What do you measure valve lash with?
Simply use a feeler gauge and slide the tab of the correct thickness between the tip of the valve stem and the end of the rocker. The camshaft manufacturer or your engine builder will give you the preferred lash range-it’s usually between 0.010- and 0.024-inch for a race engine.
What was the weight of a 1986 Mazda B2000?
The Mazda B2000 was 61.6 inches high, 193.7 inches long and 65.7 inches wide with a wheel base of 117.5 inches. The B2000’s front track was 55.1 inches and its rear track was 55.5 inches. The curb weight of the Mazda was 2,788 pounds while the gross vehicle weight was 5,401 pounds.
What kind of suspension did a Mazda B2000 have?
The suspension was composed of a torsion bar in front and a Hotchkiss leaf-spring suspension in the rear. Steering was of the ball and nut — or gear box — type. Its turning radius was 39 feet, 4.5 inches. The Mazda B2000 was 61.6 inches high, 193.7 inches long and 65.7 inches wide with a wheel base of 117.5 inches.
What’s the intake valve lift on a Mazda 2.0L?
The LF-DE intake valve lift is 8.8 mm; while for the LF-VE, the intake valve lift was increased up to 9.1 mm. They both have the exhaust valve lift of 7.7 mm. The LF-VE engine was equipped with the S-VT system (Sequential Valve Timing) and a variable length intake manifold.
What kind of camshaft does a Mazda 2.0L have?
The camshafts are driven by a link grounding type chain automatically tensioned using the engine oil pressure and the spring (the timing chain is maintenance-free). The head has the 39 degrees angle between the intake and the exhaust valves. There are solid bucket tappets, and the valve gaps need adjustment periodically.
The Mazda B2000 was 61.6 inches high, 193.7 inches long and 65.7 inches wide with a wheel base of 117.5 inches. The B2000’s front track was 55.1 inches and its rear track was 55.5 inches. The curb weight of the Mazda was 2,788 pounds while the gross vehicle weight was 5,401 pounds.
The suspension was composed of a torsion bar in front and a Hotchkiss leaf-spring suspension in the rear. Steering was of the ball and nut — or gear box — type. Its turning radius was 39 feet, 4.5 inches. The Mazda B2000 was 61.6 inches high, 193.7 inches long and 65.7 inches wide with a wheel base of 117.5 inches.
When did the Mazda B2000 pickup truck come out?
The Mazda B2000 was produced from 1986 to 1993. It was a smallish pickup truck that seated three on a bench in the cab of the truck.
What are the torque specifications of a Mazda 2?
192 21.69 FS – Lower Block Reinforcement Bolts Type: Bolt Engine Mount To Engine Block 60 720 81.35 FS – Front/Back/Left Mount to Engine Type: Bolt Engine Mount To Engine Block 65 780