How do you change the timing on a Mazda 626?
Use your wrench to tighten the distributor lock-down bolt and remove the jumper cables from the carburetor switch. Remove the timing light and turn off the idle speed control. Close the hood to your engine, remove the wheel chocks from your wheels, and bring your engine back to its pre-operation state.
How can I tell if my Mazda 626 is running?
You can use a noid light, available at parts stores, to see if the electrical circuit is working. You can also measure the resistance of the injectors. The resistance should be approximately 13.8 ohms at 68 F. Other possibilities: Weak fuel pressure. You can check this with a fuel pressure gauge.
Do you have to reprogram your Mazda keys?
Reprogram Your Mazda Keys. In order for you to have a spare key that will start the car, you need to start with two working keys — or you will have to take the car to the Mazda dealership. This keeps unauthorized people from making copies of your keys.
How do you change the lock on a Mazda?
Use the following procedure to change the setting. Switch the ignition off and close all of the doors and the liftgate. Open the driver’s door. Within 30 seconds of opening the driver’s door, press and hold the LOCK button on the key for 5 seconds or longer.
How to add a duplicate key to a Mazda Miata?
1998-2003 Mazda 626 – 2000-2004 Mazda Miata, MPV ORIGINATE A NEW KEY/ADD A DUPLICATE KEY: 1. Insert a new key into ignition and turn it to “ON”. Turn back to the “LOCK” position. Repeat until this has been done five times. Do not leave the key in any position for more than one second during this step. 2. Turn the key back to the “ON” position.
How do you program the key on a Mazda 3?
Basically, have 2 programmed FOBS and the new key to program. Insert programmed key, turn to on, then off. Repeat for key 2 and then the new key #3. I have done it quickly in sequence, and also slower waiting for the key light (?) to go out, but the third key will not work.
What to do if your Mazda keyless remote is not working?
Simultaneously hold the open and the lock button down for 60 seconds. This should reset the system. If it worked, the interior car lights will go on and off. You may even hear the horn beep.
How to program the transponder on a Mazda 3?
1. Insert one of the pre-programmed transponder keys and turn the ignition to “on”, leave on for at least one second (I wait until the red key symbol in the instrument cluster extinguishes), remove the key from the ignition. 2.
What should the idle speed be on a Mazda 626?
Bring the engine to an idle speed of 500 to 800 rpm if you have an automatic transmission, or 550 to 800 if you have an automatic transmission. Exit your Mazda 626 with the emergency brake firmly engaged and open the hood to gain access to your engine.
Is it really that hard to timing a Mazda engine?
Timing The Mazda/Ford 2.0/2.3/2.5 Engines. Part 1 – Is It Really That Hard? – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.