How to operate the top switch on a convertible?

HOW TO OPERATE THE TOP SWITCH The top will work only in the “Park” or “Neurtal” positions, with key turned to “ACC” or “START”.

What kind of top switch do I need for a 1969 Pontiac GTO?

Here is an excellent replica convertible top switch and harness for your 1969-1972 Pontiac GTO or LeMans convertible. 1969 Pontiac Firebird convertible top switch. Here is an excellent replica convertible top switch and harness for your 1969 Pontiac Firebird convertible.

What kind of top switch does an Oldsmobile Cutlass use?

1968-1969 Oldsmobile Cutlass or 442 convertible top switch. Here is an exact replica convertible top switch and wiring lead for your 1968-1969 Oldsmobile Cutlass or 442 convertible. Here is an excellent replica convertible top switch for your 1957-1958 Oldsmobile 88, Super 88, Starfire, Dynamic & 98 convertible.Ships USPS Priority mail for $6.00.

Where can I get a replacement roof switch?

OE part numbers for the switches are listed below. The factory replacement parts come with pigtails and plugs. SLK owners who possess soldering skills can likely find comparable micro-switches for a few bucks at an electronic parts supplier, then add the necessary pigtails themselves.

HOW TO OPERATE THE TOP SWITCH The top will work only in the “Park” or “Neurtal” positions, with key turned to “ACC” or “START”.

What should I do if my convertible top is not opening?

Press and hold the central lock toggle switch in UP position for 5 seconds. This will start the opening process. 4) If still no luck, checked the fuses (there are two) powering the roof. 5) It could be that the battery is weak – the opening process needs a lot of power. Try to charge the battery or install a new battery.

What causes a convertible top to move slowly?

Convertible top moving very slowly. Often caused by a weak lift cylinder. It can also be caused by binding or convertible motor failure. If a convertible system may seem complicated at first, don’t let fear stop you from carrying a few basic troubleshooting steps yourself.

How many volts does a convertible top need?

Every time you press the convertible switch, you should read between 11-13 volts at the pump. If you are not getting any current at the hydraulic motor, you may have an electrical problem or a defective switch. There are between 4 and 10 micro-switches installed in your convertible required to run your top.

What does it mean when your convertible top stops working?

It is great that you have performed the reset procedure already as that is typically the first step in diagnosis. In most cases when the electrical noise is heard and the convertible top motor is heard trying to work this indicates that the top is receiving power.

What to do if your Mercedes convertible is not working?

Check the convertible top relay as well. Swap it with a known working relay that is identical. You can also bridge the top relay for a couple of seconds to see if the hydraulic pump start to run. Replace the convertible top relay if necessary, PN 0025421319. Next, check the micro switch where the divider locks.

Can a CLK 430 convertible top go down?

I just got my 2002 CLK 430 and can’t get the top to go down. I think I messed up as I first tried, the back of the top disengaged and popped up, the metal car portion popped up and it started to retract.

Navigation