Why does the SRS light come on when an adult is in the seat?
This tells the SRS to fire the passenger airbag if an adult is in the seat. If this sensor is not working properly, it can cause the warning light to illuminate. Solution: Check that the wiring connector is secure, the wiring is intact and the seat sensor is operational.
What does SRS warning light on dashboard look like?
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person.
Is there a way to test the seatbelt buckle?
My mechanic a couple years back wrote on invoice that I had SRS code 24 (driver seatbelt buckle switch) and code 25 (passenger seatbelt buckle switch) appeared. Looking for a solution. Is there a way to test the seatbelt buckle to see SRS code is coming from the buckle?
Can you cut the wires on a SRS light?
Cutting the wires will not work, since the controller can sense an open-circuit fault as well as a short-circuit fault. But Carlos is on the right track, for what would surely work would be to unplug the switch at the connector under the seat and wire a 100-ohm resistor across the terminals.
This tells the SRS to fire the passenger airbag if an adult is in the seat. If this sensor is not working properly, it can cause the warning light to illuminate. Solution: Check that the wiring connector is secure, the wiring is intact and the seat sensor is operational.
Why is there a warning light on my front seat?
Have the SRS computer reset if necessary. Your front passenger seat contains a sensor that can tell whether someone is sitting there, and how much they weigh. This tells the SRS to fire the passenger airbag if an adult is in the seat. If this sensor is not working properly, it can cause the warning light to illuminate.
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person.
How does the SRS know to fire the airbag?
Solution: Check inside the seat belt buckle for foreign objects and remove them. Have the SRS computer reset if necessary. Your front passenger seat contains a sensor that can tell whether someone is sitting there, and how much they weigh. This tells the SRS to fire the passenger airbag if an adult is in the seat.
What does the SRS light on a car mean?
The SRS light is a warning light that indicates an issue with the airbags system. Since it’s linked to the airbags, it’s also commonly known as the airbag light. In most cars, it looks like a side view of the driver or passenger in a seat with the seat belt on. There is also a large circle in front of the passenger, which indicates the airbag.
Why is the SRS light on my front seat yellow?
A really common case is the connectors under your front seats. The connectors of an airbag system are often yellow. When you are moving the seats forward and backwards the connectors will move a little bit everytime, and it may cause bad connections between the airbag control unit and the airbags/seatbelt airbag and it will cause an error code.
Do you need to reset the SRS light?
You should never just turn off the SRS light. This doesn’t fix any of the problems; it only stops the alert from occurring. The only time you should reset the SRS light is after you repair the initial problems. With an OBDII scanner, you can erase the trouble codes and reset the light.
Have the SRS computer reset if necessary. Your front passenger seat contains a sensor that can tell whether someone is sitting there, and how much they weigh. This tells the SRS to fire the passenger airbag if an adult is in the seat. If this sensor is not working properly, it can cause the warning light to illuminate.