What to do if the backlight on your Speedo stops working?
Discussion in ‘ Sportster Models ‘ started by NCBILL, Apr 15, 2017 . My 06 Sportster Service and Repair manual from HD states that if the backlight on my speedo quits working, there is no bulb replacement, and the owner will need to replace the unit itself.
How can I tell if my speedometer sensor is bad?
On most cars sold today, this will be indicated by the cruise control light being illuminated on the dashboard – even if it’s not engaged. If you experience this problem, it’s possible that the speedometer sensor needs to be replaced. 3. Check Engine Light comes on
Where does the Check Engine light come on?
Check Engine Light comes on The speedometer sensor is located inside the transmission and attached to a driveshaft, which impacts multiple functions of the car. Due to this fact, it’s possible that the Check Engine Light will light up on the dashboard if a sensor problem is discovered by the vehicle’s CPU.
Why does the speedo on a Harley Davidson stop working?
The magnetic speed sensor pick up gets fouled from the metal shavings in the transmission which causes the speedo to stop working and the directionals to stop self canceling because of no input to the ECM from the sensor. The ECM thinks that the bike is standing still because of no input.
On most cars sold today, this will be indicated by the cruise control light being illuminated on the dashboard – even if it’s not engaged. If you experience this problem, it’s possible that the speedometer sensor needs to be replaced. 3. Check Engine Light comes on
Check Engine Light comes on The speedometer sensor is located inside the transmission and attached to a driveshaft, which impacts multiple functions of the car. Due to this fact, it’s possible that the Check Engine Light will light up on the dashboard if a sensor problem is discovered by the vehicle’s CPU.
Is the speedometer not working and ABS and brake light stay?
Re: Speedometer not working and abs and brake light stay… You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert whose answer got voted for 2 times. Re: Speedometer not working and abs and brake light stay…
How does the speedometer work in a car?
Today’s cars and trucks have electronic fuel injection, which is controlled by the onboard computer. The EFI supplies fuel to the engine based on input from multiple sensors; one of which is the speedometer sensor.
What to do if your dash light does not work?
#Test the dashboard light bulbs. If the fuses are working properly, check for a blown bulb in the dashboard. Following the manufacturer’s instructions, disconnect the battery while working on the dash, remove the faceplate covering your vehicle’s dashboard gauge panel. Remove the screws holding the plate on. Carefully remove the faceplate.
Why is my Speedo and odometer not working?
Mine is not working and neither is the odometer. Does one failed component (speedo backlight) affect the other (odometer readout)? NCBILL likes this. Click to expand… Will do, brother. Check all fuses first. Any codes? Take a look here.
What to do if you have no lights on your dashboard?
if you discover you have no lights on your car’s dashboard or dash and can no longer see the gauges at night, here are the top 4 things you can do to repair the problem yourself. if none of the 4 solutions work I provided a fifth and totally redneck solution too.
What to do when your Mercedes goes into limp mode?
You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.
Where is the fuse on the dash light?
The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.
Who are the manufacturers of the Harley Davidson Road King dash?
Whether you choose a Road King dash kit with all the components, or a Harley-Davidson Road King dash insert, we have options from all the right brands like Dakota Digital, Yankee Engineuity, Marlin’s, Auto Meter, V-Twin Manufacturing, Compu-Fire, J&P Cycles, Thunderheart, Kuryakyn, and more.
What does red security light on speedometer mean?
Red Security Light on Speedometer. The red security light coming on means there is an issue somewhere. But, it might not necessarily mean a problem with your security system, especially if you don’t have one.
Whether you choose a Road King dash kit with all the components, or a Harley-Davidson Road King dash insert, we have options from all the right brands like Dakota Digital, Yankee Engineuity, Marlin’s, Auto Meter, V-Twin Manufacturing, Compu-Fire, J&P Cycles, Thunderheart, Kuryakyn, and more.
What is the diagnostic code for a Harley Davidson Road King?
Cant find 88 on the list, Psspt method gives the d01CLr – d10CLr followed by a PPU then the number 84172. I looked for this 84172 number as a part number and found no such part. I aint rich who here is?
What does the Check Engine light mean on a Harley Davidson?
Check Engine Light. When the check engine light comes on, it indicates that something is happening or, in some cases, not happening. The easiest way to handle this is to do a “code check.”. The code will indicate what problem you’re facing.
When do the warning lights come on on a Harley Davidson?
Unfortunately, you can drive your brand new Harley off the lot and not get five miles down the road before a warning light comes on. Or, you could be a thousand miles from home when they start flashing. What do they mean?
How to start a Harley Davidson that wont start?
Insert 1 wire into the female terminal that would be #30 in the fuse panel socket. Insert the other WIRE (NOT END of 1st wire) into #87 of the fuse panel socket. 6) Make SURE bike is in NEUTRAL. 7) Turn on ignition ON and Kill switch to run. When you touch both of your installed wires together DOES bike crank./start? Click to expand…
Is there a problem with my speedometer on my Harley?
& filed under Harley Tips. First let me say, thank God for you guys. It’s great to have an alternative to being bent over by the “Stealership” wrench jockeys that are more into selling parts than anything else.
Where is the starter on a Harley Davidson Dyna Glide?
Perhaps the easiest place to begin is at the starter solenoid on the right side of the motorcycle. Pull back the protective rubber boot and ensure the positive battery cable (yellow arrow) is securely tightened to the solenoid terminal.
Insert 1 wire into the female terminal that would be #30 in the fuse panel socket. Insert the other WIRE (NOT END of 1st wire) into #87 of the fuse panel socket. 6) Make SURE bike is in NEUTRAL. 7) Turn on ignition ON and Kill switch to run. When you touch both of your installed wires together DOES bike crank./start? Click to expand…
What should the voltage be on a Harley Davidson Dyna Glide?
Use a voltmeter to measure the available voltage at the battery. A battery that is 100% charged will have approximately 12.6 volts, whereas a battery with a 0% charge will read 11.8 volts or lower. If your battery is low, charge the battery on a setting no higher than five amps for a few hours.
& filed under Harley Tips. First let me say, thank God for you guys. It’s great to have an alternative to being bent over by the “Stealership” wrench jockeys that are more into selling parts than anything else.
What to do if your speedometer is not working?
Speedometer not working… Speedometer lights up and does everything else but move the needle off of zero. I checked the connection under the instrument console, ran a diagnostic to find out that all codes are clear.
Why are the lights on my dash not working?
Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.
What happens when the speedometer sensor is not working?
The speedometer sensor is also a critical component in the proper operation of a vehicle’s cruise control. When the sensor is not working correctly, it will not send a signal to the CPU, which impacts the vehicle’s ability to set the throttle for a desired speed.
Why does my Speedo not work on my Harley?
Speedo works when it wants but only at highway speeds and again randomly. Now blinkers are starting too work intermittently. Any ideas? Don’t believe both switches would go at same time, Short maybe or relay. Not sure and I would appreciate any ideas. Might be a failing Harley speed sensor. Remove the sensor and see if it needs to be cleaned.
Is it time for a new speed sensor?
Perhaps it is time for a new speed sensor? or is it time for a new speedo. 2000 softail deuce. Okay. I replaced the speed sensor ($58) from the dealer.
Why is the speed sensor on my Harley not working?
Don’t believe both switches would go at same time, Short maybe or relay. Not sure and I would appreciate any ideas. Might be a failing Harley speed sensor. Remove the sensor and see if it needs to be cleaned. Sometimes, fine metal shavings or or a paste like film from normal transmission wear can cover the end of the sensor.