!!
How is idle speed of Bosch KE Jetronic controlled?
* The electronic control unit supplies a specific voltage to the air valve which determines the respective valve opening and thereby the engine speed. * The nominal idle speed is controlled depending on temperature, between 1200 RPM at about -23°F (-30°C) to 900 RPM at 158°F (70°C).
How many fuel pumps does a Mercedes 560 have?
If the fuel pump relay receives the number impulses corresponding to the maximum engine RPM, the contact between circuit 30 and 87 is interrupted and the fuel pump is turned off. The 420 and 560 models are equipped with 2 fuel pumps. All other models use one pump.
Years The Series 107 Mercedes Benz 380SL Was Produced: SAVE BIG $$$$$$ IN REPAIR AND MAINTENANCE COSTS!!!
What does 400psi mean on an air conditioner?
Expecting 400psi means it is approx 200 degrees where you live. If the low side is truly zero, then you need to research how to properly fill an empty system. If that haynes manually actually says it needs to be 400psi on the high side, throw that book away and get a better manual. You do not fill based on pressures.
What should the high side pressure be on a Honda Accord?
It’s rated and charged at 60psi (low side), which is normal. The high side pressure is low, at around 120 psi when it should be much higher in the 400 275-300 range. The pressures do equalize when the engine is off.
How does the R134a high and low side A / C pressure chart work?
R134a Pressure Gauge Chart This chart details how ambient temperature correlates with the system refrigerant charge pressure, and how it affects high and low side psi readings. It can be used for recharging refrigerant, or to diagnose an a/c system based on pressure readings from your gauges.
Expecting 400psi means it is approx 200 degrees where you live. If the low side is truly zero, then you need to research how to properly fill an empty system. If that haynes manually actually says it needs to be 400psi on the high side, throw that book away and get a better manual. You do not fill based on pressures.
What is the color of a 1982 Mercedes-Benz 380SL?
1982 Mercedes-Benz 380SL Here is a 1982 Mercedes-Benz 380SL featured here with 46,372 is available in its factory color code #568 Signal Red with a black interior. The vehicle comes with a clean Ca…
What kind of vacuum does a Mercedes 380SL have?
The 380SL and subsequent 560SL have a push-button, vacuum-operated system, which has its own problems, including vacuum accumulators that go bad with regularity. *Values provided by Black Book ( BlackBookUSA.com ).
Where to find model number of Shop Vac?
Our current model Shop-Vac®schematic drawings are available for download. Simply enter your product’s model number or the first few digits of the model number to search our library of schematics. Search To locate your product’s model number, simply find the product’s label showing UL listing information and electrical specifications.
Where can I buy a shopvac wet VAC?
Learn more about our SVX2 ® powered units, specialty vacs, and portable options, available at your local hardware store.
Where is the fuel pump on a Mercedes Benz?
The fuel pump is located under the car on the right side below the fuel-filling inlet near the fuel tank. Consult the article on safely jacking up your vehicle and placing your M-B on jack stands. Be sure to always wear safety glasses anytime you’re working under your car.
Is the K-Jetronic with lambda system used on Mercedes?
The K-Jetronic WITH LAMBDA system is used on a number of vehicles from Porsche, Volvo, to VW, and of course Mercedes. For our purposes, we are talking about the 1980 450SL, and the 1981 thru 1985 380SL. The system consists of four basic sections:
What’s the top speed of a Mercedes SL?
Mercedes Benz SL (R107) 420 SL Performance Top Speed : 213 km/h or 132 Mph Acceleration 0 to 100 km/h (0 to 62 mph) : 9.0 s Mercedes Benz SL (R107) 420 SL Size, Dimensions, Aerodynamics and Weight
Is the 1981 Mercedes-Benz 380SL a classic?
1981 Mercedes Benz 380SL convertible classic 2-door roadster in fantastic condition inside and out. 73,000 miles. Please Note The Following Vehicle Location is at our clients home and Not In Cadi…
The K-Jetronic WITH LAMBDA system is used on a number of vehicles from Porsche, Volvo, to VW, and of course Mercedes. For our purposes, we are talking about the 1980 450SL, and the 1981 thru 1985 380SL. The system consists of four basic sections:
How to troubleshoot a Bosch D Jetronic engine?
injector shuts off. air valve and let air to be drawn into it.If the engine speed increases greatly,replace the auxillary air valve. 2)Temperature sensor 2 is also critical to cold operation. confirmed first as they are more likely to cause this problem.
What is the RPM of Bosch KE3 Jetronic mixture?
RPM signal, 0 to 12 V, 4 pulses per revolution. A frequency of 43.3 pulses per second corresponds to the desired idle speed of 650 RPM. (To check your tachometer you could measure the frequency at this pin and multiply by 15 to get RPM.) This signal is derived from the ignition amplifier and is synchronized with the low side of the ignition coil.
Can a Mercedes 450SL be adjusted with k-jet?
Further adding to confusion and frustration with K-Jet adjustment, is that even from the same year, some manufacturers utilize different options with the same Bosch hardware making their adjustment procedures similar yet incompatible with Mercedes 450SL/380SL procedures. For instance, on the Bosch ECU, Mercedes does not use Pin 17, but VW does.
Is there a series 107 Mercedes Benz 350SLC?
Years The Series 107 Mercedes Benz 350SLC Was Produced: SAVE BIG $$$$$$ IN REPAIR AND MAINTENANCE COSTS!!!
When did Mercedes Benz stop making the 350 SLC?
Starting in 1980, the 350, 450 and 450 SLC 5.0 models (like the 350 and 450 SL) were discontinued in 1980 with the introduction of the 380 and 500 SLC in March 1980.
Where can I buy a Mercedes brake light switch?
You can buy a new brake light switch on Amazon for less than $15 USD, just do a search for Mercedes-Benz Brake Light Switches. In the video below you will can see how easy it is to replace the brake light switch on a Mercedes-Benz E-Class.
What should I do if my Mercedes Benz won’t start?
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.